More from my 350

January 10th, 2005, 09:42 AM

I thought I wanted to drop a 455 in my 72 Cutlass conv, but I see I will have to change a lot more than just the motor. So I have decided to beef up the numbers matching 350 motor I have. Any suggestion on what I should do to get more from this engine. I have a 350 TH trans that is already in the car with a shift kit installed, a 4 barrel carb, dual exhaust with 2 1/2" pipe and dynomax mufflers and a HEI distributor and H.O. coil. This is not enough. PLS help.

chris72 · February 3rd, 2005, 11:55 AM

ive got a 72 cutlass supreme and i put a "p.a.w" house cam an edelbrock intake holley 4 barrel carb and im looking for a set of headers but that proves impossible well put together the combo ive got and see how u like it

mike88 · February 20th, 2005, 09:56 PM

Chris, no matter what the books say, headers for your 72 supreme are the same as the headers for a cutlass or a 442 w/ the 350, chassis are all the same. Don, you have done just about everything that you can do externally,now it's time to add a good street cam and rearend gear change to add the oomph that you're looking for.

[ February 20, 2005: Message edited by: mike88 ]

[ February 21, 2005: Message edited by: mike88 ]</p>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 10th, 2005, 09:42 AM	#1 (permalink)
<Don P.> Guest Posts: n/a	I thought I wanted to drop a 455 in my 72 Cutlass conv, but I see I will have to change a lot more than just the motor. So I have decided to beef up the numbers matching 350 motor I have. Any suggestion on what I should do to get more from this engine. I have a 350 TH trans that is already in the car with a shift kit installed, a 4 barrel carb, dual exhaust with 2 1/2" pipe and dynomax mufflers and a HEI distributor and H.O. coil. This is not enough. PLS help.

February 3rd, 2005, 11:55 AM	#2 (permalink)
chris72 Junior Member Join Date: Feb 2005 Posts: 1	ive got a 72 cutlass supreme and i put a "p.a.w" house cam an edelbrock intake holley 4 barrel carb and im looking for a set of headers but that proves impossible well put together the combo ive got and see how u like it

February 20th, 2005, 09:56 PM	#3 (permalink)
mike88 Junior Member Join Date: Aug 2004 Location: illinois Posts: 7	Chris, no matter what the books say, headers for your 72 supreme are the same as the headers for a cutlass or a 442 w/ the 350, chassis are all the same. Don, you have done just about everything that you can do externally,now it's time to add a good street cam and rearend gear change to add the oomph that you're looking for. [ February 20, 2005: Message edited by: mike88 ] [ February 21, 2005: Message edited by: mike88 ]</p>