spacer use with roller cam
June 14th, 2018, 05:10 PM
#1
Registered User
Thread Starter
Join Date: Jul 2013
Posts: 78
spacer use with roller cam
Hi, sorry if this topic has been discussed before, I am looking for some info on the use of the shim/thrust washer when installing a roller cam on a 455. Is the shim required on install or is it only a use as needed item to set the endplay along with the cam bolt ?
Last edited by yellowrocket; June 14th, 2018 at 05:11 PM. Reason: added more info
Thread
Thread Starter
Forum
Replies
Last Post
