finally starting on my 68 toro
#1
finally starting on my 68 toro
this all started a couple years ago when i bought a non op toro from paratrooper501 as a frame/ floorpan donor for my first 66 toronado. when i got it (aside from some drunk bodywork), i found it too nice to canibalize. it needed typical quarter patches, fender patches (all had been cut out but new metal wasnt attached properly as it was pop rivited in), and bumpers (front was rusty, rear missing). Shame was that back in 08, it was still a decent looking original car (found the previous owner and talked to him about the car....he was floored it ended up in missouri and regretted selling it to "some redneck flippers down the road" and said "it made him sad to see what they did to it, and that he wondered what happened to it" my mechanic got it running and driving in a couple weeks in his free time (battery, new carb/ fuel line (cracked), and bled the brakes (had new parts all around and new fluid, but wasnt bled down). i then sourced a right front turn signal off ebay to replace the broken one. all that was left was taillights and a rear bumper (how hard could that be....right???)
IMAG0972_zpshdpkv8mt.jpg
IMAG2696_zps39967437.jpg
Fast forward to a few months ago, and i found a guy in illinois over 2 hours away who had bought one as a father son project, bought a 1970 disc brake setup, pulled the engine, and thats as far as he got (dad bought a sweet 68 cutlass and son then wanted a cutlass as well to shove his built 455 into). yesterday i finally got time to pick it up. I paid 1050 for it plus 350 for the tow (not horrible I guess given total seat time was about 6 hours).
IMAG1062_zpsbzdenzii.jpg
IMAG1063_zpsbc0qwzw6.jpg
IMAG1067_zpsfqjv5hp6.jpg
IMAG1068_zpsrthdri7r.jpg
IMAG1069_zpsuqrnfcwu.jpg
IMAG1070_zpsxq94egjv.jpg
IMAG1071_zpsdl1f1p1i.jpg
IMAG0972_zpshdpkv8mt.jpg
IMAG2696_zps39967437.jpg
Fast forward to a few months ago, and i found a guy in illinois over 2 hours away who had bought one as a father son project, bought a 1970 disc brake setup, pulled the engine, and thats as far as he got (dad bought a sweet 68 cutlass and son then wanted a cutlass as well to shove his built 455 into). yesterday i finally got time to pick it up. I paid 1050 for it plus 350 for the tow (not horrible I guess given total seat time was about 6 hours).
IMAG1062_zpsbzdenzii.jpg
IMAG1063_zpsbc0qwzw6.jpg
IMAG1067_zpsfqjv5hp6.jpg
IMAG1068_zpsrthdri7r.jpg
IMAG1069_zpsuqrnfcwu.jpg
IMAG1070_zpsxq94egjv.jpg
IMAG1071_zpsdl1f1p1i.jpg
#3
#4
Was the engine a W-34 to match that rear bumper?
Now I see why you are parting it out. (I commented on FB. It looks like you won't have A pillars for me )
Did you get good tail lights out of the deal?
Now I see why you are parting it out. (I commented on FB. It looks like you won't have A pillars for me )
Did you get good tail lights out of the deal?
#5
AFAIK, that was not a true w34 car. didnt have the CAI provisions that i saw. the P.O. said the motor wasnt correct for a w34, and the trans tag is not correct for a w34 (sadly).
Last edited by cadillac kevin; June 10th, 2015 at 09:09 AM.
#8
IMAG1221_zpsnfbrnoh6.jpg
IMAG1205_zpsn89tdi7y.jpg
IMAG1206_zpslopglgzu.jpg
IMAG1207_zpssskvfyq3.jpg
IMAG1208_zpseszuijqm.jpg
IMAG1209_zpseipqykjk.jpg
IMAG1210_zpsaqdy8vg7.jpg
IMAG1214_zpsx4lu8lgr.jpg
IMAG1211_zpsyfep3dww.jpg
IMAG1212_zpssfodbyfn.jpg
IMAG1213_zpsfzzh99wi.jpg
IMAG1217_zpswu82zxjs.jpg
IMAG1216_zpsdezpgtci.jpg
IMAG1218_zps7r27wofe.jpg
IMAG1205_zpsn89tdi7y.jpg
IMAG1206_zpslopglgzu.jpg
IMAG1207_zpssskvfyq3.jpg
IMAG1208_zpseszuijqm.jpg
IMAG1209_zpseipqykjk.jpg
IMAG1210_zpsaqdy8vg7.jpg
IMAG1214_zpsx4lu8lgr.jpg
IMAG1211_zpsyfep3dww.jpg
IMAG1212_zpssfodbyfn.jpg
IMAG1213_zpsfzzh99wi.jpg
IMAG1217_zpswu82zxjs.jpg
IMAG1216_zpsdezpgtci.jpg
IMAG1218_zps7r27wofe.jpg
#9
That's not bad.
Pan is rusty where mine was; check the front (and rear) air plenum for holes. That and the leaking windshield were the main causes of rust in the front pan in my '66.
In fact, it had a hole over the fusebox..
Gotta love that "whipped cream" bondo treatment!
Pan is rusty where mine was; check the front (and rear) air plenum for holes. That and the leaking windshield were the main causes of rust in the front pan in my '66.
In fact, it had a hole over the fusebox..
Gotta love that "whipped cream" bondo treatment!
#10
the drivers side window is stuck down 3" (windows wont work at all, along with everything in the interior but the dash gauges). and the rear drain hose flanges are gone. and yeah, for a toronado, thats not bad.
Thread
Thread Starter
Forum
Replies
Last Post
Clarksroom
Major Builds & Projects
2
August 1st, 2013 11:37 AM