Need 455 Heads

stormsgrizzly · 11-29-2006, 07:38 PM

can any body turn me on to a set of heads for a 71 455? I recently bought a 442 with 455 in it but the heads were the j variety and I want need a set that will allow the car to breath

2blu442 · 11-30-2006, 07:09 PM

I've got lots of heads in Oregon. What part of the country are you located in? If your not near the West Coast try posting an ad on realoldspower.com for additional coverage. John

stormsgrizzly · 11-30-2006, 07:59 PM

I'm located in up state NY,thanks for the tip,you wouldn't have a set of E,F,G,H stamped heads kicking around would you?

2blu442 · 11-30-2006, 08:03 PM

I've got C, E, G, Ga heads that are available. If you can't find something closer get back to me and we can check the shipping. I'm afraid it would be pretty expensive. Also, 442.com is another Olds web site that has free parts wanted ads. John

stormsgrizzly · 11-30-2006, 08:08 PM

John ,thanks a ton I will get back to you if I have no luck closer to home ,again thank you!

Eightupman · 12-01-2006, 04:25 PM

Where in Upstate are you located. I will be headed home to the Albany area around the holidays and I can bring a pair of "C" heads with me. They are not correct for that car, but have been told they are one of the better ones for Hi perf application.

PM me if interested.

John

mjscutlass · 12-02-2006, 08:36 PM

I have a freind in cleveland OH his number is 440 886 3821 his name is art and he works after 3. Tell him mike sent u.

Ranzan · 12-03-2006, 09:16 AM

hey Blu how much are you asking for the heads? C`s I`m heading down to Seattle on the 15 of Dec will be there till Sunday

2blu442 · 12-03-2006, 01:06 PM

Depends, if you want the factory 2.00 valve heads that would be $125 a set complete. Factory big valve, 2.07 would be $200 complete, plus shipping on both. If your going to rework them the small valve would save you a few dollars as you could cut it out for 2.07's. If you wanted just bare heads take $25 off the price and I'll strip them down. This would include a visual check for cracks, if you wanted them magged before shipping I can do that if you'd re-emburse the costs. Seattle is still a ways off, but I could ship them to the address you'll be at. The price of gas you probably wouldn't want to drive this far, but I also have complete engines, 330,350,403,425 and 455's. I'll admit, I've been collecting more than putting together for the last decade and it's time to move some parts and project cars to focus on the ones I really want to rebuild. Let me know if you'd like to see photos of anything. John

drolds2u · 12-03-2006, 05:56 PM

i have a set of "C" heads...$400 shipped to you

orange442 · 12-05-2006, 01:49 PM

"G" heads with the 409100 casting number would be the correct heads for a 71 442(non W-30). If you are going to change your heads out, I would suggest trying to find the correct castings for your car because it looks like it has not been messed with when someone looks at it to buy or check its' originality, again, just a suggestion.

ROCKETQUEEN-ONE · 07-12-2007, 06:18 AM

I HAVE FOR SALE:

1965 OLDS 425 # 396525A WITH 7" RODS AND STEEL CRANK STILL IN IT. IT WILL NEED REBUILT

73 F3 BLOCK WITH A 68 ON TOP OF IT IN WHICH I AM NOT SURE WHAT YEAR THAT MAKES IT

A F6 BORED OUT '30 OVER. THE OLDS FAQ SAYS ITS A '67 NON TORONADO MOTOR BUT I ALWAYS THOUGHT IT WAS A 455 FOR I HAD THIS MOTOR SINCE '87 AND IT WAS A SUPER BAD ASS MOTOR

A SET OF "C" HEADS WITH 500 MILES ON THEM
A SET OF 'E' HEADS THAT PROBABLY COULD USE A REBUILD
1 425 'A' HEAD

I HAVE A 455 CRANK GROUND DOWN .10
2 SETS OF 455 RODS
NUMEROUS OTHER 455 PARTS

DROP ME A LINE AT thesroke@msn.com or rocketqueen-one@hotmail.com IF YOU ARE INTERESTED. THEY ARE LOCATED CLOSE TO DUBOIS,PA 15801
THANKS MATT

12-01-2006, 04:25 PM	#6 (permalink)
Eightupman Senior Member Join Date: Nov 2006 Location: Fayetteville, NC Posts: 252	Heads Where in Upstate are you located. I will be headed home to the Albany area around the holidays and I can bring a pair of "C" heads with me. They are not correct for that car, but have been told they are one of the better ones for Hi perf application. PM me if interested. John

12-02-2006, 08:36 PM	#7 (permalink)
mjscutlass Member Join Date: Nov 2006 Location: akron OH. Posts: 70	i have a freind I have a freind in cleveland OH his number is 440 886 3821 his name is art and he works after 3. Tell him mike sent u.

12-03-2006, 09:16 AM	#8 (permalink)
Ranzan Parksville B.C. Canada Join Date: Jul 2006 Posts: 107	hey Blu how much are you asking for the heads? C`s I`m heading down to Seattle on the 15 of Dec will be there till Sunday __________________ Wes 67 C/S Sports Coupe 67 Cutlass Holiday Coupe

12-03-2006, 01:06 PM	#9 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 806	Heads Depends, if you want the factory 2.00 valve heads that would be $125 a set complete. Factory big valve, 2.07 would be $200 complete, plus shipping on both. If your going to rework them the small valve would save you a few dollars as you could cut it out for 2.07's. If you wanted just bare heads take $25 off the price and I'll strip them down. This would include a visual check for cracks, if you wanted them magged before shipping I can do that if you'd re-emburse the costs. Seattle is still a ways off, but I could ship them to the address you'll be at. The price of gas you probably wouldn't want to drive this far, but I also have complete engines, 330,350,403,425 and 455's. I'll admit, I've been collecting more than putting together for the last decade and it's time to move some parts and project cars to focus on the ones I really want to rebuild. Let me know if you'd like to see photos of anything. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

12-03-2006, 05:56 PM	#10 (permalink)
drolds2u Junior Member Join Date: Oct 2006 Location: Fort Lauderdale FL Posts: 6	heads i have a set of "C" heads...$400 shipped to you

11-29-2006, 07:38 PM	#1 (permalink)
stormsgrizzly Junior Member Join Date: Nov 2006 Posts: 3	can any body turn me on to a set of heads for a 71 455? I recently bought a 442 with 455 in it but the heads were the j variety and I want need a set that will allow the car to breath

11-30-2006, 07:09 PM	#2 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 806	I've got lots of heads in Oregon. What part of the country are you located in? If your not near the West Coast try posting an ad on realoldspower.com for additional coverage. John

11-30-2006, 07:59 PM	#3 (permalink)
stormsgrizzly Junior Member Join Date: Nov 2006 Posts: 3	I'm located in up state NY,thanks for the tip,you wouldn't have a set of E,F,G,H stamped heads kicking around would you?

11-30-2006, 08:03 PM	#4 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 806	I've got C, E, G, Ga heads that are available. If you can't find something closer get back to me and we can check the shipping. I'm afraid it would be pretty expensive. Also, 442.com is another Olds web site that has free parts wanted ads. John

11-30-2006, 08:08 PM	#5 (permalink)
stormsgrizzly Junior Member Join Date: Nov 2006 Posts: 3	John ,thanks a ton I will get back to you if I have no luck closer to home ,again thank you!

12-05-2006, 01:49 PM	#11 (permalink)
orange442 Member Join Date: May 2006 Location: Bartlesville, Oklahoma Posts: 94	"G" heads with the 409100 casting number would be the correct heads for a 71 442(non W-30). If you are going to change your heads out, I would suggest trying to find the correct castings for your car because it looks like it has not been messed with when someone looks at it to buy or check its' originality, again, just a suggestion.

07-12-2007, 06:18 AM	#12 (permalink)
ROCKETQUEEN-ONE Junior Member Join Date: Jul 2007 Posts: 11	I HAVE FOR SALE: 1965 OLDS 425 # 396525A WITH 7" RODS AND STEEL CRANK STILL IN IT. IT WILL NEED REBUILT 73 F3 BLOCK WITH A 68 ON TOP OF IT IN WHICH I AM NOT SURE WHAT YEAR THAT MAKES IT A F6 BORED OUT '30 OVER. THE OLDS FAQ SAYS ITS A '67 NON TORONADO MOTOR BUT I ALWAYS THOUGHT IT WAS A 455 FOR I HAD THIS MOTOR SINCE '87 AND IT WAS A SUPER BAD ASS MOTOR A SET OF "C" HEADS WITH 500 MILES ON THEM A SET OF 'E' HEADS THAT PROBABLY COULD USE A REBUILD 1 425 'A' HEAD I HAVE A 455 CRANK GROUND DOWN .10 2 SETS OF 455 RODS NUMEROUS OTHER 455 PARTS DROP ME A LINE AT thesroke@msn.com or rocketqueen-one@hotmail.com IF YOU ARE INTERESTED. THEY ARE LOCATED CLOSE TO DUBOIS,PA 15801 THANKS MATT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode