455 eng Ka heads & 350 eng #5 heads in texas
December 22nd, 2011, 02:36 PM
#1
The Rocket Astronomer
Thread Starter
Join Date: Mar 2009
Location: South Texas
Posts: 1,461
455 eng Ka heads & 350 eng #5 heads in texas
The 455 is a standard bore 455 shortblock with ka heads. the block was pulled from a early 1973 delta years ago and just tanked and honed and put in storage. F casting early block '70 - '72 455 396021. Serif type F. standard crank and rods included. The heads are not installed and are big valve Ka heads. 600.00 offer
The 350 was pulled from a 70 cutlass . It is a 70 date coded block .30 over with trw flat top pistons. Should hone out and re-ring using same pistons. Have # 5 heads and 1968 69 iron 4 barrel intake to go with if you want it. 400.00 offer
These motors are buildable cores, block, crank, rods/pistons, and heads- nothing else.
The 350 was pulled from a 70 cutlass . It is a 70 date coded block .30 over with trw flat top pistons. Should hone out and re-ring using same pistons. Have # 5 heads and 1968 69 iron 4 barrel intake to go with if you want it. 400.00 offer
These motors are buildable cores, block, crank, rods/pistons, and heads- nothing else.
Last edited by lunaboy; December 26th, 2011 at 09:46 PM. Reason: correction
December 3rd, 2016, 08:29 PM
#6
Registered User
Join Date: Sep 2016
Posts: 67
The 455 is a standard bore 455 shortblock with ka heads. the block was pulled from a early 1973 delta years ago and just tanked and honed and put in storage. F casting early block '70 - '72 455 396021. Serif type F. standard crank and rods included. The heads are not installed and are big valve Ka heads. 600.00 offer
The 350 was pulled from a 70 cutlass . It is a 70 date coded block .30 over with trw flat top pistons. Should hone out and re-ring using same pistons. Have # 5 heads and 1968 69 iron 4 barrel intake to go with if you want it. 400.00 offer
These motors are buildable cores, block, crank, rods/pistons, and heads- nothing else.
The 350 was pulled from a 70 cutlass . It is a 70 date coded block .30 over with trw flat top pistons. Should hone out and re-ring using same pistons. Have # 5 heads and 1968 69 iron 4 barrel intake to go with if you want it. 400.00 offer
These motors are buildable cores, block, crank, rods/pistons, and heads- nothing else.
Thread
Thread Starter
Forum
Replies
Last Post
