Big Block Race Engine
#1
Big Block Race Engine
My good friend Don, who also goes by (80 Rocket) has a race motor for sale. I know times are hard and money is even harder to come by, but this sounds like a pretty good deal to me-
If you have any questions about this engine
you should call Don @ 262-331-3317
80 Rocket
Joined: 10 Mar 2005
Posts: 1917
Location: Caledonia, WI
Posted: Tue Aug 21, 2012 3:56 pmPost subject: 482 BBO race motor I have a motor I am selling for a friend. It is a 482 (4.250x4.250) race BBO. The motor was said to be built by Chuck Samuels from Fast Times in Illinios. I can't verify that, so take it with a grain of salt.
The engine does only have dyno time on it, and it is said to have made 680HP on the dyno. Again, I cannot verify that as there is no dyno sheet so take it how you wish.
Specs:
- 12:1 compression
- JE flat-top pistons (small valve reliefs)
- block is half filled for cylinder wall stability
- ARP head/main studs
- Aluminum rods (.020 piston to deck clearance)
- reworked stock crank
- Clevite rods/main bearings (.003 rods/ .0035 main clearance)
- 2.07/1.71 valve C heads with a lot of porting done to them
- block is o-ringed
- Crower solid flat tappet cam 300/308 dur.-- 260/268 @ .050-- .584/.601 lift
- Harland Sharp pedestal 1.6 rockers
- Melling hi-volume pump
- Milodon 9 qt oil pan
- Mondello double roller chain (not sure who really makes it, ProGear????)
- ATI harmonic balancer
- Comp Cams 5/16 pushrods
- bronze button for cam end play
- Offy Super Sonic intake w/ Dominator flange
- tall polished Moroso valve covers
Over $10000 invested, looking to get $5000. pm if interested.
Joined: 10 Mar 2005
Posts: 1917
Location: Caledonia, WI
Posted: Tue Aug 21, 2012 3:56 pmPost subject: 482 BBO race motor I have a motor I am selling for a friend. It is a 482 (4.250x4.250) race BBO. The motor was said to be built by Chuck Samuels from Fast Times in Illinios. I can't verify that, so take it with a grain of salt.
The engine does only have dyno time on it, and it is said to have made 680HP on the dyno. Again, I cannot verify that as there is no dyno sheet so take it how you wish.
Specs:
- 12:1 compression
- JE flat-top pistons (small valve reliefs)
- block is half filled for cylinder wall stability
- ARP head/main studs
- Aluminum rods (.020 piston to deck clearance)
- reworked stock crank
- Clevite rods/main bearings (.003 rods/ .0035 main clearance)
- 2.07/1.71 valve C heads with a lot of porting done to them
- block is o-ringed
- Crower solid flat tappet cam 300/308 dur.-- 260/268 @ .050-- .584/.601 lift
- Harland Sharp pedestal 1.6 rockers
- Melling hi-volume pump
- Milodon 9 qt oil pan
- Mondello double roller chain (not sure who really makes it, ProGear????)
- ATI harmonic balancer
- Comp Cams 5/16 pushrods
- bronze button for cam end play
- Offy Super Sonic intake w/ Dominator flange
- tall polished Moroso valve covers
Over $10000 invested, looking to get $5000. pm if interested.
you should call Don @ 262-331-3317
Thread
Thread Starter
Forum
Replies
Last Post
nine8
Parts For Sale
11
March 25th, 2015 02:41 PM
Kennybill
Ninety-Eight
13
January 28th, 2009 03:51 AM