1969 Cutlass S parts car, nice trim, red interior, dash pad, pass. door, more.
#1
1969 Cutlass S parts car, nice trim, red interior, dash pad, pass. door, more.
Just dragged this home. It sat in a barn for about 10 years. Still has lots of trim pieces, glass, some red interior pieces, trunk weatherstrip channel looks nice, pass. door is dented, but not rusty! Driver door is not rusty either, but may be dented to much. Engine is a 305 chevy, rear end is not a posi.
I got one guy coming tomorrow & he has first dibs, but otherwise let me know what you need. Calls are preferred but pms will be answered to.
The car is in Indianapolis & I can ship about anywhere.
Thanks.
Scott
c. 317-727-7041
I got one guy coming tomorrow & he has first dibs, but otherwise let me know what you need. Calls are preferred but pms will be answered to.
The car is in Indianapolis & I can ship about anywhere.
Thanks.
Scott
c. 317-727-7041
#9
Ctosi,
I got the dash pad out today, that was not easy! It appears to be dirty & a bit faded, but I did not see any cracks or damage at all. Ran out of time to get pix, but maybe tomorrow.
Chris,
Thanks for the clarification on the dash.
Pogo,
No idea yet, will try in the next few days & report back.
Montvale,
You are officially 2nd in line.
Tom,
Seat tracks look pretty nice. One head rest is bad, sides are faded, but don't appear to be chalky, I'll inspect them closer in a day or two to be sure. Backs are junk. Seat springs all appear to be pretty nice also. Probably needs foams & covers for sure. Would like to get $225.00 for the seats plus shipping which might be about $60.00-$80.00 per seat maybe?? I have not shipped buckets in a year or so & prices seem to go up all the time.
Olds442,
How about $15.00 shipped?
I got the dash pad out today, that was not easy! It appears to be dirty & a bit faded, but I did not see any cracks or damage at all. Ran out of time to get pix, but maybe tomorrow.
Chris,
Thanks for the clarification on the dash.
Pogo,
No idea yet, will try in the next few days & report back.
Montvale,
You are officially 2nd in line.
Tom,
Seat tracks look pretty nice. One head rest is bad, sides are faded, but don't appear to be chalky, I'll inspect them closer in a day or two to be sure. Backs are junk. Seat springs all appear to be pretty nice also. Probably needs foams & covers for sure. Would like to get $225.00 for the seats plus shipping which might be about $60.00-$80.00 per seat maybe?? I have not shipped buckets in a year or so & prices seem to go up all the time.
Olds442,
How about $15.00 shipped?
Last edited by oldspackrat; February 1st, 2014 at 05:40 PM.
#10
Pix of the dash pad. One dimple in the center vent area, it would be on the underside of the opening when installed.
One of the corners of the vent made a very small crack in the opening. Dash is faded/dirty, but otherwise very nice.
Carlos, you have first shot.
Lower dash is nice except for one easily repairable crack right above the ashtray.
Heat faceplate appears nice, levers move like they should & switch clicks nicely in all positions, needs repainting, but no pitting or damage. $25.00 plus shipping.
ResizedImage_1391312734155_zpse916700e.jpg
One of the corners of the vent made a very small crack in the opening. Dash is faded/dirty, but otherwise very nice.
Carlos, you have first shot.
Lower dash is nice except for one easily repairable crack right above the ashtray.
Heat faceplate appears nice, levers move like they should & switch clicks nicely in all positions, needs repainting, but no pitting or damage. $25.00 plus shipping.
ResizedImage_1391312734155_zpse916700e.jpg
#11
More parts pulled from this car. Wiper switch, $15.00 shipped, lighter $15.00 shipped, headlight switch $20.00 shipped, glove box door $30.00 shipped, part below hood tongue & between grills $20.00 shipped. More parts available, exterior trim, red windlace parts, hood tongue $45.00 shipped crack around middle hole, otherwise pretty nice.
Thanks.
Scott
c. 317-727-7041
ResizedImage_1391541893372_zps02f0940a.jpg
Thanks.
Scott
c. 317-727-7041
ResizedImage_1391541893372_zps02f0940a.jpg
#12
according to info provided by Joe Padavano the hubs will fit my '64 Jetstar88. That being the case I have been looking for a '69-'72 Cutlass as a donor for a disc brake conversion. I might be interested in the hubs and all brake related parts up to the firewall. Building on a budget (Who isn't) but really want to do this for safety's sake. If you can help price it forme please. Thanks, Mike
#17
twister,
The rear weatherstrip channel is really pretty nice. I'm talking to a guy about buying it right now. I'll try to get pix of the other areas when the weather breaks a bit.
The rear weatherstrip channel is really pretty nice. I'm talking to a guy about buying it right now. I'll try to get pix of the other areas when the weather breaks a bit.
#23
#31
Hi Scott, I am looking for the Dash vent valves, they are under the dash on each side, they should be about 3 to 4 inches in diameter and bolt through a hole in the upper kick panel area. Does the car still have them in it and if so would you sell them?
Thank you in advance.
Kevin
Thank you in advance.
Kevin
#32
Hello again Scott, looking for some more 69 442 parts, do you still have the parts car? If so I am looking for the trim piece that trims out the top of the door openings L/R that trims out the head liner, on my 68 they are white metal but on my 69 they were a vinyl, like the rear window trim!! Any chance you have these parts??
Thanks again.
Kevin
Thanks again.
Kevin
Thread
Thread Starter
Forum
Replies
Last Post
oldspackrat
Parts For Sale
14
April 4th, 2015 06:21 AM
ohiocutlassparts
Parts For Sale
0
January 21st, 2014 06:50 AM
88hurstolds
Parts For Sale
27
July 16th, 2012 04:38 PM