455 won't start ????
July 6th, 2017, 07:43 PM
#1
Registered User
Thread Starter
Join Date: Sep 2016
Posts: 67
455 won't start ????
i got a 455 motor used I replaced my starter with a mini torque starter I got 3 starts out of it won't start anymore so I sent the starter back and tried to crank it over to make sure it wasn't seized with torque wrench wouldnt move with plugs in so I pull the spark plugs and it cranks over by hand so anybody have a idea what mite be going on ???????
July 6th, 2017, 08:13 PM
#3
Hookers under Hood
Join Date: Nov 2013
Location: Ontario, Canada
Posts: 3,543
You may have burnt the fusible link , how did the wires look when you pulled the starter ? Could be anything really since its not seized, control module if equipped with HEI , corroded cable connections, battery drain, the list goes on.
Eric
Eric
July 7th, 2017, 03:18 AM
#4
Administrator
Join Date: Oct 2009
Location: Poteau, Ok
Posts: 40,524
Have no idea without some troubleshooting on your part. Is there 12v on the purple wire with the key selected to the start position and is there battery voltage on the big lug at all times? Is the battery fully charged?
Thread
Thread Starter
Forum
Replies
Last Post
