Pro comp heads on a race engine
December 1st, 2015, 11:51 AM
#121
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 3,574
I think Rad made the point, these heads have become popular recently and most builds are still in progress. It does not seem like many guys are using them in their race cars, which is even more reason to allow dyno results. To this point you still have not given a good reason to exclude them. You started this thread knowing there will be few, if any, posts from guys racing them. Even in your other "race engine" thread, there are some VERY impressive combos, but most you pulled from ROP and are guys who never post here.
December 1st, 2015, 11:54 AM
#122
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 3,574
December 1st, 2015, 11:57 AM
#123
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 3,574
I am not disputing your claim that you gained the .6, I am just saying that there are MANY variables. The cam you have may have taken advantage of the better scavenging, the CR may have changed a tad, track conditions were different, etc. BTW, not sure why you even brought this up in your own thread about the Pro-Comps.
December 1st, 2015, 12:03 PM
#124
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 3,574
You are right Jim i did start this thread.I did try and get you to understand the title and my first post on several post after that first one. My contention is and point of view was is you have a agenda!! I have pointed it out for all to see. This isn't a discussion this is your way to derail a thread and insult me.
December 1st, 2015, 01:20 PM
#129
Registered User
Join Date: Jan 2014
Location: Barre,VT
Posts: 621
December 1st, 2015, 02:17 PM
#131
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 3,574
I understand you are very persistent on trying to evoke more arguments. This my thread why don't you just stop because you have not validated everything. As a matter of fact you ignored this topic from the get go and that has been validated. You do have a agenda that has been validated. So what is your point is continuing in your self-righteous antics.
December 1st, 2015, 02:25 PM
#133
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 3,574
Thread
Thread Starter
Forum
Replies
Last Post
rcdynamic88
Small Blocks
9
October 20th, 2014 11:28 AM
