Cutlass Depot, partial inventory, mostly 70-72 stuff, but some other years also.
#1
Cutlass Depot, partial inventory, mostly 70-72 stuff, but some other years also.
I've got a lot of '70-'72 parts, see the pictures for some of the stuff. I've gots lots more stuff also & a few cars, a '67 442 shell, 2 '71 4 doors, '72 Supreme rough project, Supreme quarters(repros installed on a shell) vista parts, 4 door parts, some convertible parts, lots of small detail parts.
http://s856.photobucket.com/albums/a...ile%20Uploads/
Also have some '71 skylark & '71 GS parts available, & some G body stuff.
All parts are located in Indianapolis & can be shipped about anywhere or picked up here.
Scott
c. 317-727-7041
Cutlass Depot
http://s856.photobucket.com/albums/a...ile%20Uploads/
Also have some '71 skylark & '71 GS parts available, & some G body stuff.
All parts are located in Indianapolis & can be shipped about anywhere or picked up here.
Scott
c. 317-727-7041
Cutlass Depot
#2
72 Cutlass SUpreme body parts
I am lookiing for a good trunk lid, and driver side fender. Small rust spots okay. Red would be awesome. Thanks, Steve
I've got a lot of '70-'72 parts, see the pictures for some of the stuff. I've gots lots more stuff also & a few cars, a '67 442 shell, 2 '71 4 doors, '72 Supreme rough project, Supreme quarters(repros installed on a shell) vista parts, 4 door parts, some convertible parts, lots of small detail parts.
http://s856.photobucket.com/albums/a...ile%20Uploads/
Also have some '71 skylark & '71 GS parts available, & some G body stuff.
All parts are located in Indianapolis & can be shipped about anywhere or picked up here.
Scott
c. 317-727-7041
Cutlass Depot
http://s856.photobucket.com/albums/a...ile%20Uploads/
Also have some '71 skylark & '71 GS parts available, & some G body stuff.
All parts are located in Indianapolis & can be shipped about anywhere or picked up here.
Scott
c. 317-727-7041
Cutlass Depot
#4
Hey Scott,
Hope all's well, I'm slowly looking around for a hood for my 72 Cutlass 'S'. (was driving the other day and the louvers flew off my current rusted/dented/eyesore hood).
Do you have any hoods? (either louvered or OAI would be great too)
If not, i can definitely wait since the winter is setting in slowly.
Also other small things i'd need. A stone shield for the front end and those headlight housings that the aluminum bezels attach to.
Thanks Scott, let me know what you've got!
Cheers,
Tony
Hope all's well, I'm slowly looking around for a hood for my 72 Cutlass 'S'. (was driving the other day and the louvers flew off my current rusted/dented/eyesore hood).
Do you have any hoods? (either louvered or OAI would be great too)
If not, i can definitely wait since the winter is setting in slowly.
Also other small things i'd need. A stone shield for the front end and those headlight housings that the aluminum bezels attach to.
Thanks Scott, let me know what you've got!
Cheers,
Tony
#5
Tony,
I have plain steel hoods & a few louvered hoods, I'll have to check the conditon & get back to you. I've got one '71-'72 OAI hood. It needs work, but should be an easy fix.
I have a few stone shields in stock as well as the plastic headlight housings. I can get pictures of most of this stuff in a day or three, or give me a call for more info.
Thanks.
Scott
c. 317-727-7041
I have plain steel hoods & a few louvered hoods, I'll have to check the conditon & get back to you. I've got one '71-'72 OAI hood. It needs work, but should be an easy fix.
I have a few stone shields in stock as well as the plastic headlight housings. I can get pictures of most of this stuff in a day or three, or give me a call for more info.
Thanks.
Scott
c. 317-727-7041
#6
Hey Scott,
Pictures would be great, I'm definitely interested in the plastic parts, I guess a hood will depend on how much you think shipping will cost and such, I'll give you a shout later today.
Thanks!
Tony
Pictures would be great, I'm definitely interested in the plastic parts, I guess a hood will depend on how much you think shipping will cost and such, I'll give you a shout later today.
Thanks!
Tony
#7
Hi Scott, looks like you have quite a lot of stock there!
i need '67 quarter windows, '67 upper tail lamps & '67 dash AC vents
i wanted to see how good your '67 driver door window rear channel is. mine has lost all its fur.
how much with shipping to 48316 in Michigan
thanks!
Steve
i need '67 quarter windows, '67 upper tail lamps & '67 dash AC vents
i wanted to see how good your '67 driver door window rear channel is. mine has lost all its fur.
how much with shipping to 48316 in Michigan
thanks!
Steve
#9
Bill,
Here is a link to pictures of the cruise parts I have. Not sure what year it's from, but most of the parts are '70-'72.
No rust free radiator supports right now.
Let me know & thanks.
Scott
c. 317-727-7041
http://s856.photobucket.com/albums/a...ile%20Uploads/
Here is a link to pictures of the cruise parts I have. Not sure what year it's from, but most of the parts are '70-'72.
No rust free radiator supports right now.
Let me know & thanks.
Scott
c. 317-727-7041
http://s856.photobucket.com/albums/a...ile%20Uploads/
#11
Vega,
The '71 skylark is a pretty complete car, no title though. Previous owner said he had it, but it was lost when he moved.
I've got that whole car & a '71 GS shell. You could make a pretty nice one out of the two. No title for the gs either.
Give me a call if you want to come look at them. They are located on the east side of Indy, near the state fairgrounds.
Thanks.
Scott
c. 317-727-7041
The '71 skylark is a pretty complete car, no title though. Previous owner said he had it, but it was lost when he moved.
I've got that whole car & a '71 GS shell. You could make a pretty nice one out of the two. No title for the gs either.
Give me a call if you want to come look at them. They are located on the east side of Indy, near the state fairgrounds.
Thanks.
Scott
c. 317-727-7041
#15
#16
That is a raccoon, the yard with the red 65 442 had 3 of them in the office as pets. They were playing with the yard dogs.
I've got a power seat set up from a bench seat complete with the switch, but I hate to sell just the switch.
I've got a power seat set up from a bench seat complete with the switch, but I hate to sell just the switch.
#18
Hey Scott,
I know i should have probably thought of this before my control arms were shipped out. But how much are a pair of clean hood louvers these days? All the mounting tabs off mine are completely scrap. I was thinking of almost milling a set out of aluminum or something for the time being. I will realistically need the louvers for next spring.
Thanks,
-Tony
I know i should have probably thought of this before my control arms were shipped out. But how much are a pair of clean hood louvers these days? All the mounting tabs off mine are completely scrap. I was thinking of almost milling a set out of aluminum or something for the time being. I will realistically need the louvers for next spring.
Thanks,
-Tony
#21
Hey.
I'm interested in the beauty rings if they are for 15" rallys. I also see a ton of power switches. By any chance do you have any for 80's car? I have Aftermarket switches for my door locks and they suck, the orginals can be rebuilt.
Shipping to 19116?
I'm interested in the beauty rings if they are for 15" rallys. I also see a ton of power switches. By any chance do you have any for 80's car? I have Aftermarket switches for my door locks and they suck, the orginals can be rebuilt.
Shipping to 19116?
#23
Redog,
I'll check on the beauty rings, but I think most of them are the 14" variety. I do have a ton of power window switches, but all of them are for '60s & '70s cars. I haven't started hoarding 80s stuff yet, but maybe it's time.
Bucky,
Allan is a great guy & I appreciate his referral. I have a few drivers doors, but none are real nice. All of them have rust at the rear bottom inside seam, or worse, sorry.
I'll check on the beauty rings, but I think most of them are the 14" variety. I do have a ton of power window switches, but all of them are for '60s & '70s cars. I haven't started hoarding 80s stuff yet, but maybe it's time.
Bucky,
Allan is a great guy & I appreciate his referral. I have a few drivers doors, but none are real nice. All of them have rust at the rear bottom inside seam, or worse, sorry.
#24
And the 80's B Bodies are getting hard to come by here in the Philly area. I had a guy send me a bunch of stuff from a Delta in an Indy Junkyard
#29
Registered User
Join Date: Sep 2013
Location: 25 miles North of Tampa, Land O' Lakes, Florida (Originally from Bethpage, Long Island, NY)
Posts: 332
I'm looking for one set of bucket seat rails if you have any for my 72 Cutlass. I'm convert from bench to bucket seats. Thanks
#30
Koda,
My nicest conv. decklid had the individual OLDSMOBILE holes & all have been bondoed oveer. Not a huge deal. Has extra holes drilled for the 442 emblems, & has a tiny bit of rust under the bottom seam. I don't think he'd want it?
pfergy,
Let me check my seat track selection.
My nicest conv. decklid had the individual OLDSMOBILE holes & all have been bondoed oveer. Not a huge deal. Has extra holes drilled for the 442 emblems, & has a tiny bit of rust under the bottom seam. I don't think he'd want it?
pfergy,
Let me check my seat track selection.
#33
Koda,
My nicest conv. decklid had the individual OLDSMOBILE holes & all have been bondoed oveer. Not a huge deal. Has extra holes drilled for the 442 emblems, & has a tiny bit of rust under the bottom seam. I don't think he'd want it?
pfergy,
Let me check my seat track selection.
My nicest conv. decklid had the individual OLDSMOBILE holes & all have been bondoed oveer. Not a huge deal. Has extra holes drilled for the 442 emblems, & has a tiny bit of rust under the bottom seam. I don't think he'd want it?
pfergy,
Let me check my seat track selection.
#35
Hi Scott, I've bought from you before and I can state the prices are fair and the parts are goo. I'm looking for a stock air cleaner assemble for a 4 bbl cutlass. I saw some pics and they look good. Do you have any and how much are you asking. Shipping would be to Detroit, 48202.
Joe
Joe
#36
redog & John,
Working on your pix tomorrow maybe?
pfergy & 70 cutty,
Working on getting pix of the dash & seat tracks, stay tuned.
Steverw,
Here is a mirror from a '67 I believe? Not junk, but not nice. $20.00 shipped? No chrome lids, sorry.
Carlos,
Pass. fender has a large hole in the bottom, probably not worth messing with. No wheel well molding either, sorry.
Joe,
Here are a few, $65.00 shipped for a nice one?
Working on your pix tomorrow maybe?
pfergy & 70 cutty,
Working on getting pix of the dash & seat tracks, stay tuned.
Steverw,
Here is a mirror from a '67 I believe? Not junk, but not nice. $20.00 shipped? No chrome lids, sorry.
Carlos,
Pass. fender has a large hole in the bottom, probably not worth messing with. No wheel well molding either, sorry.
Joe,
Here are a few, $65.00 shipped for a nice one?
#38
72,
I don't have any nice ones right now, probably best to get a repro.
Redog,
Here are 4 15" trim rings, all of them have curb rash & a ding or two. Not real nice, but better than nothing. Let me know if you are interested.
John,
Here are a couple, missing the horn ring & horn button, but those can be had on ebay or through the aftermarket. Both need a good cleaning, but otherwise no major damage. $115.00 shipped for either one?
Pfergy,
Here are some bucket seat tracks. All need blasted or cleaned up, but no major rust. I have one complete pair & 2 inner tracks. $30.00 each piece or $55.00 for a pair plus shipping.
I don't have any nice ones right now, probably best to get a repro.
Redog,
Here are 4 15" trim rings, all of them have curb rash & a ding or two. Not real nice, but better than nothing. Let me know if you are interested.
John,
Here are a couple, missing the horn ring & horn button, but those can be had on ebay or through the aftermarket. Both need a good cleaning, but otherwise no major damage. $115.00 shipped for either one?
Pfergy,
Here are some bucket seat tracks. All need blasted or cleaned up, but no major rust. I have one complete pair & 2 inner tracks. $30.00 each piece or $55.00 for a pair plus shipping.