70 Cutlass parts

Taz · October 7th, 2007, 12:18 PM

I bought a 70 Cutlass 2dr hardtop for parts that is pretty rusty. It is a complete car with to many good parts to name. It does have a complete set of tinted glass. I have a 69 2dr post so some of the parts won't work for me. If there are parts that anyone needs I'll check the condition and take them off. I can cut out sheet metal panels as well. The car is in Upstate SC. The hood is already taken. Here are some photos.
Thanks

2oldsguy · October 20th, 2007, 05:21 AM

Taz, I could use the two kick panels with the two cables if it is not an A/C car. I also need the jack with the bumper hook and the plastic defroster 'Y' that goes on top of the heater assembly that the two defroster hoses attach to.
Thanks, Joe

344870M · October 20th, 2007, 06:47 AM

How does the washer bottle look?

J-(Chicago) · October 20th, 2007, 08:47 AM

I need the turn signal lever from the column. If you don't end up selling the whole unit.

344870M · October 20th, 2007, 09:31 AM

I need the air in the tires. Is it correct for 1970? Sorry. Couldn't help myself.

I'll probably think of something other than the washer bottle and get back to you.

Pghstarsky · November 17th, 2007, 11:04 AM

Do you have a coolant overflow bottle? Did any cutlass's have them? Cause I dont have one.

November 17th, 2007, 01:54 PM

Another one slated for the crusher =(

marzgpt · November 17th, 2007, 08:13 PM

I'll take the hood tooth and rear view mirror if in good shape.

Taz · November 20th, 2007, 04:28 PM

I'm using the hood complete. Which mirror do you need. The one on the driver's door is good.

h-bomb · November 30th, 2007, 12:50 PM

Correct me if I'm wrong, but I don't believe a '70 hood will fit your '69.

Anyway, what kind of shape is the decklid in? I need it. And the vinyl top moldings.

kevinkpk · November 30th, 2007, 02:27 PM

You still have any of it left? I need a glove box light, and switch, also trunk light and switch assy.

Taz · December 3rd, 2007, 04:30 AM

h-bomb,
I'm not sure about the hood. Side by side they look the same. I think they changed in
71.
The trunk lid only has surface rust on top but in the lower corners underneath there are small holes rusted thru where the rubber bumpstops are. It is still a very usable piece for $40.

70 stick · December 6th, 2007, 06:05 PM

Taz, do you still have the car?? If so, shoot me a PM.

2oldsguy · December 7th, 2007, 05:49 AM

Taz, I could use the two kick panels with the two cables if it is not an A/C car. I also need the jack with the bumper hook and the plastic defroster 'Y' that goes on top of the heater assembly that the two defroster hoses attach to.
Thanks, Joe

Javaman · December 9th, 2007, 01:21 PM

Looking for the Fender Braces for the front fenders and also the Fender Assy's for both fenders. these are the bushings ect that hold the bottom of the fenders to the frame by the doors at the bottom of the fenders.

dallas6778 · December 9th, 2007, 07:30 PM

ill take the mirror and the eyebrow mouldings if their in good shape and if anyone knows if theyll fit my 69. (i think the mirror will but not sure bout the eyebrows.)

88 coupe · December 9th, 2007, 11:06 PM

Quote:

Originally Posted by dallas6778

........ if anyone knows if theyll fit my 69 ........

They won't. '69 and '70 are one year only.

Page 12 of Fusicks Catalog shows them for $42.00 each.

Norm

Javaman · December 18th, 2007, 02:12 PM

Greetings. I am restoring a 1970 olds cutlass and looking for the Fender Braces for the front fenders, (both). Send me a email at info@desertjava.biz if you have them.
thanks
John

johnnybondo · February 12th, 2008, 07:43 AM

i need the trunk stainless trim and the left 1/4 stainless. how much?

Taz · February 13th, 2008, 04:30 AM

Hey guys,
I still have the 70 Cutlass body but when I have had time to look for the parts the weather hasn't been cooperative for being outside. The car is not at my house so that hasn't helped either.

brice · March 30th, 2008, 06:51 PM

i need the heater/ac duct work all or part let me know my email is brice42642@yahoo.com thanks

bowtiecustoms7 · April 3rd, 2008, 10:43 PM

Please call me i need the windshield moldings. rear window moldings and other parts to. so please call me 8287131414

droptopron · April 26th, 2008, 10:02 PM

Quote:

Originally Posted by Pghstarsky

Do you have a coolant overflow bottle? Did any cutlass's have them? Cause I dont have one.

They are rare but they do sell repros. Check with The parts Place $200.

Pghstarsky · April 27th, 2008, 08:00 PM

Forget that, I'll just take one out of a newer Olds. Thanks though.

J-(Chicago) · April 27th, 2008, 10:08 PM

I have a few from 80's delta 88s if you want one.

hamm36 · May 13th, 2008, 08:37 PM

Taz, is any of the wiring any good? I am looking for the dash harnes.

I got wires back in May 08, thanks for not responding.

mb197942 · October 19th, 2008, 07:48 PM

do you still have the headrest if so how muchan will it fit a 72

November 4th, 2008, 08:11 PM

I may be interested in the front bumper core.already looks better than the one I have now.can you get a closer pic or does the drivers side look like it will clean up decent?pm me or just reply here and will watch for a reply.
jack

Taz · December 5th, 2008, 07:47 AM

Here's a link to pics of some of the parts I have off the car. I'll be adding pics as I can so be patient. Like I said, the car is not at my house. I apologize for not responding to requests sooner but I have other projects ongoing plus family, work and just plain getting slower with age.
Thanks

http://s221.photobucket.com/albums/d...tlass%20parts/

kaz442 · December 5th, 2008, 08:33 AM

Was this manual or power steering? If manual I'm interested in the box. Also the horn relay if the horn worked. Thanks JKaz

Taz · December 5th, 2008, 09:03 AM

It has PS. The pump and brackets are available i anyone needs them.

wyteon · December 5th, 2008, 09:17 AM

If you can salvage them I will take them

Taz · December 5th, 2008, 04:08 PM

Sorry, it didn't have a clock but I have the blank where the clock would have been.

If anyone in the southeast needs some of the parts off this Cutlass that would be expensive to ship I might be able to meet you in Pigeon Forge,TN some weekend. I could set you up with a two night stay for free if you would be willing to attend a timeshare presentation. I have done this in the past and it worked out very well. They provide a nice place to stay and usually kick in some other perks like meals or show tickets.

Cameo White · December 6th, 2008, 02:54 PM

Taz,
Check the latch on the hood. I have seen comments on other forums that the 69 and 70 hoods have different latch mechanisms that aren't mixable. Also, the tongue may be shorter on the 69 than on the 70 (if I remember correctly).

Taz · December 7th, 2008, 09:48 PM

The 69 Cutlass sold and the guy didn't want the 70 hood so it's available if anyone needs it. It's in very good condition.

49rebuild · December 8th, 2008, 01:58 PM

do you have a picture of underside of hood? can you deliver to greenville sc area? how much do you want for hood? please discribe any damage or rust on hood.

Taz · December 8th, 2008, 06:19 PM

More pics now @ http://s221.photobucket.com/albums/d...tlass%20parts/

78cutlass · December 27th, 2008, 03:18 AM

is the carb 4-sale?

cardinals25 · March 23rd, 2009, 08:27 PM

do you have a disc brake setup on this car?

cardinals25 · March 23rd, 2009, 08:27 PM

do you have a disc brake setup on this cutlass??

Quote:

Originally Posted by Taz

I bought a 70 Cutlass 2dr hardtop for parts that is pretty rusty. It is a complete car with to many good parts to name. It does have a complete set of tinted glass. I have a 69 2dr post so some of the parts won't work for me. If there are parts that anyone needs I'll check the condition and take them off. I can cut out sheet metal panels as well. The car is in Upstate SC. The hood is already taken. Here are some photos.
Thanks

October 7th, 2007, 12:18 PM	#1 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	70 Cutlass parts I bought a 70 Cutlass 2dr hardtop for parts that is pretty rusty. It is a complete car with to many good parts to name. It does have a complete set of tinted glass. I have a 69 2dr post so some of the parts won't work for me. If there are parts that anyone needs I'll check the condition and take them off. I can cut out sheet metal panels as well. The car is in Upstate SC. The hood is already taken. Here are some photos. Thanks

October 20th, 2007, 06:47 AM	#3 (permalink)
344870M Registered User Join Date: Oct 2007 Location: n/w PA Posts: 185	How does the washer bottle look? __________________ 1970 W-30 4spd, http://www.youtube.com/watch?v=5y_OKnABGJ0 Why is there a "Z" on my data plate & broadcast card!??

October 20th, 2007, 08:47 AM	#4 (permalink)
J-(Chicago) Seasoned beater pilot. Join Date: Jan 2007 Location: Chicago Posts: 2,696	I need the turn signal lever from the column. If you don't end up selling the whole unit. __________________ I'd rather have a numbers matching poker hand.

October 20th, 2007, 09:31 AM	#5 (permalink)
344870M Registered User Join Date: Oct 2007 Location: n/w PA Posts: 185	I need the air in the tires. Is it correct for 1970? Sorry. Couldn't help myself. I'll probably think of something other than the washer bottle and get back to you. __________________ 1970 W-30 4spd, http://www.youtube.com/watch?v=5y_OKnABGJ0 Why is there a "Z" on my data plate & broadcast card!?? Last edited by 344870M; October 20th, 2007 at 09:47 AM.. Reason: gramatical error

December 9th, 2007, 01:21 PM	#15 (permalink)
Javaman Junior Member Join Date: Dec 2007 Posts: 2	1970 Olds Parts Needed Looking for the Fender Braces for the front fenders and also the Fender Assy's for both fenders. these are the bushings ect that hold the bottom of the fenders to the frame by the doors at the bottom of the fenders.

October 20th, 2007, 05:21 AM	#2 (permalink)
2oldsguy Junior Member Join Date: Oct 2007 Location: Staten Island, NY Posts: 7	Taz, I could use the two kick panels with the two cables if it is not an A/C car. I also need the jack with the bumper hook and the plastic defroster 'Y' that goes on top of the heater assembly that the two defroster hoses attach to. Thanks, Joe

November 17th, 2007, 11:04 AM	#6 (permalink)
Pghstarsky Senior Member Join Date: Sep 2007 Location: Pittsburgh Posts: 102	Do you have a coolant overflow bottle? Did any cutlass's have them? Cause I dont have one.

November 17th, 2007, 01:54 PM	#7 (permalink)
dar83501 Guest Posts: n/a	Another one slated for the crusher =(

November 17th, 2007, 08:13 PM	#8 (permalink)
marzgpt Member Join Date: Nov 2007 Location: Berwyn IL Posts: 6	I'll take the hood tooth and rear view mirror if in good shape.

November 20th, 2007, 04:28 PM	#9 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	I'm using the hood complete. Which mirror do you need. The one on the driver's door is good.

November 30th, 2007, 12:50 PM	#10 (permalink)
h-bomb Junior Member Join Date: Nov 2007 Posts: 16	Correct me if I'm wrong, but I don't believe a '70 hood will fit your '69. Anyway, what kind of shape is the decklid in? I need it. And the vinyl top moldings.

November 30th, 2007, 02:27 PM	#11 (permalink)
kevinkpk Senior Member Join Date: Oct 2007 Location: west Posts: 211	You still have any of it left? I need a glove box light, and switch, also trunk light and switch assy.

December 3rd, 2007, 04:30 AM	#12 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	h-bomb, I'm not sure about the hood. Side by side they look the same. I think they changed in 71. The trunk lid only has surface rust on top but in the lower corners underneath there are small holes rusted thru where the rubber bumpstops are. It is still a very usable piece for $40.

December 6th, 2007, 06:05 PM	#13 (permalink)
70 stick Junior Member Join Date: Dec 2007 Posts: 2	Taz, do you still have the car?? If so, shoot me a PM.

December 7th, 2007, 05:49 AM	#14 (permalink)
2oldsguy Junior Member Join Date: Oct 2007 Location: Staten Island, NY Posts: 7	Taz, I could use the two kick panels with the two cables if it is not an A/C car. I also need the jack with the bumper hook and the plastic defroster 'Y' that goes on top of the heater assembly that the two defroster hoses attach to. Thanks, Joe

December 9th, 2007, 07:30 PM	#16 (permalink)
dallas6778 Junior Member Join Date: Jan 2007 Posts: 18	ill take the mirror and the eyebrow mouldings if their in good shape and if anyone knows if theyll fit my 69. (i think the mirror will but not sure bout the eyebrows.) __________________ when you said you drove an oldsmobile, that wasnt what i had in mind...

December 18th, 2007, 02:12 PM	#18 (permalink)
Javaman Junior Member Join Date: Dec 2007 Posts: 2	Parts Greetings. I am restoring a 1970 olds cutlass and looking for the Fender Braces for the front fenders, (both). Send me a email at info@desertjava.biz if you have them. thanks John

February 12th, 2008, 07:43 AM	#19 (permalink)
johnnybondo Junior Member Join Date: Feb 2008 Posts: 22	i need the trunk stainless trim and the left 1/4 stainless. how much?

February 13th, 2008, 04:30 AM	#20 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	Hey guys, I still have the 70 Cutlass body but when I have had time to look for the parts the weather hasn't been cooperative for being outside. The car is not at my house so that hasn't helped either.

March 30th, 2008, 06:51 PM	#21 (permalink)
brice Junior Member Join Date: Mar 2008 Posts: 1	heater/ac duct work i need the heater/ac duct work all or part let me know my email is brice42642@yahoo.com thanks Last edited by brice; March 30th, 2008 at 06:58 PM..

April 3rd, 2008, 10:43 PM	#22 (permalink)
bowtiecustoms7 Junior Member Join Date: Apr 2008 Posts: 1	need parts. i am in NC Please call me i need the windshield moldings. rear window moldings and other parts to. so please call me 8287131414

April 27th, 2008, 08:00 PM	#24 (permalink)
Pghstarsky Senior Member Join Date: Sep 2007 Location: Pittsburgh Posts: 102	Forget that, I'll just take one out of a newer Olds. Thanks though.

April 27th, 2008, 10:08 PM	#25 (permalink)
J-(Chicago) Seasoned beater pilot. Join Date: Jan 2007 Location: Chicago Posts: 2,696	I have a few from 80's delta 88s if you want one. __________________ I'd rather have a numbers matching poker hand.

May 13th, 2008, 08:37 PM	#26 (permalink)
hamm36 Registered User Join Date: May 2008 Location: Dallas Posts: 338	Taz, is any of the wiring any good? I am looking for the dash harnes. I got wires back in May 08, thanks for not responding. Last edited by hamm36; November 5th, 2008 at 08:13 PM.. Reason: add info

October 19th, 2008, 07:48 PM	#27 (permalink)
mb197942 Registered User Join Date: Jul 2008 Posts: 51	do you still have the headrest if so how muchan will it fit a 72

November 4th, 2008, 08:11 PM	#28 (permalink)
meoff Guest Posts: n/a	I may be interested in the front bumper core.already looks better than the one I have now.can you get a closer pic or does the drivers side look like it will clean up decent?pm me or just reply here and will watch for a reply. jack

December 5th, 2008, 07:47 AM	#29 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	Here's a link to pics of some of the parts I have off the car. I'll be adding pics as I can so be patient. Like I said, the car is not at my house. I apologize for not responding to requests sooner but I have other projects ongoing plus family, work and just plain getting slower with age. Thanks http://s221.photobucket.com/albums/d...tlass%20parts/ Last edited by Taz; December 5th, 2008 at 08:34 AM.. Reason: forgot to add link

December 5th, 2008, 08:33 AM	#30 (permalink)
kaz442 Registered User Join Date: Sep 2007 Location: NJ Posts: 176	Was this manual or power steering? If manual I'm interested in the box. Also the horn relay if the horn worked. Thanks JKaz __________________ 72 442 conv. 455 +.060 th400 3.31 12 bolt 70 F85 490 stroker, th400 3.73 Strange S60 87 Buick GN

December 5th, 2008, 09:03 AM	#31 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	It has PS. The pump and brackets are available i anyone needs them.

December 5th, 2008, 09:17 AM	#32 (permalink)
wyteon Registered User Join Date: Oct 2008 Posts: 22	CLOCK AND LAMP WITH WIRING If you can salvage them I will take them

December 5th, 2008, 04:08 PM	#33 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	Clock and Wiring Sorry, it didn't have a clock but I have the blank where the clock would have been. If anyone in the southeast needs some of the parts off this Cutlass that would be expensive to ship I might be able to meet you in Pigeon Forge,TN some weekend. I could set you up with a two night stay for free if you would be willing to attend a timeshare presentation. I have done this in the past and it worked out very well. They provide a nice place to stay and usually kick in some other perks like meals or show tickets. Last edited by Taz; December 5th, 2008 at 04:15 PM..

December 6th, 2008, 02:54 PM	#34 (permalink)
Cameo White Registered User Join Date: Oct 2008 Location: Chicago, IL Posts: 329	Taz, Check the latch on the hood. I have seen comments on other forums that the 69 and 70 hoods have different latch mechanisms that aren't mixable. Also, the tongue may be shorter on the 69 than on the 70 (if I remember correctly). __________________ Current Oldsmobile: 1969 Hurst Olds Other Current Orphans: 2006 Solstice, 2004 Vue Red Line Prior Oldsmobiles: 1994 Cutlass Supreme Convertible, 1975 Cutlass Salon, 1969 442 Convertible

December 7th, 2008, 09:48 PM	#35 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	The 69 Cutlass sold and the guy didn't want the 70 hood so it's available if anyone needs it. It's in very good condition.

December 8th, 2008, 01:58 PM	#36 (permalink)
49rebuild Registered User Join Date: Apr 2008 Posts: 11	70 hood do you have a picture of underside of hood? can you deliver to greenville sc area? how much do you want for hood? please discribe any damage or rust on hood.

December 8th, 2008, 06:19 PM	#37 (permalink)
Taz Registered User Join Date: Aug 2007 Posts: 42	More pics now @ http://s221.photobucket.com/albums/d...tlass%20parts/