68-69 Parts
July 15th, 2012, 01:42 PM
#1
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
68-69 Parts
Getting rid of all the mostly 68-69 stuff that I’ve accumulated and will probably never need again. All prices do not include shipping. I travel quite a bit in the Northeast so I can usually work out free delivery in that area of the country. I've got a lot more and will add and delete stuff as it sells
Complete Power trunk set-up EXCEPT the elusive acutator rod, $100
68 non A/C dash pad. No cracks, a couple small dents that are from a broken windshield laying on the plastic. I tweaked it over the summer by drilling a hole in the plastic behind, pushing out so it looks a lot better than this pic. $150
Complete Power trunk set-up EXCEPT the elusive acutator rod, $100
68 non A/C dash pad. No cracks, a couple small dents that are from a broken windshield laying on the plastic. I tweaked it over the summer by drilling a hole in the plastic behind, pushing out so it looks a lot better than this pic. $150
Last edited by allyolds68; October 20th, 2014 at 09:39 AM.
July 15th, 2012, 06:29 PM
#3
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
July 15th, 2012, 06:30 PM
#4
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
Few more things:
Two 65-69 top plate (top one is sold. Someone put three holes in for gauges ($45). (no, the console is not included )
Here's a shot of the top plate installed in the console
Two 65-69 top plate (top one is sold. Someone put three holes in for gauges ($45). (no, the console is not included )
Here's a shot of the top plate installed in the console
Last edited by allyolds68; October 20th, 2014 at 09:36 AM.
July 15th, 2012, 06:41 PM
#5
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
Complete driver’s side headlight housing that needs to be restored. Missing one post of the back. Crack on top as shown $40
Last edited by allyolds68; October 20th, 2014 at 09:34 AM.
July 16th, 2012, 04:27 AM
#10
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
The skin of the trunk lid is solid but the lower inside isn't great but could be repaired. Say $35 for the trunk lid
Here's a crappy pic of the trunk lid. If you're interested I can pull it out and get better pics of the underside
Here's a crappy pic of the trunk lid. If you're interested I can pull it out and get better pics of the underside
Last edited by allyolds68; October 20th, 2014 at 09:33 AM.
July 16th, 2012, 04:28 AM
#11
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
July 16th, 2012, 04:30 AM
#12
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
July 18th, 2012, 12:57 PM
#16
Registered User
Join Date: Apr 2007
Location: Millville,N.J.08332
Posts: 97
68 steering wheel
Would you happen to have a steering wheel for a 68 Cutlass? I would still be interested if the outer ring is cracked as long as the spokes and center are Ok. If you have one could you send photos and a price + shipping to 08332.
Thanks
Doug
Thanks
Doug
July 18th, 2012, 01:04 PM
#17
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
July 23rd, 2012, 11:02 PM
#19
Registered User
Join Date: Oct 2011
Location: El Paso, Texas
Posts: 441
I am looking for a 1968 Cutlass Horn relay, another 1968 one year only item lol. I bought a used one and it arrived today it is in pitiful condition so I'm looking for a nice one. The cover doesnt matter as i have a nice one of those but the plastic where the connectors go on if they weren't all busted and ready to turn to dust that would be really cool. Please let me know if you have one. Thanks ...Todd
July 24th, 2012, 06:05 AM
#20
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
Todd,
I have one. The good news is the plastic is in good shape. The bad news is two of the tabs are broken off and I haven't bench tested it to see if it even works.
I know if you're looking for function rather than presentation I bought a new one for my car from a regular auto parts store. I remember it wasn't cheap but it plugged right in. I never put the original and the new one next to each other to see the difference.
I have one. The good news is the plastic is in good shape. The bad news is two of the tabs are broken off and I haven't bench tested it to see if it even works.
I know if you're looking for function rather than presentation I bought a new one for my car from a regular auto parts store. I remember it wasn't cheap but it plugged right in. I never put the original and the new one next to each other to see the difference.
August 1st, 2012, 11:05 AM
#26
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
I've got a set that the driver's side is missing the vent **** and the driver's side grill is broken but they are clean with no cracks. The passenger side has a little loss of grain as I used some Simple Green and Steel wool to clean it up. I'll throw a coat of SEM Landau Black if you want too. Sold
Last edited by allyolds68; October 20th, 2014 at 09:28 AM.
August 7th, 2012, 02:43 AM
#28
Registered User
Join Date: Jul 2012
Posts: 22
68 mouldings
I just need the rear piece. If you want to seperate i will buy. I figured the labor to fix mine would constitute the purchase of another. Did you repair the headlight rings yourself? Mine both have broken pieces off them, i thought to just buy new from fusick because i have pieces missing. If you decide to sell let me know, and thanks for responding.
August 7th, 2012, 03:45 AM
#29
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
I just need the rear piece. If you want to seperate i will buy. I figured the labor to fix mine would constitute the purchase of another. Did you repair the headlight rings yourself? Mine both have broken pieces off them, i thought to just buy new from fusick because i have pieces missing. If you decide to sell let me know, and thanks for responding.
I have a restored driver's side headlight bucket for sale above
August 7th, 2012, 02:58 PM
#31
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
If you look above you'll see a picture of the one that's restored for $100 and the one that is not for $40. A ZIP would be really helpful for me to give you an accurate shipping cost.
August 8th, 2012, 07:07 AM
#32
Registered User
Join Date: Jul 2012
Posts: 22
August 15th, 2012, 07:19 PM
#36
Registered User
Join Date: Jan 2009
Location: Illinios
Posts: 44
All 68's had vent windows that is why the non air cars dont have vents in the dash in 68. 69 hardtop and convt. non air cars had vents in the dash because they went away with the vent window, unless it was a post coupe, since all the post coupes still had vent windows.
October 18th, 2012, 11:11 AM
#37
Registered User
Join Date: Oct 2011
Location: El Paso, Texas
Posts: 441
Do you still have the dash pad? Please email me at toddvcarroll@hotmail.com
October 18th, 2012, 02:38 PM
#39
Registered User
Thread Starter
Join Date: Jul 2008
Location: Seneca Falls, NY
Posts: 5,258
Do you still have the dash pad? Please email me at toddvcarroll@hotmail.com
