Back together, new PB
#1
Back together, new PB
After breaking a rod bolt 22 months ago, I finally got the car back together, and made my quickest run yet, a 10.39 @ 125 with a 1.36 60'.
http://davemilcarek.com/041616a/page...20R1%20450.htm
http://davemilcarek.com/041616a/page...20R1%20450.htm
#6
I'm sure it's in here somewhere, but I'll post it.
It's a 455 block, .030 over, Smitty's bed plate, Eagle 4.500 crank, Molnar Technologies 7.100 rods, Ractec flat top pistons, 12:1 cr, unported Edelbrock heads, 242/246 .590/.585 hydraulic roller cam with solid roller lifters, Offy Port-O-Sonic intake, Holley Pro-Jection, Hedman 1-3/4 headers, TH400, 4600 stall, 3.90 gear, 30x9 radials, 3450 lbs., shift at 5400, and go through at 6000.
It's a 455 block, .030 over, Smitty's bed plate, Eagle 4.500 crank, Molnar Technologies 7.100 rods, Ractec flat top pistons, 12:1 cr, unported Edelbrock heads, 242/246 .590/.585 hydraulic roller cam with solid roller lifters, Offy Port-O-Sonic intake, Holley Pro-Jection, Hedman 1-3/4 headers, TH400, 4600 stall, 3.90 gear, 30x9 radials, 3450 lbs., shift at 5400, and go through at 6000.
Thread
Thread Starter
Forum
Replies
Last Post
gearheads78
Major Builds & Projects
431
April 1st, 2024 09:24 PM
1BAD68"S"
Chassis/Body/Frame
4
November 30th, 2006 07:21 PM