spacer use with roller cam - ClassicOldsmobile.com

Go Back  ClassicOldsmobile.com > Repair & Restoration > Engine > Big Blocks
spacer use with roller cam >

spacer use with roller cam

spacer use with roller cam

Reply

 
 
 
Old June 14th, 2018, 05:10 PM
  #1  
Registered User
Thread Starter
 
Join Date: Jul 2013
Posts: 39
spacer use with roller cam

Hi, sorry if this topic has been discussed before, I am looking for some info on the use of the shim/thrust washer when installing a roller cam on a 455. Is the shim required on install or is it only a use as needed item to set the endplay along with the cam bolt ?

Last edited by yellowrocket; June 14th, 2018 at 05:11 PM. Reason: added more info
yellowrocket is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cdrod
Small Blocks
6
September 3rd, 2015 08:43 AM
1978 Oldsmobile Omega
Small Blocks
8
August 12th, 2014 12:55 PM
JpMotorsports
Chassis/Body/Frame
10
May 15th, 2014 07:08 AM
Redog
Small Blocks
12
August 14th, 2008 06:56 PM
72RocketPower
Big Blocks
2
August 11th, 2005 04:51 AM


Thread Tools
Search this Thread