Bunch of 70-72' Cutlass parts for sale, and more:
February 11th, 2013, 09:13 PM
#1
JC
Thread Starter
Join Date: Feb 2012
Location: So Florida
Posts: 1,069
Bunch of 70-72' Cutlass parts for sale, and more:
Bunch of 70-72' Cutlass parts for sale:
Some of the items have been sandblasted and primed, some electro powder coated.
Im not trying to make a killing off any of it, just to offset some of the $ Ive spent so far, and raise some more for stuff still ahead of me that I need. If you really need several parts, I will try and work something out very fair with you.
Parts + actual ship
- Restored Speedos, reset odometers to zero.
- NIB TIMKEN Bearings and Seals for 28\30 spline axles $45
All these parts are original, off a 71' Cutlass S:
- 2\3 core Top Radiator support plate, blasted and primed.- $75
- OEM Timing cover, blasted and primed with high heat primer, with new crankshaft seal- $40
- Very decent steering rag joint, no tears, all there $10
- 1 New Raybestos Pro grade 505-1102 ball joint, fits lots of models including 80's Cutlass. $15
- New 71'-72' M&H # 17565 TH400 Trans Gas pedal switch to engine harness $20 shipped.
This is the one- http://www.opgi.com/p/wiring-harness.../34/17565.html
- NOS Tick Tock tach face plate - $60 SOLD
- NIB Eaton Posi 8.5 10 bolt Diff 19557-010 (also in another ad) $410SOLD
- NIB 64-72' Cutlass A body Front tubular control arms. 2nd generation.
solid arms. $275 SOLD
-68-72' front Disc - less than 20 miles on them. Make offer
-68-72' rear Drums same as above
- 2 front Fender braces with rubber flange thingys
$35 SOLD
- OEM 71' Disc\Drum brake proportional valve. Tested and verified works great, off my car. I went to Disc\Disc setup- $20 SOLD
- Two 71' Cutlass Blue Sun visors - great shape. No rips or tears $15 SOLD
- New Spicer 31 spline heavy duty Tranny yoke. Fits my 72' TH400 splines, but I have the rubber seal version tranny shaft, so this one does not have the recess to accomodate... not sure of the proper description here. Its a 1350 yoke, 5 inch shaft (short tailshaft?) $40 SOLD
PICS of some of the above BELOW, more to come:
Shipping will only be the actual cost of shipping.
Some of the items have been sandblasted and primed, some electro powder coated.
Im not trying to make a killing off any of it, just to offset some of the $ Ive spent so far, and raise some more for stuff still ahead of me that I need. If you really need several parts, I will try and work something out very fair with you.
Parts + actual ship
- Restored Speedos, reset odometers to zero.
- NIB TIMKEN Bearings and Seals for 28\30 spline axles $45
All these parts are original, off a 71' Cutlass S:
- 2\3 core Top Radiator support plate, blasted and primed.- $75
- OEM Timing cover, blasted and primed with high heat primer, with new crankshaft seal- $40
- Very decent steering rag joint, no tears, all there $10
- 1 New Raybestos Pro grade 505-1102 ball joint, fits lots of models including 80's Cutlass. $15
- New 71'-72' M&H # 17565 TH400 Trans Gas pedal switch to engine harness $20 shipped.
This is the one- http://www.opgi.com/p/wiring-harness.../34/17565.html
- NOS Tick Tock tach face plate - $60 SOLD
- NIB Eaton Posi 8.5 10 bolt Diff 19557-010 (also in another ad) $410SOLD
- NIB 64-72' Cutlass A body Front tubular control arms. 2nd generation.
solid arms. $275 SOLD
-68-72' front Disc - less than 20 miles on them. Make offer
-68-72' rear Drums same as above
- 2 front Fender braces with rubber flange thingys
$35 SOLD - OEM 71' Disc\Drum brake proportional valve. Tested and verified works great, off my car. I went to Disc\Disc setup- $20 SOLD
- Two 71' Cutlass Blue Sun visors - great shape. No rips or tears $15 SOLD
- New Spicer 31 spline heavy duty Tranny yoke. Fits my 72' TH400 splines, but I have the rubber seal version tranny shaft, so this one does not have the recess to accomodate... not sure of the proper description here. Its a 1350 yoke, 5 inch shaft (short tailshaft?) $40 SOLD
PICS of some of the above BELOW, more to come:
Shipping will only be the actual cost of shipping.
Last edited by JCMC64; May 23rd, 2016 at 10:30 PM.
February 11th, 2013, 11:16 PM
#5
JC
Thread Starter
Join Date: Feb 2012
Location: So Florida
Posts: 1,069
Raybestos 505-1102 ball joint Fits following vehicles:
BUICK SKYHAWK (1982 - 1989)
BUICK SKYLARK (1986 - 1998)
BUICK SOMERSET (1986 - 1987)
BUICK SOMERSET REGAL 1985
CADILLAC CIMARRON (1982 - 1988)
CHEVROLET BERETTA (1987 - 1996)
CHEVROLET CAVALIER (1982 - 2005)
CHEVROLET CORSICA (1987 - 1996)
OLDSMOBILE ACHIEVA (1992 - 1998)
OLDSMOBILE CALAIS (1985 - 1987)
OLDSMOBILE CUTLASS CALAIS (1988 - 1991)
OLDSMOBILE FIRENZA (1982 - 1988)
PONTIAC GRAND AM (1985 - 1998)
PONTIAC J2000 (1982 - 1985)
PONTIAC SUNBIRD (1986 - 1994)
PONTIAC SUNFIRE (1995 - 2005)
PONTIAC TEMPEST (1987 - 1991)
BUICK SKYHAWK (1982 - 1989)
BUICK SKYLARK (1986 - 1998)
BUICK SOMERSET (1986 - 1987)
BUICK SOMERSET REGAL 1985
CADILLAC CIMARRON (1982 - 1988)
CHEVROLET BERETTA (1987 - 1996)
CHEVROLET CAVALIER (1982 - 2005)
CHEVROLET CORSICA (1987 - 1996)
OLDSMOBILE ACHIEVA (1992 - 1998)
OLDSMOBILE CALAIS (1985 - 1987)
OLDSMOBILE CUTLASS CALAIS (1988 - 1991)
OLDSMOBILE FIRENZA (1982 - 1988)
PONTIAC GRAND AM (1985 - 1998)
PONTIAC J2000 (1982 - 1985)
PONTIAC SUNBIRD (1986 - 1994)
PONTIAC SUNFIRE (1995 - 2005)
PONTIAC TEMPEST (1987 - 1991)
Last edited by JCMC64; March 26th, 2013 at 05:54 AM.
March 9th, 2013, 06:15 PM
#14
JC
Thread Starter
Join Date: Feb 2012
Location: So Florida
Posts: 1,069
Got more parts to add... pretty much all 70 - 72 cutlass:
70-72 driver side kick panel
70-72 Oem Front brake caliper brackets. Media blasted
70-72 bumper guards twith rubber.
455 Chrome engine and oil dipsticks...new unused
New upper ball joints
Taking offers on everything
70-72 driver side kick panel
70-72 Oem Front brake caliper brackets. Media blasted
70-72 bumper guards twith rubber.
455 Chrome engine and oil dipsticks...new unused
New upper ball joints
Taking offers on everything
March 12th, 2013, 05:17 PM
#16
JC
Thread Starter
Join Date: Feb 2012
Location: So Florida
Posts: 1,069
72Abody, did you get my pm to you the other day?
Yes, its available If you meant the rear end Posi unit that is. Thx.
PS...I live in South Florida.
Yes, its available If you meant the rear end Posi unit that is. Thx.
PS...I live in South Florida.
Last edited by JCMC64; March 12th, 2013 at 05:41 PM.
May 30th, 2014, 07:28 AM
#27
I will take the dip sticks, and any suspension stuff you have left. I have a 72 Cutlass putting in a 455 & AC still has all original stock suspension with a 350 trans.
Would love to upgrade trans to the TH400 and install a shift kit and will need AC compressor & all brackets. It did have factory air that was removed by PO. If anyone has any leads for a trans I'm your guy.
Would love to upgrade trans to the TH400 and install a shift kit and will need AC compressor & all brackets. It did have factory air that was removed by PO. If anyone has any leads for a trans I'm your guy.
May 30th, 2014, 07:34 AM
#28
JC
Thread Starter
Join Date: Feb 2012
Location: So Florida
Posts: 1,069
I will take the dip sticks, and any suspension stuff you have left. I have a 72 Cutlass putting in a 455 & AC still has all original stock suspension with a 350 trans.
Would love to upgrade trans to the TH400 and install a shift kit and will need AC compressor & all brackets. It did have factory air that was removed by PO. If anyone has any leads for a trans I'm your guy.
Would love to upgrade trans to the TH400 and install a shift kit and will need AC compressor & all brackets. It did have factory air that was removed by PO. If anyone has any leads for a trans I'm your guy.
Thread
Thread Starter
Forum
Replies
Last Post
JCMC64
Parts For Sale
19
February 2nd, 2019 10:22 AM
FlyingV5150
Electrical
9
December 24th, 2013 01:36 PM
angelica
General Discussion
3
September 29th, 2012 07:06 PM
