![]() |
|
|||||||
| Forums | Gallery | Encyclopedia | Tech | Olds Junction | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Sep 2007
Posts: 10
|
rough idle
How should i go about getting my car to idle smooth and not shoot black smoke everywhere?Car starts with pedal all the way down and in park only smoothes out when flooring it.57 super88 v8 4 bbl
|
|
|
|
| Sponsored Links |
|
|
|
|
#2 (permalink) |
|
Senior Member
Join Date: Aug 2004
Posts: 85
|
If the exhaust is spewing black smoke, the engine is running way too rich. Your choke may be stuck or misadjusted, and flooring the accelerator is the only way to get the choke plate to open. The carburetor may also be flooding, due to the float valve leaking or misadjusted. For further advice, we need more information on when the problem started, and what you've done so far to find the cause. In general, problems at idle are fuel related and not ignition related. The carburetor may need adjustment of the idle jets, or cleaning and rebuilding. There may be a vacuum leak at the base of the carburetor, or somewhere else on the intake manifold. The distributor vacuum advance may not be working properly, perhaps due to a leaking vacuum line, or the ignition timing may otherwise be incorrect. Leaking valves ( intake or exhaust) can prevent an engine from idling smoothly, although your problem sounds like carburetion.
__________________
Love those Starfires Last edited by PetChemMan : 11-15-2007 at 06:54 PM. |
|
|
|
|
|
#3 (permalink) |
|
69 Member
Join Date: Jun 2007
Location: Dayton,Texas
Posts: 38
|
I just had my carb rebuilt for the exact same reason.
__________________
1969 Cutlass S Holiday Coupe 1973 Ford Gran Torino 1982 Camaro Z-28 1994 Ford Lightning 1995 F-150 Supercab 2003 F-150 Supercrew One for every Decade of my Life!
|
|
|
|
|
|
#4 (permalink) |
|
Member
Join Date: May 2008
Posts: 46
|
how much would a rebuild on 4bbl quadra jet cost?
|
|
|
|
|
|
#5 (permalink) |
|
Member
Join Date: Apr 2008
Location: Lafayette NJ
Posts: 35
|
There is a guy that rebuilt my Rochester 4bbl for around $200. Some idiot epoxyed my carb together, so he had to get me another core. He charged $75.I had a rough idle due to the throttle bushings and leak down issues after when hot.
Mountain Man fuel systems in AK:He did eveything including re-bushing the throttle shafts and epoxying the float bowl well plugs. Carb came back to me looking brand new, and worked great! Seeing how a rebuild kit was 50-75 bucks, I thought it was worth it. ADDRESS IS: MOUNTAIN MAN FUEL SYSTEMS c/o TED LOWE 9401 SUGARLOAF MTN. RD. HACKETT AR 72937 479-639-2022 Last edited by 68ragtop : 06-03-2008 at 04:37 AM. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| voltage and idle drop / surge | BrianArmand | Electrical | 4 | 11-20-2007 06:51 AM |
| Idling rough? | novice57 | Eighty-Eight | 2 | 10-30-2007 05:23 AM |
| Need advice. My 72 olds is running rough. | tex70 | Cutlass | 18 | 06-20-2007 05:07 AM |
| '84 cutlass 307 w/high idle | 87CUTTY | Small Blocks | 4 | 05-31-2007 02:33 PM |
| 85 with idle prob and burns gas bad | berto | Cutlass | 0 | 08-04-2006 10:46 PM |