NEW 355, race built $4000
#1
NEW 355, race built $4000 FREE SHIPPING!!
FREE SHIPPING!
I have a 355 that I'm not sure that I want to put in a project anymore, might be overkill for what it's going in. It's literally intake to oil pan, get your own carb and ignition and go. Here are the specs
Olds 350/355
1971 Low Compression 350 Bored .030
#7 heads ported and machined for big valves and bronze guides
stainless Manley 2.07/1.68 swirl polished and undercut valves
Rotating assembly balanced(+/-2g)
Comp Cams K42-224-4
SFI Flexplate
SFI Balancer
Speed Pro L2320F30 Flat Top Pistons
Chevy 6" 5140 lightweight I-Beam rods bored to Olds rod pin bore
Comp Cams roller tip rockers
Crank Scraper Rocket Racing
crank grind to 2.1" Chevy and offset to 0 deck
clevite rod bearings
Paint in Oldsmobile Blue
Melling M22FHV High volume oil pump
aluminum valve covers
Heavy duty oil pump driveshaft
Oil Pan Moroso 20480
pickup Moroso 24461
Mini Starter
Offenhauser 360 Intake
Clevite main bearings
ARP hardware everywhere
Call or text if you're serious...I mean...ya need an engine or you don't. $4000 shipped or best offer
thanks,
Dan
815-298-2912
I have a 355 that I'm not sure that I want to put in a project anymore, might be overkill for what it's going in. It's literally intake to oil pan, get your own carb and ignition and go. Here are the specs
Olds 350/355
1971 Low Compression 350 Bored .030
#7 heads ported and machined for big valves and bronze guides
stainless Manley 2.07/1.68 swirl polished and undercut valves
Rotating assembly balanced(+/-2g)
Comp Cams K42-224-4
SFI Flexplate
SFI Balancer
Speed Pro L2320F30 Flat Top Pistons
Chevy 6" 5140 lightweight I-Beam rods bored to Olds rod pin bore
Comp Cams roller tip rockers
Crank Scraper Rocket Racing
crank grind to 2.1" Chevy and offset to 0 deck
clevite rod bearings
Paint in Oldsmobile Blue
Melling M22FHV High volume oil pump
aluminum valve covers
Heavy duty oil pump driveshaft
Oil Pan Moroso 20480
pickup Moroso 24461
Mini Starter
Offenhauser 360 Intake
Clevite main bearings
ARP hardware everywhere
Call or text if you're serious...I mean...ya need an engine or you don't. $4000 shipped or best offer
thanks,
Dan
815-298-2912
Last edited by brownbomber77; October 22nd, 2013 at 08:48 PM.
#2
Oh, it's in Rockford, IL, about 90 miles northwest of Chicago. I can get it between there and Miami for a nominal fee as I have a friend with a shipping company. Trying to find pictures I had of it, will post as soon as I can.
thanks,
Dan
815-298-2912
thanks,
Dan
815-298-2912
#3
Here are pictures of the engine. Sorry I don't have more.
http://s1169.photobucket.com/albums/...mmilus84/Olds/
http://s1169.photobucket.com/albums/...mmilus84/Olds/
#4
Wait, I lied...here are more, they're on my brother's photobucket page
http://s1169.photobucket.com/albums/...cpZZ2QQtppZZ28
http://s1169.photobucket.com/albums/...cpZZ2QQtppZZ28
#6
Well there's a chime in from the area at least...where can I take it and how much does it cost? I get back from Ft Benning in September and was hoping to see what she'll lay down. I'm sure there's a few places in Chicago, but anything up I90 toward Rockford?
#27
Off brand something rods, inspected by my machinist.
http://www.ebay.com/itm/Chevy-I-Beam...219796&vxp=mtr
Automotive machine service, belvedere, IL. He's been doing all my machining for 10 years and inherited the business from his father 30 years ago. Good machine shops don't fail near Rockford, IL.
http://www.ebay.com/itm/Chevy-I-Beam...219796&vxp=mtr
Automotive machine service, belvedere, IL. He's been doing all my machining for 10 years and inherited the business from his father 30 years ago. Good machine shops don't fail near Rockford, IL.
Thread
Thread Starter
Forum
Replies
Last Post
11971four4two
Cars For Sale
3
December 10th, 2011 07:49 AM