What is this thing on a 67 Toro?

Thread Tools
 
Search this Thread
 
Old January 11th, 2017, 10:13 AM
  #1  
SL1
Registered User
Thread Starter
 
SL1's Avatar
 
Join Date: Mar 2016
Location: Virginia
Posts: 22
What is this thing on a 67 Toro?

What is it?
​​​​​​​That canister- looking thing on the driver's fenderwell. All that I know is that it's a California car with cruise control. Please see attached picture. Thanks
SL1 is offline  
Old January 11th, 2017, 03:49 PM
  #2  
Moderator
 
2blu442's Avatar
 
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
I've seen these on 1966's but not 67's. Its part of an early emissions control system required on California sold cars. You should also have a smog pump located below the AC compressor on the passenger side of the engine. There will also be additional vacuum lines/fittings on the engine, and steel lines attached to the heads one fitting going into each cylinder. Since I live right on the Oregon California border I've come across several cars with this setup. John
2blu442 is offline  
Old January 11th, 2017, 05:01 PM
  #3  
SL1
Registered User
Thread Starter
 
SL1's Avatar
 
Join Date: Mar 2016
Location: Virginia
Posts: 22
John- Thanks for the explanation. I wasn't familiar with the California- only emmisions equipment.
Steve
SL1 is offline  
Old January 11th, 2017, 05:17 PM
  #4  
Moderator
 
2blu442's Avatar
 
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Hi Steve
My memory was off just a little bit. I looked at photos on my photbucket site and have picture of both 1966 and 1967 cars with this system on it. John
2blu442 is offline  
Old January 11th, 2017, 05:23 PM
  #5  
SL1
Registered User
Thread Starter
 
SL1's Avatar
 
Join Date: Mar 2016
Location: Virginia
Posts: 22
Thanks John. I was thinking that it looks like it could be a charcoal canister? Maybe it had a replaceable filter under that ribbed top?
SL1 is offline  
Old January 11th, 2017, 05:40 PM
  #6  
SL1
Registered User
Thread Starter
 
SL1's Avatar
 
Join Date: Mar 2016
Location: Virginia
Posts: 22
John- From your explanation above I found a picture of it from Fig. 6EB-11 from my 67 service manual. It's called a "Filter and Silencer Assy". A hose connects to the air pump. I was wrong above thinking it was a charcoal cannister. Thanks again for your help. Mystery solved! Steve
SL1 is offline  
Old January 11th, 2017, 05:50 PM
  #7  
Connoisseur d'Junque
 
MDchanic's Avatar
 
Join Date: Sep 2010
Location: The Hudson Valley
Posts: 21,183
So, basically, an air cleaner for the AIR pump.

If I'm not mistaken, in later years it was replaced by a 1" chunk of felt in a receptacle in the back of the AIR pump.

- Eric
MDchanic is offline  
Old January 12th, 2017, 07:11 AM
  #8  
Old(s) Fart
 
joe_padavano's Avatar
 
Join Date: Mar 2007
Location: Northern VA
Posts: 47,265
Originally Posted by mdchanic
so, basically, an air cleaner for the air pump.
^^^this.
joe_padavano is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
American Lead
Small Blocks
3
April 20th, 2009 12:47 PM
jeffs 89 cutlass salon
Chassis/Body/Frame
4
October 7th, 2007 05:59 PM
American Lead
Other
18
September 18th, 2007 05:18 PM
American Lead
Transmission
2
April 3rd, 2007 03:04 AM
Want-A-Vert
Small Blocks
2
January 15th, 2007 12:02 PM



Quick Reply: What is this thing on a 67 Toro?



All times are GMT -7. The time now is 11:07 PM.