warning

tonycpe · 03-14-2008, 07:24 AM

I just recieved the part I ordered 19 days ago from gmpartsdirect. The part is going into the garbage bin. I learned my lesson.

Oldsguy · 03-14-2008, 08:48 AM

What was the part and how was it defective? Just wondering.

Olds64 · 03-14-2008, 10:25 AM

Yes, please tell us what was wrong with it!

tonycpe · 03-14-2008, 12:42 PM

a front cover with long dents and or creases in it were the water pump seals to it .

Oldsguy · 03-14-2008, 01:07 PM

Well that would suck, was it used or touted as brand new? I have seen lots of them with so much corrosion there was serious doubt whether the water pump would seal or not.

tonycpe · 03-14-2008, 04:13 PM

It's brand new and i just checked to see if it is flat , and found it is .040 con cave across the water pump ports. and the lip on the bottom is lower , not sure how much yet, this will drop the oil pan rubber a little lower , which may or may not hurt depending on how much lower.

Redog · 03-14-2008, 08:05 PM

Send it back

aliensatemybuick · 03-14-2008, 08:20 PM

I ordered an under-seat storage box for a Silverado pickup a few years back...was a good deal, but still a bit pricey, and I disappointed to see that it had been damaged either during shipping or before (seemed to me it was unlikely to have been damaged during shipping because it was so well packed and the outer box looked fine_. After I contacted them with my concern, they sent a nother one no questions asked. Give them a chance to make good.

Oldsguy · 03-15-2008, 08:58 AM

So, what do you plan to do to solve your need of a front cover? Do you have another source? As I doubt you will re-order from gmpartsdirect. Me being the fabricator I tend to be (notice I didn't precede that with the word good?) I would be tempted to try and correct the concavity and lower lip on my own, but probably not a good idea.

J-(Chicago) · 03-15-2008, 09:03 AM

Well, since any Sbo front cover should work, it shouldn't be a problem finding another.

joe_padavano · 03-15-2008, 02:59 PM

Quote:

Originally Posted by J-(Chicago)

Well, since any Sbo front cover should work, it shouldn't be a problem finding another.

Actually, any 64-90 Olds big or small block front cover (except 64 394) will work. As for the one you bought being new, since you got it from gmpartsdirect I suspect it's an N.O.S. part. The last one was stamped by the factory 17 years ago, so this one is at least that old. It's unfortunate that the one you received was damaged, but things do happen. I agree that you should give them a chance to make good.

03-14-2008, 07:24 AM	#1 (permalink)
tonycpe Member Join Date: Jan 2008 Location: Cheboygan, Michigan Posts: 27	warning I just recieved the part I ordered 19 days ago from gmpartsdirect. The part is going into the garbage bin. I learned my lesson. __________________ Old Fogey Racing Ltd.

03-14-2008, 08:48 AM	#2 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 3,145	What was the part and how was it defective? Just wondering. __________________ Dan '77 Cutlass Supreme '46 2 door

03-14-2008, 10:25 AM	#3 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,811	Yes, please tell us what was wrong with it! __________________ "Some men are Baptists, others Catholics. My father was an OLDSMOBILE man." Ralphie Billingsley A Christmas Story 1983 "We rei-eign, supreme, ooooh god! Burrito supreme, and a chicken supreme, and a CUTLASS SUPREME!" Tenacious D 2007

03-14-2008, 12:42 PM	#4 (permalink)
tonycpe Member Join Date: Jan 2008 Location: Cheboygan, Michigan Posts: 27	a front cover with long dents and or creases in it were the water pump seals to it . __________________ Old Fogey Racing Ltd.

03-14-2008, 01:07 PM	#5 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 3,145	Well that would suck, was it used or touted as brand new? I have seen lots of them with so much corrosion there was serious doubt whether the water pump would seal or not. __________________ Dan '77 Cutlass Supreme '46 2 door

03-14-2008, 04:13 PM	#6 (permalink)
tonycpe Member Join Date: Jan 2008 Location: Cheboygan, Michigan Posts: 27	It's brand new and i just checked to see if it is flat , and found it is .040 con cave across the water pump ports. and the lip on the bottom is lower , not sure how much yet, this will drop the oil pan rubber a little lower , which may or may not hurt depending on how much lower. __________________ Old Fogey Racing Ltd.

03-14-2008, 08:05 PM	#7 (permalink)
Redog Alero Chapter Secretary Join Date: Aug 2006 Location: Newtown, PA Posts: 831	Send it back __________________ Me 2000 Alero running 14's 2005 Nissan Altima (her's) 1985 Delta 88 w/1968 350 rocket ( MURDERED )

03-14-2008, 08:20 PM	#8 (permalink)
aliensatemybuick Member Join Date: Jul 2007 Posts: 68	I ordered an under-seat storage box for a Silverado pickup a few years back...was a good deal, but still a bit pricey, and I disappointed to see that it had been damaged either during shipping or before (seemed to me it was unlikely to have been damaged during shipping because it was so well packed and the outer box looked fine_. After I contacted them with my concern, they sent a nother one no questions asked. Give them a chance to make good.

03-15-2008, 08:58 AM	#9 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 3,145	So, what do you plan to do to solve your need of a front cover? Do you have another source? As I doubt you will re-order from gmpartsdirect. Me being the fabricator I tend to be (notice I didn't precede that with the word good?) I would be tempted to try and correct the concavity and lower lip on my own, but probably not a good idea. __________________ Dan '77 Cutlass Supreme '46 2 door

03-15-2008, 09:03 AM	#10 (permalink)
J-(Chicago) Seasoned beater pilot. Join Date: Jan 2007 Location: Chicago Posts: 1,646	Well, since any Sbo front cover should work, it shouldn't be a problem finding another. __________________ I'd rather have a numbers matching poker hand.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode