lugnutt

http://www.ebay.com/itm/261654905433...84.m1558.l2649


What do you think about this Intake?

1969w3155

http://muskegon.craigslist.org/pts/4791792532.html

ioldsnut

Saw this on CL today and thought it would be worth posting...


http://greenville.craigslist.org/pts/4824561026.html

Octania

Here is the SHORTY SHORT water pump for youse guys looking for one

5.1" length
2.0" inlet

http://www.ebay.com/itm/1965-66-67-O...5f2301&vxp=mtr

Seller : autoparts455

$50 + $28 sh'g

"1965-66-67 OLDSMOBILE WATER PUMP CASTING# 384786 MODELS WITH AC"

"BUYING A CLEAN NOT USED UNTESTED SOLD AS IS FITS ALL MODELS 1965-66-67 OLDSMOBILE WATER PUMP CASTING# 384789 MODELS WITH AC"

Octania

http://decatur.craigslist.org/pts/4812792273.html

oldsmobile 455 - $350 (decatur il)

I have a olds short block out of a 68 toronado needs rebuilt not rusted up or anything and have a set of E cast heads off a 70 olds 455 they also need rebuilt if you want to check it out it's on a engine stand won't respond to emails and I won't ship

"reply" button does not work for me today

plus

"won't respond to emails and I won't ship" = What a PITA

Can somebody get the REPLY at CL to work, and post a phone # or email here so SOMEONE can look into this?

Thanks

1969w3155

"Reply" button worked for me, gave a phone # to call.

Octania

well, REPLY button NW for me
somebody go see if it has a forged crank

manwhile,

here is a cheap TORONADO 425 near Jackson MI

http://jxn.craigslist.org/pts/4828752217.html

1966 Olds 425 complete engine - $400 (HANOVER, mi)
condition: salvage
size / dimensions: 425 cu.inch

I have a 1966 Olds tornado 425 4 barrel with carb engine complete with exhaust manifold. It threw a rod but still ran. Please call.

Russ
517-917-362 Five

barnfind

http://akroncanton.craigslist.org/pts/4820062946.html

1955 Olds Power Steering Box--Used

Will fit GM cars of that era (Chevy, Pontiac, Buick...)
Has been in storage for several years. Should be gone over before installation.

1962olds

61-64 left power window motor
http://www.ebay.com/itm/Chevrolet-Ol...0fd019&vxp=mtr

1962olds

Not mine. Sorry, just noticed the price.

chazz83

look for
1967 Olds Toronado Headlight Vacuum Actuator Gm # 396333

contact me if you have one for sale 662-542-2368 if no answer leave a message

WheelsWA

Not mine, but there is no bidding just buy it now. Only one image posted.http://www.ebay.com/itm/Oldsmobile-6...-/221331934715

erw813

They are selling upper plastic OAI assemblies for $429 and it is a joke. The 70 and other parts numbers are absent.

They spin it as being totally GM legit but it isn't correct!

Funkwagon455

They are licensed GM reproductions.. If you were to buy a modern Delco part for your 1970 GM car, there is a probable likelihood that it would not be identical to the original part. An original OAI lid in new condition would cost much more than the Thornton version.

Octania

mid-MI
Dirt cheap already rebuilt 425
not mine
I have no vested interest
just spreading the word
ad says $1200 or so

https://lansing.craigslist.org/pts/4895343647.html

I got a complete lower end for sale it has new cam bearings pistons arp bolt freeze plugs new oil pan gear 2gear timming chain its all new i have no use for this olds425 its a 66 d block with 455 lifter set up what to know more call txt or Bo

MDchanic

Those are some pretty deep piston dishes.

Not sure how many people want a newly-machined 8:1 425.

- Eric

Octania

http://www.ebay.com/itm/1968-OLDS-44...e85d8a&vxp=mtr

1968 factory CSM Chassis Service Manual and body manual
Most info also good for '69 and even thru 1976 on the engines and such.

THE set to start with if you have a '68 any model and do not have any manuals.

not mine, just passing info

Rocketguy

Pretty crazy JY find

kjr442

Gone by April, wow that is a bunch to move in a short time. Sounds like a forced sell.

R-body_mopar

With the amount of snow we have had this winter, it's going to be almost impossible for anybody to even get in there, let alone load, move, and scrap all those cars and parts......which is what it looks like is going to happen; worth more as scrap than in parts, unless you have lots of time to remove, label, picture, and advertise all those parts that are still useable!

By the way, isn't that a 1960 Caddy 2 dr., NOT a '59? And the other Caddy rear fin looks like an Eldorado, '57-'58.....? Also a 1953 Caddy, and a couple of Buicks, along with the '66 Toronado.....

BUT, all of them look beat!

Octania

shorty 5.1" x 2.0" factory water pump on ebay

http://www.ebay.com/itm/181689225360

get it if you need one

vmathy

W30 POSI Rear End
This is not mine I just saw it on Chicago Craigslist. Someone will want it http://chicago.craigslist.org/wcl/pts/4943527325.html

Funkwagon455

I wish this were the earlier version......TX C/L

http://dallas.craigslist.org/ndf/pts/4932722961.html

Octania

http://www.ebay.com/itm/1968-1972-Ol...item2a4ecec13b

Vista Cruiser roof rack, that is

MDchanic

Hubba hubba.

- Eric

Sampson

Looks like a good opportunity to own one of these super rare engines.


http://raleigh.craigslist.org/pts/4968782346.html

MDchanic

Is there one piece of information in this ad that's accurate?

- Eric

Sampson

In need of a nice 4 barrel carburetor.

This part is probably accurate!

Indy_68_S

Looks like usable glass, trim, lugg. rack....& cheap


https://indianapolis.craigslist.org/cto/4990206282.html

Body and Interior Fair Condition
No Broken Glass!!! Hard to find curved glass.
No Engine but does have Transmission
Doghouse fits Cutlass 442
$1000 Solid

Cutlass Supreme SX

1970 Cutlass Supreme Convertible $1200. it does have the front end and ialso the car was stuffed full of parts still have to sort them not sure it is all for this car. I know the seats are wrong so I pulled them out

MDchanic

Holy crap! It's got a floor!

Good deal!

- Eric

Cutlass Supreme SX

it is an Florida car and has one hole in the floor about as big as a quarter but nothing else. But it has no interior, Engine or trans but it is a good start

tpvigens

I need one Side Marker Bezels For Quarter Panel for my 1968 Cutlass S

tpvigens

Im also looking to sell my car... where is the best place to list? It's a 1968 Cutlass S. Matching Eng/Tran/Rear End. Really good shape and runs great.. I just bought a new ride.. hate to see this car go but have 2

Cutlass Supreme SX

http://tricities.craigslist.org/cto/5001514017.html


$2000 in TN

1962olds

61-64 full size ,used gas tan on eBay ,except wagon
http://www.ebay.com/itm/181735267422...id%3D0&vxp=mtr

1969w3155

Start with the classifieds here, craigslist, your local auto trading mag., 442.com. etc.

tpvigens

m371961

Not mine. Interesting way to advertise all parts on E-Bay. Not seen this before. Read fine print at description.http://www.ebay.com/itm/171781246351...witem=&vxp=mtr

MDchanic

I've seen it. It's just a way of subverting eBay's rules and taking advantage of their wide reach, while not having to pay them for it.

- Eric