Hessbros2015

We are located in Corning Ca, but will ship anywhere in the world, Send me a list of what you need and I will get pictures, prices and description for you, or you can call us at 530-824-4100, ask for Chuck or Jess..

1PDQ55

Hi, I was wondering if it still has the 394 in it, and if so did it by chance have AC? I am looking for the crankshaft pulley and the AC pulley that locks into it. I had the crankshaft bolt backout and stripped the outer AC pulley keyway.

dynamic63

hi how much would you want for the left rear underseat section of floor with the body mount? and the filler panels for the rad support? thanks allan

Hessbros2015

Crank Pulley with AC pulley $125 Plus Shipping.. We do not guarantee the rubber in crank pulley as they are usually no good..

Hessbros2015

Floor under seat is $200 Pending how much of it you want cut.. Radiator Support complete is $200.. Plus shipping costs.. Call us at 530-824-4100

Tedd Thompson

I go through Corning about once a month (sometimes more) if you needs some one to put eyes on a part I would be glad to stop by and give a evaluation.... Tedd

Hessbros2015

Thank you Tedd, you can stop by anytime we are open Mon-Fri 9-4 Sat 9-1 Located at 5550 Grange Rd Corning Ca 96021.. Come check out our other vehicles, we have quite a few..

dynamic63

can you get pics of floor and the support thanks

1PDQ55

Thanks Guys, I am heading to the Hot Rod Reunion in the morning, but hope to get to work on it Sunday morning, I need to get them off and see if they are truly boogered up beyond repair or if I am just missing something. I'll check back with you guys. Thank you so much.

dynamic63

hi I am also interested in the fender script and rocket emblem on trunk lid. thanks allan

Hessbros2015

Hi Allen, The radiator support is beautiful, no rust penetration anywhere.. We do not have the rear seats pulled in any of our 63 4drs, and its a lot of work, if you want it though I will guarantee its rust free and send pictures before we ship, we have 3 or 4 of these cars so we definitely have a nice one.. I will check the fender scripts and rocket emblem on the trunk shortly and get back to you.
Jess

Hessbros2015

Hi Allen, We have both Dynamic 88 Fender Scripts $35 Each and the rocket emblem $65.. We can probably ship your entire order together for $125 Greyhound as long as it doesnt weigh over 100lbs.. Let me know if there is anything else you need..
Thank you
Jess

dynamic63

hi for the rocket on tail I ment the one on the right corner of trunk lid, and how much for rims. I will get pics asap for how much floor I need just need to build an arc to get to garage lol. thanks allan

Hessbros2015

Ok Allen, I am looking for the rocket moulding I dont remember seeing any of these out there but i will give it hell.. As for your arc good luck lol...

Hessbros2015

We have one rocket emblem, good condition, $50.. Which rims are you referring to stock for this car?

dynamic63

Hi I hope the pictures work, I was looking for stock wheels,and if you could let me know if you could get me the dog leg of the quarter as u will c in the pic my rocker and dog leg is rotten. need both doglegs just left rocker section as with the floor piece I also need inner rocker where the bodymount attached. thanks Allan

Hessbros2015

Hi Allen, Just wanted to let you know we are currently downsizing and I could potentially sell you a pretty much complete parts car for $1000.. will check on these other items shortly. General shipping quotes we have recieved in the past for a car is average $1000-$1400..

Charlie Jones

Do any of your '63 s have a good battery tray ? How much?

1PDQ55

Just wanted to take a minute to say thanks to Hess Bros!! I got the part I needed on Friday and though it was slightly different than the one I had, Chuck checked it for me was sure it would work - and it did! Thank you Hess Bros. - you guys got my daily driver back on the road!

rr480

Do you have a good 63 olds rear bumper?
Thanks

eddieunderground

Hey there, how much you asking for the transmission? And how good of shape is it in?

peteyb

I could use the horns if you have any way to determine that they're good. Let me know.

rr480

Do you have a decent bumper?
Thanks Ronnie

canzoman

Do you have the interior rear light covers that go on the left and right side? Should be a white plastic.

Hessbros2015

We are in the process of moving a 7 acre wrecking yard and have been a little behind lately on checking our posts.. If you need parts the best way to reach us a phone call we are open Mon-Fri 9-4 Sat 9-1.. Or email at hessbros2015@gmail.com.. Thank you for your patience and sorry for the inconvenience..
Jess

Carol Thompson

I am looking for a rear deck for 1963 Oldsmobile Dynamic 88 email is ctoads63@gmail.com

DynamicIdiot

Hello, Are you still parting out this car? I'm interested in the timing chain cover and possibly the water pump, if it has the aluminum timing cover. Please let me know. Best, Jason