dfire25

Hey guys,
Is anyone running a 200-4R with a hurst his/hers shifter? They sell a retrofit kit for it and I'm wondering if it works. Any problems? Does it function like normal? Please let me know. Thanks

Majic Jack

The his/hers is designed for a three speed tranny and the 200 4R is obviously a four speed, not likely you will succeed with that manuever.

2blu442

Shiftworks has the setup, but Joe P. has commented that the 4th gear is where the neutral location presently is. Attached is a link to the company that sells this, then below that are several old threads discussing this swap.
John


http://shiftworks.com/cutlas70-72.htm





https://classicoldsmobile.com/forums...eed-trans.html

https://classicoldsmobile.com/forums...e-shifter.html

https://classicoldsmobile.com/forums...r4-200-4r.html

https://classicoldsmobile.com/forums...-71-442-a.html

dfire25

Thanks John for the info and the thread links. Great information.

joe_padavano

Hurst USED to make an aftermarket dual gate for the 700R4 and 200-4R in the early 1980s. It's long out of production. Units show up on ebay rarely and sell for stupid money when they do ($600 and up! ). As noted, I've seen the Shiftworks kit installed and I wouldn't get one. All it does is change the lever arm ratios so that you engage fourth when the lever is in the neutral position. P-R-N are all squeezed together in the remaining space.