Anyone knowledgeable using Snap On MT2500 Scanner?

ToronadoGuyDenver · 07-04-2007, 08:31 PM

Is there anyone who knows how to use the Personality Keys using a Snap On MT2500 Scanner? If so, would you please leave a detailed message on how they are used. I know everything else about the scanner, I just don't know how to use the keys.

jeff.auto · 11-18-2007, 09:22 PM

I suppose you got your answer by now since your post was made in january or july (couldn't tell) - anyway, the keys for the mt-2500 scanner are for 1996 and newer vehicles - they fit in the obd II adapter and customize the different manufacturer specific pins in the 17-pin connector to work with the scantool. GM uses the K-9 key, fords use the K-2a and Chrysler uses the K-13 and the K-13a. I hope that helps. The tool will tell you what key to install when you enter the vin for every new vehicle you work on.
Jeff

Oldsguy · 11-20-2007, 07:09 AM

Jeff, welcome to our site. Make a seperate post and introduce yourself to us. Thanks for the good information too.

07-04-2007, 08:31 PM	#1 (permalink)
ToronadoGuyDenver Junior Member Join Date: Jan 2007 Posts: 13	Anyone knowledgeable using Snap On MT2500 Scanner? Is there anyone who knows how to use the Personality Keys using a Snap On MT2500 Scanner? If so, would you please leave a detailed message on how they are used. I know everything else about the scanner, I just don't know how to use the keys.

11-18-2007, 09:22 PM	#2 (permalink)
jeff.auto Junior Member Join Date: Nov 2007 Posts: 1	mt-2500 keys I suppose you got your answer by now since your post was made in january or july (couldn't tell) - anyway, the keys for the mt-2500 scanner are for 1996 and newer vehicles - they fit in the obd II adapter and customize the different manufacturer specific pins in the 17-pin connector to work with the scantool. GM uses the K-9 key, fords use the K-2a and Chrysler uses the K-13 and the K-13a. I hope that helps. The tool will tell you what key to install when you enter the vin for every new vehicle you work on. Jeff

11-20-2007, 07:09 AM	#3 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 3,167	Jeff, welcome to our site. Make a seperate post and introduce yourself to us. Thanks for the good information too. __________________ Dan '77 Cutlass Supreme '46 2 door

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode