11971four4two

Selling a 1992 3.3 motor. It needs to be assembled.
The heads have been redone. The crank was ground and comes with new rod and main bearings
The rods have been reconditioned. Standard bore block and pistons
The engine comes with a new roller cam and lifters as well as gaskets and bolts
The exhaust manifolds , intake and flywheel will also be included
$700 or REASONABLE cash offer

3300 (LG7)

A smaller 3.3 L 3300 was introduced in 1989 and produced through 1993. It is effectively a lower-deck version of the 3800, with a smaller 3.7 in (93.98 mm) bore and 3.16 in (80.26 mm) stroke for 3,340 cc (204 cu in).[3] Like the 3800, it used a cast iron block and heads, push rods, and hydraulic lifters. Unlike the 3800, however, it used a batch-fire injection system rather than sequential injection, as evidenced by the lack of a cam position sensor. It also did not have a balance shaft. Power output was 160 hp (119 kW) at 5,200 rpm and 185 lb·ft (251 N·m) at 2,000 rpm with a 5,500 rpm redline.
Applications:

• 1989-1993 Buick Century
• 1989-1993 Buick Skylark
• 1992-1993 Pontiac Grand Am
• 1992-1993 Oldsmobile Achieva
• 1989-1991 Oldsmobile Calais
• 1989-1993 Oldsmobile Cutlass Ciera