More NOS/very nice used mostly '70-'72 parts. unusual stuff.
November 16th, 2012, 09:49 AM
#1
Registered User
Thread Starter
Join Date: Sep 2010
Location: Indianapolis
Posts: 4,846
More NOS/very nice used mostly '70-'72 parts. unusual stuff.
11-26-2012 Some items sold & price drops on some of the remaining stock.
Still sorting out some of the parts I got a couple weeks ago & here are some more nice or NOS items. All prices are plus shipping & I will combine shipping.
Check the pictures carefully & I can get more detailed info/pictures of anything.
Three NOS AC PF30 oil filters. These are the white ones that I think originally came on a lot of cars from the late '60's to mid '70's. The boxes are a bit tattered & beat up, & two of the filters have some TINY specks of rust on the bare metal part, but will clean up easily & look very nice otherwise. Like to get $100.00 each. SOLD
NOS Dash wiring harness for the optional courtesy light package. $30.00. SOLD
NOS blower motor capacitor with attached harness. $20.00 SOLD
Two new washer jar caps. $5.00 each.
New rear coil spring insulator. $5.00.
Four new bucket seat bumper. Visible when you tilt the seat forward. $10.00 a pair, or $15.00 for all 4.SOLD
New Gas cap, oil cap, & radiator cap, $5.00 each. SOLD
NOS dashpot for carburetor. $75.00. SOLD
Nice used dashpot $45.00. SOLD
New high beam headlight switch $10.00 SOLD
New Thermactor switch, small round plastic piece inside the air cleaner $20.00
Six new door strikers $15.00 each.
Two horn contact kits, small spring & plunger & plastic ring $5.00 each. SOLD
New GM timing gear with nylon teeth. $15.00
Two oil pressure switches, terminals are not exactly like factory & they are for the cars WITHOUT the rallye pack(gauges) $10.00 each.
Two NOS coolant temp switches $15.00 each.
Two NOS pcv valves CV679C $7.00 each.
One NOS wiper motor shaft, from inside the motor to the wiper linkage $15.00.
Two NOS '70 Cutlass fender emblems G.M. parts $40.00 for the pair. SOLD
Two rubber elbows for the pcv system. $5.00 each. SOLD
New or NOS distributor vacuum advance $15.00. SOLD
Nice used starter brace & shield $25.00 for the pair. SOLD
Crank case breather filter G.M. $18.00.
New jack hook with wing nut $15.00 for the pair. SOLD
New hood insulation square push in clips. $5.00 for the bag. SOLD
New repro radiator & heater hose clamps. $10.00 for the set. SOLD
NOS G.M. antenna lead from windshield to radio $25.00. SOLD
Nice, pretty clean original voltage regulator with correct cover $20.00.
New repro voltage regulator $30.00.
New under hood vacuum line with white stripe $5.00. SOLD
New washer hose $5.00. SOLD
Nice used vacuum switch for non AC cars? $15.00. SOLD
New repro front license plate bracket $18.00.
New '70 Cutlass license plate frame $7.00. SOLD
New repro 4 bbl throttle cable $50.00. SOLD
Misc. radiator tags OR, OU, & WS $10.00 each. SOLD
Several decent/nice '70-'71 Supreme, SX wide side moldings. Price depends on which part you want. I also have a few more nice of these moldings.
One rechromed '70 hood spear, nice, but not perfect. Still has some very small imperfections. $30.00. SOLD
New differential vent $5.00. SOLD
Overview picture of parts.
http://i856.photobucket.com/albums/a...-42-40_586.jpg
More details, next three links.
http://i856.photobucket.com/albums/a...-43-00_361.jpg
http://i856.photobucket.com/albums/a...-43-11_234.jpg
http://i856.photobucket.com/albums/a...-43-58_461.jpg
PF AC 30 oil filters.
http://i856.photobucket.com/albums/a...-44-05_690.jpg
Supreme side moldings.
http://i856.photobucket.com/albums/a...-44-21_693.jpg
Radiator tags.
http://i856.photobucket.com/albums/a...2-40-38_96.jpg
Still sorting out some of the parts I got a couple weeks ago & here are some more nice or NOS items. All prices are plus shipping & I will combine shipping.
Check the pictures carefully & I can get more detailed info/pictures of anything.
Three NOS AC PF30 oil filters. These are the white ones that I think originally came on a lot of cars from the late '60's to mid '70's. The boxes are a bit tattered & beat up, & two of the filters have some TINY specks of rust on the bare metal part, but will clean up easily & look very nice otherwise. Like to get $100.00 each. SOLD
NOS Dash wiring harness for the optional courtesy light package. $30.00. SOLD
NOS blower motor capacitor with attached harness. $20.00 SOLD
Two new washer jar caps. $5.00 each.
New rear coil spring insulator. $5.00.
Four new bucket seat bumper. Visible when you tilt the seat forward. $10.00 a pair, or $15.00 for all 4.SOLD
New Gas cap, oil cap, & radiator cap, $5.00 each. SOLD
NOS dashpot for carburetor. $75.00. SOLD
Nice used dashpot $45.00. SOLD
New high beam headlight switch $10.00 SOLD
New Thermactor switch, small round plastic piece inside the air cleaner $20.00
Six new door strikers $15.00 each.
Two horn contact kits, small spring & plunger & plastic ring $5.00 each. SOLD
New GM timing gear with nylon teeth. $15.00
Two oil pressure switches, terminals are not exactly like factory & they are for the cars WITHOUT the rallye pack(gauges) $10.00 each.
Two NOS coolant temp switches $15.00 each.
Two NOS pcv valves CV679C $7.00 each.
One NOS wiper motor shaft, from inside the motor to the wiper linkage $15.00.
Two NOS '70 Cutlass fender emblems G.M. parts $40.00 for the pair. SOLD
Two rubber elbows for the pcv system. $5.00 each. SOLD
New or NOS distributor vacuum advance $15.00. SOLD
Nice used starter brace & shield $25.00 for the pair. SOLD
Crank case breather filter G.M. $18.00.
New jack hook with wing nut $15.00 for the pair. SOLD
New hood insulation square push in clips. $5.00 for the bag. SOLD
New repro radiator & heater hose clamps. $10.00 for the set. SOLD
NOS G.M. antenna lead from windshield to radio $25.00. SOLD
Nice, pretty clean original voltage regulator with correct cover $20.00.
New repro voltage regulator $30.00.
New under hood vacuum line with white stripe $5.00. SOLD
New washer hose $5.00. SOLD
Nice used vacuum switch for non AC cars? $15.00. SOLD
New repro front license plate bracket $18.00.
New '70 Cutlass license plate frame $7.00. SOLD
New repro 4 bbl throttle cable $50.00. SOLD
Misc. radiator tags OR, OU, & WS $10.00 each. SOLD
Several decent/nice '70-'71 Supreme, SX wide side moldings. Price depends on which part you want. I also have a few more nice of these moldings.
One rechromed '70 hood spear, nice, but not perfect. Still has some very small imperfections. $30.00. SOLD
New differential vent $5.00. SOLD
Overview picture of parts.
http://i856.photobucket.com/albums/a...-42-40_586.jpg
More details, next three links.
http://i856.photobucket.com/albums/a...-43-00_361.jpg
http://i856.photobucket.com/albums/a...-43-11_234.jpg
http://i856.photobucket.com/albums/a...-43-58_461.jpg
PF AC 30 oil filters.
http://i856.photobucket.com/albums/a...-44-05_690.jpg
Supreme side moldings.
http://i856.photobucket.com/albums/a...-44-21_693.jpg
Radiator tags.
http://i856.photobucket.com/albums/a...2-40-38_96.jpg
Last edited by oldspackrat; July 31st, 2013 at 06:02 AM.
November 16th, 2012, 10:02 AM
#2
Registered User
Join Date: May 2009
Posts: 1,452
In the third link, about in the middle is a rubber elbow which connects into the factory breather element in the valve cover, pictured in the right corner of same picture.
How does that elbow connect to the air cleaner? Is another hose needed? Is that the same hose that comes from the air cleaner?
How does that elbow connect to the air cleaner? Is another hose needed? Is that the same hose that comes from the air cleaner?
Last edited by jpc647; November 16th, 2012 at 10:06 AM.
November 16th, 2012, 01:07 PM
#5
Registered User
Join Date: Aug 2009
Location: St. Louis, Missouri
Posts: 969
You can see the vent pipe in 4th link, top middle. The pipe for a 350 cid is slightly shorter than one for a 455.
November 19th, 2012, 09:53 AM
#10
Registered User
Join Date: Dec 2011
Posts: 7,286
New Gas cap, oil cap, & radiator cap, $5.00 each.
sounds great
lemme ck them photos
shoot, wrong for my car
What is the ID on that distributor vacuum advance unit? ###-##
Width or PN on that plastic timing gear? SB's are narrower and I have a dozen of those.
sounds great
lemme ck them photos
shoot, wrong for my car
What is the ID on that distributor vacuum advance unit? ###-##
Width or PN on that plastic timing gear? SB's are narrower and I have a dozen of those.
Last edited by Octania; November 19th, 2012 at 09:59 AM.
November 19th, 2012, 01:50 PM
#13
delete
Join Date: Apr 2008
Location: Long Island, NY
Posts: 2,807
November 20th, 2012, 08:43 AM
#15
Registered User
Join Date: May 2009
Posts: 1,452
I need the elbow from that valve cover breather, and the elbow piece in the forth link that connects to the air cleaner. Not sure what you call them, pm me with price?
If they've both been sold, do you still have have pictures, maybe I can use the part number to find them elsewhere. Also, are both horn contact kits been sold?
Thank You.
If they've both been sold, do you still have have pictures, maybe I can use the part number to find them elsewhere. Also, are both horn contact kits been sold?
Thank You.
Last edited by jpc647; November 20th, 2012 at 08:45 AM.
January 7th, 2013, 01:27 PM
#21
Registered User
Thread Starter
Join Date: Sep 2010
Location: Indianapolis
Posts: 4,846
Kay,
Here is a picture of the customs label, I shipped it out on November 26th. This is the first I've heard about this part not making it there, besides the pm. The pm hit my mailbox at 11:53 last night & I was working all day today & just saw it a little bit ago. Maybe you can input the number at the top of the label & see if it's in their system. I am going to ship some parts tomorrow, I'll take the label & see if they can tell me anything on this end.
Please feel free to get back with me in a day or two?
Thanks.
Scott
http://i856.photobucket.com/albums/a...-18-27_125.jpg
Here is a picture of the customs label, I shipped it out on November 26th. This is the first I've heard about this part not making it there, besides the pm. The pm hit my mailbox at 11:53 last night & I was working all day today & just saw it a little bit ago. Maybe you can input the number at the top of the label & see if it's in their system. I am going to ship some parts tomorrow, I'll take the label & see if they can tell me anything on this end.
Please feel free to get back with me in a day or two?
Thanks.
Scott
http://i856.photobucket.com/albums/a...-18-27_125.jpg
July 30th, 2013, 09:09 AM
#24
Registered User
Join Date: Dec 2012
Location: DELCAMBRE, LOUISIANA
Posts: 530
Hey scott would like to get the blower capacitor. and if u have a good ground strap that run from to fire wall to the cyl. head With u could u put it in at pile for me thanks ray
Last edited by NDERISE; July 30th, 2013 at 12:22 PM.
July 30th, 2013, 03:27 PM
#25
Registered User
Thread Starter
Join Date: Sep 2010
Location: Indianapolis
Posts: 4,846
Tony,
I'm sure I can get you a good wiper arm, or just the spring if you want one? Lmk.
Ray,
I'll start a pile for you, good to finally meet you & let me know what else you may need.
Scott
I'm sure I can get you a good wiper arm, or just the spring if you want one? Lmk.
Ray,
I'll start a pile for you, good to finally meet you & let me know what else you may need.
Scott
July 31st, 2013, 06:31 AM
#27
Registered User
Join Date: Jul 2010
Location: Montreal, QC
Posts: 2,175
July 31st, 2013, 10:15 AM
#29
Registered User
Thread Starter
Join Date: Sep 2010
Location: Indianapolis
Posts: 4,846
Anthony,
It is sold, one of the guys from Inline tube bought it at a show recently. I have several nice used ones though if that will do.
Still trying to get the codes for you too.
Scott
It is sold, one of the guys from Inline tube bought it at a show recently. I have several nice used ones though if that will do.
Still trying to get the codes for you too.
Scott
July 31st, 2013, 11:16 AM
#30
Registered User
Join Date: Feb 2009
Location: Poconos, Pennsylvania
Posts: 2,029
Hi Scott.
Let me get back to you on the wiring harness. Thought it would be nice to have new wiring for the courtesy lights. Not sure if we have a used wiring harness or it's condition. How much would it be just in case we do need it? Thanks for checking on the axle codes.
Anthony
Let me get back to you on the wiring harness. Thought it would be nice to have new wiring for the courtesy lights. Not sure if we have a used wiring harness or it's condition. How much would it be just in case we do need it? Thanks for checking on the axle codes.
Anthony
August 1st, 2013, 07:03 AM
#32
Registered User
Thread Starter
Join Date: Sep 2010
Location: Indianapolis
Posts: 4,846
Tony,
Shoot me a pm with your address again & I'll get one on the way. I have about 25 sets of wiper arms in boxes & I'm sure I can find one that is useable. $25.00 shipped reasonable?
Scott
Shoot me a pm with your address again & I'll get one on the way. I have about 25 sets of wiper arms in boxes & I'm sure I can find one that is useable. $25.00 shipped reasonable?
Scott
August 14th, 2013, 09:22 AM
#35
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Man if I didn't know you better this is just like the response you'd get from a lot of those scam artists who are working on a drilling rig offshore.... How's the Cutlass build going Tony? Haven't seen much from you about the car. Take that spring out and bead blast, it will look like new. Spray it with clear to keep it from rusting again. That wiper arm can be buffed up like new.
August 15th, 2013, 12:52 AM
#36
Registered User
Join Date: Jul 2010
Location: Montreal, QC
Posts: 2,175
Man if I didn't know you better this is just like the response you'd get from a lot of those scam artists who are working on a drilling rig offshore.... How's the Cutlass build going Tony? Haven't seen much from you about the car. Take that spring out and bead blast, it will look like new. Spray it with clear to keep it from rusting again. That wiper arm can be buffed up like new.
Car is actually going great! I got sick an tired of doing thing half assed so I stripped the car of all trim, doors, fenders, decklid, chrome. Took the car down to almost bear metal and primed and put down the first coat of DuPont paint.
I have so many pictures but can't upload from a cell phone.....
August 15th, 2013, 07:12 AM
#37
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Just got my frame all done yesterday and am waiting a few days for paint to cure before reinstalling brake lines and parts.
August 23rd, 2013, 07:45 AM
#38
Registered User
Join Date: Jul 2010
Location: Montreal, QC
Posts: 2,175
So i'm back in the saddle, do you think you can do 25 shipped to Montreal by USPS? If you need a couple extra bucks let me know and i'll send you a payment today.
Cheers,
-Tony
Thread
Thread Starter
Forum
Replies
Last Post
orange442
Parts For Sale
6
October 30th, 2019 08:07 AM
oldspackrat
Parts For Sale
14
April 4th, 2015 06:21 AM
oldspackrat
Parts For Sale
44
February 21st, 2014 04:00 PM
oldspackrat
Parts For Sale
19
February 26th, 2013 07:10 AM
