Body sealer (for a/c heater box to firewall) vs butyl rubber for rear window
April 8th, 2018, 07:05 PM
#1
Chris
Thread Starter
Join Date: Jul 2011
Location: Southern New Jersey
Posts: 1,284
Body sealer (for a/c heater box to firewall) vs butyl rubber for rear window
https://m.ebay.com/itm/AMK-Products-...pid=1833199116 Hello. I am planning on using this product to seal my a/c heater blower to the firewall on my 72 cutlass. Can I also use this to set and seal my rear window or should I use butyl rubber?
Thank you!
Thank you!
April 8th, 2018, 07:27 PM
#2
Use the butyl for the heater box but for windows go modern and use window urethane .
http://www.tptools.com/Pro-Form-Buty...Tape,3408.html
http://www.tptools.com/Pro-Form-Buty...Tape,3408.html
April 9th, 2018, 09:41 AM
#5
Fresh butyl cleans easy with mineral spirits. Old butyl will flake off in chunks as it hardens up over time. I would not use urethane on the box as you usually have to cut it. Its very very permanent so for glass its perfect as you can cut it out but for hard tp reach spots it will suck
April 9th, 2018, 11:19 AM
#6
Chris
Thread Starter
Join Date: Jul 2011
Location: Southern New Jersey
Posts: 1,284
https://m.ebay.com/itm/Caulk-Wthrstr...MAAOSwjL5ZMYGV thank you for the replies. Some of you said rope caulk. Do you mean this stuff? Am I looking for a putty type material or a foam type material?
Last edited by Oldssupreme; April 9th, 2018 at 01:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
c-towndave
General Questions
4
May 3rd, 2015 07:55 PM
