71 Cutlass Supreme Rear Bumper
September 19th, 2013, 09:30 AM
#1
NOVICE car nut
Thread Starter
Join Date: Nov 2010
Location: Milwaukee Wisconsin
Posts: 3,123
71 Cutlass Supreme Rear Bumper
Hey all , I wanted to give someone the chance to come and get this if they need it .... for free ! Bumper brackets NOT included PRICE FOR BRACKETS $ 10 EACH once I remove black tar and examine . Chrome peeling on bumper , dents , rust hole , and the back side has some kid of black tar or rust proofing smeared all over it .
I'm in Milwaukee WI ....
I'm in Milwaukee WI ....
Last edited by oldsguybry; October 29th, 2013 at 08:11 AM.
September 19th, 2013, 10:11 AM
#2
NOVICE car nut
Thread Starter
Join Date: Nov 2010
Location: Milwaukee Wisconsin
Posts: 3,123
More
Here are the parts I took off of the bumper in question , and yes , the PO got the tar crap all over anything that bolted to the back of the bumper to , and he also cut the wires like shown . The taillight assembly without the metal shield bolted to it has a bad bulb socket ....
PRICE $20 eachfor taillight buckets .... wires cut , and I know one bulb socket is bad .
PRICE $10 each for taillight bucket guards .
PRICE $20 for license plate holder ( spring good )
PRICE $20 for outer , PRICE $10 for inner lenses .
PRICE $20 eachfor taillight buckets .... wires cut , and I know one bulb socket is bad .
PRICE $10 each for taillight bucket guards .
PRICE $20 for license plate holder ( spring good )
PRICE $20 for outer , PRICE $10 for inner lenses .
Last edited by oldsguybry; October 29th, 2013 at 08:12 AM.
September 19th, 2013, 12:22 PM
#3
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
You should take off the bumper braces from the bumper and sell them separately too. They're probably worth more than the bumper. The tag light/rock guards and backup lights should be easy to restore. What condition are those light bucket gaskets in?
September 19th, 2013, 12:28 PM
#4
NOVICE car nut
Thread Starter
Join Date: Nov 2010
Location: Milwaukee Wisconsin
Posts: 3,123
edit .... I will check to see if the lenses are original equipment too . I'm sure they are .
Last edited by oldsguybry; September 19th, 2013 at 12:31 PM.
September 20th, 2013, 07:19 AM
#5
NOVICE car nut
Thread Starter
Join Date: Nov 2010
Location: Milwaukee Wisconsin
Posts: 3,123
Surprise , Surprise
Allan , it turns out the gaskets are still good . Nice and soft , but not like brand new ones of course . I would have to clean them up a bit , but there's no cuts or cracks in them as far as I can tell ....
October 13th, 2013, 05:08 PM
#9
Registered User
Join Date: Dec 2008
Location: Atlanta, GA.
Posts: 73
Dirver Side Tailligh Bucket
I need the driver side tail light bucket. I can't the light to twist in and stay on, on the top light connector. I'm not sure if they are interchangeable but I need the driver side light bucket if both the top and bottom light connectors work
October 13th, 2013, 06:04 PM
#10
NOVICE car nut
Thread Starter
Join Date: Nov 2010
Location: Milwaukee Wisconsin
Posts: 3,123
I know it will work with 71 and 72 Cutlass . The wires on the taillights were cut by the PO when they took the bumper off of another car , so I can check to see if the taillight bucket works properly on my car . I had a bad bulb socket on the passenger side of my car , so I swapped that side out with the one off of the bumper I'm trying to get rid of , and it works great . I will splice this one on and check it for you , and let you know .
October 17th, 2013, 09:52 PM
#12
NOVICE car nut
Thread Starter
Join Date: Nov 2010
Location: Milwaukee Wisconsin
Posts: 3,123
Thread
Thread Starter
Forum
Replies
Last Post
deltas1982
Parts Wanted
15
December 7th, 2014 06:19 PM
w31man
Parts For Sale
10
June 10th, 2014 04:39 PM
