EightballZ

hi guys,

i'm planning to completly overhaul the vacuum system on my toro (cruise control, brake booster and every other hose coming out of the intake manifold)

i got the manual with the vacuum hose routing..thats not the problem..but i cant find the sizes i need to use...like the diameter...the length is not that important...but the diameter is. so do u guys have any idea..or something like an overview?

i'm many miles away from my car..so i cant meassure myself...but i need to order them quickly.

thy and bye

Tony72Cutlass'S'

I'm gonna go with 1/8'' fuel line, that's what i used, make sure 1/8'' is stamped on it, because i believe that's the inner size of the tube, not the actual diameter of the rubber stuff.

You might also wanna pick up some 3/8'' fuel line for the rest of it.

Not sure if you have PCV on your toronado, but that's all 3/8's on my car (72) but if you havn't replaced your fuel line for awhile and you're already cutting tubes, may as well to avoid future issues.

-Tony

EightballZ

ok thx...i'll try