1969 Delta 88, 98 convertible parts, seats, rubber, trim, glass, interior
#1
1969 Delta 88, 98 convertible parts, seats, rubber, trim, glass, interior
I am parting out a '69 Impala convertible & I know some(all?) of the convertible parts will interchange with other makes. I have the windshield & trim, nice top weatherstrips, rear seat cores, rear side panels, top cylinders, pump & lines, tack strip, & header bow. All parts are in Indianapolis & can be shipped. Price varies by item.
Thanks.
Scott
c. 317-727-7041
Thanks.
Scott
c. 317-727-7041
#3
What did you call me!?!?
The hood for the Impala is wavy, probably due to the 3 or 4 layers of paint I see, but otherwise seems to be decent/good.
I'll try to get pictures & more details tomorrow?
Thanks.
Scott
The hood for the Impala is wavy, probably due to the 3 or 4 layers of paint I see, but otherwise seems to be decent/good.
I'll try to get pictures & more details tomorrow?
Thanks.
Scott
#4
How good is the inside rear view mirror, and what is the width of it? Is the front seat power? I need the lower aluminum seat trim for a power seat, with the cut outs for the seat switch. thanks Junk.
#6
Hosenose,
I looked at the tank & it looks ok to me. I'll have to drop it to check the top of it to be sure though. I don't know if this will fit a Delta, can you check & see?
Junkman,
I'll try to check the mirror this weekend. It is not a power seat, sorry.
Scott
I looked at the tank & it looks ok to me. I'll have to drop it to check the top of it to be sure though. I don't know if this will fit a Delta, can you check & see?
Junkman,
I'll try to check the mirror this weekend. It is not a power seat, sorry.
Scott
#10
Im looking for the upright piston cover for the passenger side, (interior) the small trim piece on the corner of the right fender, (meets with the hood trim) and the trim the goes around the back edge where the convertible top meets the body. That piece is pictured. I appoligise in advanced, I'm sure my terminology is off but pm me back just the same with prices and availibility
#12
Drunk,
No picture seen, but I'll check on the parts today hopefully.
M371961
No idea, maybe check with a parts catalog or on ebay? I think they would be the same, but can't guarantee it.
No picture seen, but I'll check on the parts today hopefully.
M371961
No idea, maybe check with a parts catalog or on ebay? I think they would be the same, but can't guarantee it.
#13
#14
Junk,
I checked the mirror today & of course it's cracked. It is right at 12" wide & you could install a new mirror though. $20.00 shipped? Lmk
Drunk,
The conv. top well trim is pretty straight, but someone has installed a few rivets to hold it to the body. I'd imagine you want some thing nicer? Do you need the trim piece at the rear of the fender by the windshield? I don't see any trim at the front of it.
Scott
I checked the mirror today & of course it's cracked. It is right at 12" wide & you could install a new mirror though. $20.00 shipped? Lmk
Drunk,
The conv. top well trim is pretty straight, but someone has installed a few rivets to hold it to the body. I'd imagine you want some thing nicer? Do you need the trim piece at the rear of the fender by the windshield? I don't see any trim at the front of it.
Scott
#16
Thanks .. I already have a cracked one, and I haven't found anyone that can replace the mirror. It is a special glass that was used because of the day / night feature. Thanks for checking for me. Junk..
#17
Well honestly I'm gonna be hard pressed to find that piece and I'm not building a show car.:/ I don't have one at all I suppose I could put a few rivets in the same spots. If u think u can get it off easy enough and the price is right I might want that and the fender piece. I'm in Rochester new York if it's worth your while let me know what it would run me, shipped. Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
197064buickspec
Parts For Sale
0
August 4th, 2014 12:26 PM
oldspackrat
Parts For Sale
10
May 15th, 2014 04:20 PM
MDchanic
Body work
6
July 21st, 2011 07:06 PM
allwood2006
Parts Wanted
3
November 12th, 2009 11:52 AM