Disc brake conversion/ brake lines
#1
Disc brake conversion/ brake lines
just installed a disc brake Conversion on my 72 cutlass and at the point of getting the lines hooked up but now thinking that I should just replace those as well since I would have to modify them anyway , any advice as to buy a prebent kit vs making them my self from scratch. I’d like them to look good but not sure if they make the proper kit without modifying. My car was a drum/drum and has a distribution valve on the frame now but the new kit came with a new prop valve mounted to the master. Any advice / ideas welcome !
#3
Been looking at those but from what I understand the factory setup didn’t have the prop valve on the master so I’m not sure if they have the correct kit without modifying I’m going to call their tech line tomorrow
Thread
Thread Starter
Forum
Replies
Last Post
Mocephus
Eighty-Eight
12
October 1st, 2021 09:45 AM
68442Convertible
Brakes/Hydraulic Systems
2
June 8th, 2016 08:15 PM
Maverick
Brakes/Hydraulic Systems
6
June 26th, 2013 08:21 AM