carb ?'s

novice57 · 09-07-2007, 09:08 PM

My freshly rebuilt 4barrel roch. is still giving me problems,not sure if it's a vacuum leak or carb just not getting enough fuel.If i pour gas directly into fuel bowl or down barrels it will start and rev really high.Other than that she won't start.where should i start to look first?novice

Olds64 · 09-08-2007, 07:25 AM

If the carb is the only thing you have changed then make sure your idle mixture screws are backed out 2.5 turns to start out with. That is a good starting point for Quadrajets. You also need to set the choke with the car cold. Make sure the carb is tight against the manifold, and double check your vacuum ports and make sure if there are any you aren't using they are plugged. Hopefully that will get the car started and you can tune it from there. Good luck.

09-07-2007, 09:08 PM	#1 (permalink)
novice57 Junior Member Join Date: Sep 2007 Posts: 10	carb ?'s My freshly rebuilt 4barrel roch. is still giving me problems,not sure if it's a vacuum leak or carb just not getting enough fuel.If i pour gas directly into fuel bowl or down barrels it will start and rev really high.Other than that she won't start.where should i start to look first?novice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best carb?????	troys2222	Small Blocks	0	04-18-2007 02:29 PM
Carb Question?	punishercarr	Big Blocks	4	04-16-2007 06:28 AM
Carb questions	keith6989	Small Blocks	6	03-11-2007 06:32 PM
Carb suggestions	66starfire	Big Blocks	8	12-27-2006 09:10 AM
w32 carb	Chuck C	Big Blocks	5	04-11-2005 10:48 AM

09-08-2007, 07:25 AM	#2 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,811	If the carb is the only thing you have changed then make sure your idle mixture screws are backed out 2.5 turns to start out with. That is a good starting point for Quadrajets. You also need to set the choke with the car cold. Make sure the carb is tight against the manifold, and double check your vacuum ports and make sure if there are any you aren't using they are plugged. Hopefully that will get the car started and you can tune it from there. Good luck.