1972 cutlass
#1
1972 cutlass
Hello, just bought a 1972 cutlass 2-door hardtop project car with no interior, Looking for alot of parts, from rear quarter panels (both sides), front fenders, trunk lid, and doors or skins. Let me know what you have
John
John
Last edited by johner37; August 17th, 2012 at 05:53 AM.
#3
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Hi johner37 and welcome to C.O.
Yup, it would help to know which model as the different trim levels also had different interior patterns.
Suggestion on the parts wanted: We have a section under the Oldsmobile Classified section for posting Parts wanted. Make a complete list and post there. Likely you'll get better results from some of the folks who surf through the forums section instead of checking the new posts.
Also, please post pics of your project car.
When you start into tearing it down and rebuild? Start a thread under the "major builds' section for us to follow along.
One of the most important features of any work you'll do is documenting what was 'before', what happened 'during', and how it turned out 'after'. This is best done with a camera. Take lots of pics. They can also help you with any problems you might run into during reassembly.
Yup, it would help to know which model as the different trim levels also had different interior patterns.
Suggestion on the parts wanted: We have a section under the Oldsmobile Classified section for posting Parts wanted. Make a complete list and post there. Likely you'll get better results from some of the folks who surf through the forums section instead of checking the new posts.
Also, please post pics of your project car.
When you start into tearing it down and rebuild? Start a thread under the "major builds' section for us to follow along.
One of the most important features of any work you'll do is documenting what was 'before', what happened 'during', and how it turned out 'after'. This is best done with a camera. Take lots of pics. They can also help you with any problems you might run into during reassembly.
#5
I apologize for that guys, I have a 72 cutlass supreme, the more square body style, the rear quarters on my car don't have the lip that contours the wheel well, it is actually higher up on the panel. Hope this was helpful, I have pics in my phone, but I'm not really sure how to post them on here. I have located some fenders locally, and I am really in need of some rear quarter panel skins but I will take a look at any parts that may be available.
@ Alan R, my car is the opposite body style from the one in your signature.
Thanks
@ Alan R, my car is the opposite body style from the one in your signature.
Thanks
Last edited by johner37; August 29th, 2012 at 07:04 AM.
#7
I am working in Memphis, Tn, but I live in Vicksburg, MS, so which ever location would be cheaper to ship to. The Memphis location is a business address so I'm sure that would be the cheapest shipping route, becuase I can recieve in as frieght if needed.
#8
Here's what I have if you're interested:
http://detroit.craigslist.org/okl/cto/3234007685.html
Obviously I'm a quite a ways away from Vicksburg and Memphis but figured I'd at least send the info to you....
http://detroit.craigslist.org/okl/cto/3234007685.html
Obviously I'm a quite a ways away from Vicksburg and Memphis but figured I'd at least send the info to you....
#9
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Actually you're fairly close to Scott and Eric
Scott - Oldspackrat - Indianapolis Indiana
Eric - jensenracing77 - Brazil Indiana
Either of them could prolly hook you up with the panels and some of the interior you're missing. For complete trim panels/carpet/headliner you can always get new from great aftermarket shops like "Legendary" Interiors or PUI.
Does your car have floor shift/console or is it column shift?
Scott - Oldspackrat - Indianapolis Indiana
Eric - jensenracing77 - Brazil Indiana
Either of them could prolly hook you up with the panels and some of the interior you're missing. For complete trim panels/carpet/headliner you can always get new from great aftermarket shops like "Legendary" Interiors or PUI.
Does your car have floor shift/console or is it column shift?
#10
I have a very solid passenger door for sale, located in St. Louis, MO. I would like to get $125 for it. I also have a pair of the stainless rocker panel trim and the 5 piece trunk lid/quarter panel extension trim for a Supreme if you need those too. Let me know if you are interested.
#11
Actually you're fairly close to Scott and Eric
Scott - Oldspackrat - Indianapolis Indiana
Eric - jensenracing77 - Brazil Indiana
Either of them could prolly hook you up with the panels and some of the interior you're missing. For complete trim panels/carpet/headliner you can always get new from great aftermarket shops like "Legendary" Interiors or PUI.
Does your car have floor shift/console or is it column shift?
Scott - Oldspackrat - Indianapolis Indiana
Eric - jensenracing77 - Brazil Indiana
Either of them could prolly hook you up with the panels and some of the interior you're missing. For complete trim panels/carpet/headliner you can always get new from great aftermarket shops like "Legendary" Interiors or PUI.
Does your car have floor shift/console or is it column shift?
Thread
Thread Starter
Forum
Replies
Last Post
Gotvette?
Cars For Sale
0
January 9th, 2015 06:42 PM
rallye350
Cars For Sale
0
December 23rd, 2009 08:11 PM
egknz
Parts For Sale
4
October 26th, 2009 06:06 PM