2blu442

Hi All
I've pulled the rolling chassis out from under it and have a commitment from a member here for the end of this month. If he doesn't purchase it then I'll update this thread with that information. The floorboards are rotten and the trunk floor is mostly gone. The drivers side quarter panel has bad rot in the bottom, the passengerside has bubble in the paint where its starting to come through. There's also dents in all the sheetmetal. The upper areas of the quarter panels and around the back seat is solid. The panel over the rear axle looks good. The convertible top frame is good. Back seat bottom is badly rusted, but the seat back could be saved and rebuilt. I've not removed the bucket seats yet, but suspect they too have bad seat bottoms. I've got the complete 1964 330 & 2 speed transmission that came out of it. I'm keeping the power windows for another project car.

I haven't started cutting up the main body yet, but am thinking of the following prices:

Top frame $500
Pass 1/4 panel $400
Drivers 1/4 panel $200
Tail between 1/4's $75


I'll try to update this with pictures this afternoon, but here's a link to the thread when I got it. There's several photos of the complete car there.

https://classicoldsmobile.com/forums...arts-cars.html

John

rpinnt

I am looking for a bunch of stuff: a rebuildable bucket seat or two, hood letters, front door armrests (base and pad) and possibly a steering wheel if you have anything like that available.

2blu442

I'll look to see what I have on your parts wanted list.

John

2blu442

ttt

drptop70ss

2blu442

I know I've got a couple column shift columns, but it may be the weekend before I have time to look them over and photograph the best one for you. Thanks for sending your zip code, I'll come up with a total cost including shipping when I send you photos. John

lass4ken

Any trim pieces? Need rocker panel moldings with extensions and right wheel well trim. Thanks!

kpl70sx

I'm looking for an automatic floor shifter for a 64 Cutlass. Only need the shifter, not the console or wiring or anything else.

Also looking for these parts for the same car:

- all 4 wheel well moldings
- rocker trim moldings, both sides
- right side turn signal lens (in front bumper)

Please let me know if you have any of these parts.
thanks, Kevin

(car is in Denver, Co.)

2blu442

Here's the column in the 1964. It would likely be next weekend before I could finish pulling it and boxing it up for shipping costs. If your still needing one send me a reminder on Saturday. John

2blu442

I've got a couple other 1964 project cars. I need to make sure I don't need the trim for them. Due to my work schedule it will likely be Saturday before I can check this out. Please send me a reminder Saturday morning.

John

2blu442

I've got some shifters that have broken ears where the T handle fits. If your open to dealing with that I can send you pictures of what I've got this weekend. The wheelwell and rocker moldings are really hard to find. There's one person in front of you, so if I decide I have extra pieces I'll give you second chance at them. I've got some other 1964 project cars and am looking for a pair of good turn signal lenses myself! So sorry, I can't help you on that item. John

drptop70ss

Thanks, I ended up finding a column that will work so I am good to go.

lass4ken

PM'd

Bfg

Is the brake warning light still available?

1964Cutlass

PM sent.

wmorriso

how much for the clock? BM

brick

john the heater I need is a non a/c unit so can you let me know how much and method of payment that works for you thanks dave

Sean Sullivan

Looking for a front bumper with turn signals for the 1964 cutlass

2blu442

Dave, if I have next weekend off work I'll get some pictures for you.

Sean, I may have a core bumper that needs straightened but I'm short on a good set of blinkers myself.

John

wmorriso

Is the clock still available? Doesn't need to work, looking for a clock to retrofit with quartz movement. Please let me know - email: bill1785@gmail.com OR phone or text: 530-519-3593, thanks!

jag1886

I also would be interested in a clock for my 65 John. What is the little red light on the dash for?

Kevin45

I'd be interested in the ignition switch along with the key. Also the side panels on each side of the back seat if they are solid. I'd be interested in both. I need them for a 'vert.

2blu442

Sorry guys, work was crazy again. But I expect to have the weekend off. I'll let you guys know whats available on Sat or Sun.

Jeff, the little red light was for the emergency brake and not all cars came with it.


John

2blu442

Hi Dave
I've got pictures of the two boxes, under dash and under hood. Did you also need the control panel, or just the boxes? Here's a link to the photos:

http://s90.photobucket.com/user/2blu...?sort=3&page=1



John

2blu442

Hi Kevin
I haven't got the dash pulled yet. The back seat side panels are badly rusted at the bottom. Surprised me, as they looked solid until I pulled the seat bottom.


John

brick

john sorry I did not get back to you till now I still need the full heater asy. I seen the pics. how much to ship to ohio