1964-77 Olds parts for sale - Page 15

LMHConcepts · August 12th, 2009, 01:17 AM

I need the passenger door off a 1971 Supreme (2 Door Model), a drivers side fender, and a front windshield.

Email me at lee at LMHConcepts.com with the pricing, information, and pics.

2blu442 · August 12th, 2009, 07:19 PM

Hello LMHConcepts
I've got those items but shipping very far would be expensive. Please post your location. John

jimjr · August 13th, 2009, 06:33 PM

John- Any luck with the kick-down switch? I responded to your PM, but I'm not sure I sent it correctly. I am interested in giving it a try here. Thanks! Jim

2blu442 · August 13th, 2009, 07:27 PM

Hello Jim
Work's been more hectic than normal, which has been pretty bad this summer! I'll try to get it shipped this weekend and send you a note when it's on it's way. John

DarrylJ · August 14th, 2009, 05:39 AM

Hi John, did you happen to have a chance to look for those pull straps for my 71 Supreme? Thanks again!

FTW65W29 · August 15th, 2009, 01:21 AM

Quote:

Originally Posted by 2blu442

I checked the core support panel on one parts car and it's rusty under the battery box. I'll try to check the other parts car soon. John

Thanks for looking. Keep me posted.

Snowdog · August 15th, 2009, 07:31 AM

I could use a drivers side valve cover for a '65 330
with a hole for a PCV. Can you help me out?

2blu442 · August 15th, 2009, 05:43 PM

Jim, kickdown switch is on it's way.

Darryl, I pulled a set of sienna ones but discovered one of them is coming unglued. Check out the photos at the bottom and tell me what you think.

Snowdog, I've got a lot of valve covers, I'll dig around this weekend to see if I have one with the pvc hole that matches the 1965 with no hole.

Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts?

Charlie, I'm working on your list.

FTW65W29 I'll try to get to the other parts car today.

wazoo, I haven't heard back from you. Will any of the parts I posted help you?

64 Cutlass · August 15th, 2009, 07:13 PM

"Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts? "

John- That sound good to me, I'm going to completely rebuild it anyway! (New padding and ReCover Seats) We can ship it to my work if need be?-Thanks Dan

2blu442 · August 15th, 2009, 07:28 PM

Dan, yes a business address will also save $$. Please send me a PM with the shipping address and I'll try to get you a shipping quote tomorrow afternoon.
John

DarrylJ · August 16th, 2009, 07:16 PM

Quote:

Originally Posted by 2blu442

Jim, kickdown switch is on it's way.

Darryl, I pulled a set of sienna ones but discovered one of them is coming unglued. Check out the photos at the bottom and tell me what you think.

Snowdog, I've got a lot of valve covers, I'll dig around this weekend to see if I have one with the pvc hole that matches the 1965 with no hole.

Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts?

Charlie, I'm working on your list.

FTW65W29 I'll try to get to the other parts car today.

wazoo, I haven't heard back from you. Will any of the parts I posted help you?

They look like they will work, how much do you need for them?

2blu442 · August 16th, 2009, 08:33 PM

Darryl, if they will work for you how about $10 plus shipping? Please send me a Private Message with your address and I'll come up with shipping costs. John

wazoo · August 17th, 2009, 09:17 AM

John

Sorry for the lapse. I found an umblemished radio so I'm set there. I still need the '75 left side dash piece if you can find it. If not, I take the '77 one you showed in pix. The difference is in the placement of the clock in those years. Let me know. I sure do appreciate it.

harleyrules · August 17th, 2009, 02:45 PM

Looking for the alternator mounting brackets for a 64 Cutlass 330 mounting for passenger side of motor.

ctrain22 · August 17th, 2009, 10:24 PM

John,

Any word on my list??

Thanks

Charlie

2blu442 · August 18th, 2009, 10:24 PM

Wazoo, I'll keep looking for the correct 1975 piece.

harleyrules, I may have a late 1960's passengerside mount. I believe it would fit and function, but would not look like the one used in 1964. So let me know if your looking for one that looks correct for that year or just one that will work on the passengerside.

Charlie, the items I'm striking out on are the 1968 choke coil (one year only I believe) and the AC hoses. I believe I have everything else and will try to get some photos for you in the next couple evenings.

John

2blu442 · August 18th, 2009, 10:27 PM

Snowdog, I do have the valve cover you need. I'll try to get photos of it for you in the next couple evenings.

Dan, it may be the weekend before I can get the seats stripped down to the frames and boxed up to ship.

Darryl, I'll try to get the straps in a box the next couple nights after work.

Thanks for being patient with me guys... I enjoy my job but right now I'm getting a little too much of a good thing

harleyrules · August 19th, 2009, 10:27 PM

John,
Can you post a picture of the one you are talking about? I found the top bracket need the bottom bracket now.
Thanks,
Rich

ctrain22 · August 19th, 2009, 11:56 PM

John,

Just let me know what you have and we'll go from there. Want to get htis motor in soon.

Thanks

Charlie

2blu442 · August 20th, 2009, 06:55 AM

Rich, I'll get a photo for you this weekend.

Charlie, I'll pull those items together on Saturday.

John

wazoo · August 20th, 2009, 07:23 AM

John,

Do you have a photographic memory? You sure do sound like it. wazoo

2blu442 · August 20th, 2009, 01:42 PM

I am into photos, love that digital camera

German442 · August 21st, 2009, 12:10 AM

Hi!
Remember me? I'm the guy looking for the rear panel!

Ralph

2blu442 · August 21st, 2009, 11:27 AM

Sorry Ralph, I took these pictures a couple weeks ago but didn't get them posted. I think these are the body seams you are talking about, then a cut across the top just under the tail lights from side to side. Does this look correct to you? I'm thinking you don't need the portions where the frame mounts attach, or the section where the tail lights are. John

rumblewagen · August 21st, 2009, 11:54 AM

Do you have a rust free lower windshield section for a 1972 Cutlass? Don't need alot of it maybe a 15" section right in the middle.

The damage

The car.

2blu442 · August 21st, 2009, 12:09 PM

Welcome to the site rumblewagen! I probably do, but since your spot is so small I've heard of people just taking a piece of sheetmetal off a door or hood, then bending it to the right shape and welding it on. John

P.S. 455, 6 speed, 3.73 posi, sounds like a fun car to drive!!!

rumblewagen · August 21st, 2009, 12:37 PM

Yeah, the hand fabricated route has been considered, even though the rust area is small it has gone all three directions in the area where the firewall meets.

Lets just say it can be a hand full

2blu442 · August 21st, 2009, 12:56 PM

OK, rumblewagen I'll poke around this weekend and see what I have. John

smoke · August 21st, 2009, 01:36 PM

do you have a trunk lid for 72 cutlass conv

2blu442 · August 21st, 2009, 02:12 PM

smoke, I have one that isn't rusty but the lock has been punched. I may have another one but I'll have to dig around and see. Also, if you didn't know the 4 door Cutlass from 1970-72 used the same deck or trunk lid.
John

marzgtp1 · August 21st, 2009, 02:56 PM

Please, don't forget about me John.

wj67442 · August 21st, 2009, 05:01 PM

i am checking to see if you have the trunk molding that says " OLDSMOBILE " and headlight bezels ( without notch ) for a 1967 442 Thanks !!!!

Wayne

Bobsw32 · August 21st, 2009, 07:22 PM

Jon

I am looking for the stud and washer and nut and bracket for the TCS switch off the intake manifold of a 1970 Cutlass .

I am also looking for the bolts off the front fender liner that have the big flat washers on them.... I could use six of them if you have them

scott_442 · August 21st, 2009, 07:48 PM

Hey John

I need a set of stock valve covers for a 72 455 and the heater hose bracket that attaches to the ac bracket. Can you help?

2blu442 · August 22nd, 2009, 06:05 PM

PM's or email sent to:

BerBer
1964 Cutlass
Ctrain
69'442
Snowdog
Harlyrules
Smoke
Darrylj

I'm trying to send photos through an email or PM so that this thread isn't taking up too much space with photos

FWT65W29
Wazoo
rumblewagen
marzgtp1

I'll try to get photos for you guys soon

wj67442, sorry I don't have the items you need. I believe there are people on this site who do and suggest you look through the parts for sale in the last 12 months and/or post a parts wanted ad for them to reply to.

Bobsw32, I guess I'm confused, I thought the TCS valve was the tree with the multiple vacuum ports on it. Can you describe the item you need and where it's attached to the intake? I do have the fenderwell bolts.

scott_442, the stock valve covers would have been the notched ones. They're scarce and more spendy than others. Are those the covers your looking for? I should have the hose bracket but will have to look around.

John

ctrain22 · August 22nd, 2009, 06:39 PM

John,

Got the PM and sent one back at ya.

Thanks

Charlie

scott_442 · August 22nd, 2009, 09:03 PM

whatever you have that will fit...don't have to be notched. Where/why were they notched anyway?

2blu442 · August 22nd, 2009, 10:28 PM

Scott, the valve covers had a sloped corner so that you can remove it without loosening the brake booster on the driver side, and to clear the AC condensor on the passengerside. So other covers will fit, but be a problem to remove. John

rumblewagen · August 22nd, 2009, 10:38 PM

Quote:

Originally Posted by 2blu442

I'm trying to send photos through an email or PM so that this thread isn't taking up too much space with photos

FWT65W29
Wazoo
rumblewagen
marzgtp1

I'll try to get photos for you guys soon

John

Good Deal, if you need any info shoot me an E-mail. Damn phones attached at the hip, might as well put it to good use.

Allen

wj67442 · August 23rd, 2009, 06:02 AM

John Thanks alot for the help and reply !!!!!!!!

Wayne

August 12th, 2009, 07:19 PM	#562 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Hello LMHConcepts I've got those items but shipping very far would be expensive. Please post your location. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 13th, 2009, 07:27 PM	#564 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Hello Jim Work's been more hectic than normal, which has been pretty bad this summer! I'll try to get it shipped this weekend and send you a note when it's on it's way. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 14th, 2009, 05:39 AM	#565 (permalink)
DarrylJ Registered User Join Date: May 2008 Posts: 30	Hi John, did you happen to have a chance to look for those pull straps for my 71 Supreme? Thanks again! __________________ 1970 Cutlass Supreme conv 455 1971 Cutlass Supreme hardtop 350 1989 Chevy Blazer K1500 1997 GMC Suburban K2500 Vortec 454 1999 Ford Mustang SVT Cobra Conv 4.6 32 valve 1997 Sunnybrook 29DBS travel trailer 2003 Ski Doo REV 600HO 2005 Ski Doo REV 600HO SDI

August 15th, 2009, 05:43 PM	#568 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Jim, kickdown switch is on it's way. Darryl, I pulled a set of sienna ones but discovered one of them is coming unglued. Check out the photos at the bottom and tell me what you think. Snowdog, I've got a lot of valve covers, I'll dig around this weekend to see if I have one with the pvc hole that matches the 1965 with no hole. Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts? Charlie, I'm working on your list. FTW65W29 I'll try to get to the other parts car today. wazoo, I haven't heard back from you. Will any of the parts I posted help you? __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Chevy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished! Last edited by 2blu442; August 15th, 2009 at 05:52 PM..*

August 15th, 2009, 07:28 PM	#570 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	1964 Rear Seat Dan, yes a business address will also save $$. Please send me a PM with the shipping address and I'll try to get you a shipping quote tomorrow afternoon. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 12th, 2009, 01:17 AM	#561 (permalink)
LMHConcepts Registered User Join Date: Dec 2007 Posts: 22	I need the passenger door off a 1971 Supreme (2 Door Model), a drivers side fender, and a front windshield. Email me at lee at LMHConcepts.com with the pricing, information, and pics.

August 13th, 2009, 06:33 PM	#563 (permalink)
jimjr Registered User Join Date: Apr 2009 Posts: 48	John- Any luck with the kick-down switch? I responded to your PM, but I'm not sure I sent it correctly. I am interested in giving it a try here. Thanks! Jim

August 15th, 2009, 07:31 AM	#567 (permalink)
Snowdog Registered User Join Date: Mar 2009 Location: Willow Springs, IL Posts: 69	I could use a drivers side valve cover for a '65 330 with a hole for a PCV. Can you help me out?

August 15th, 2009, 07:13 PM	#569 (permalink)
64 Cutlass Registered User Join Date: Jul 2009 Location: TEXAS Posts: 38	*"Dan, I was looking at the seats today. If I were to strip the covers, padding, etc and ship only the springs and frames it would bring the shipping down quite a bit. Whats your thoughts? "* John- That sound good to me, I'm going to completely rebuild it anyway! (New padding and ReCover Seats) We can ship it to my work if need be?-Thanks Dan

August 16th, 2009, 08:33 PM	#572 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Darryl, if they will work for you how about $10 plus shipping? Please send me a Private Message with your address and I'll come up with shipping costs. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 17th, 2009, 09:17 AM	#573 (permalink)
wazoo Registered User Join Date: Jun 2009 Location: Outside of Charleston, SC Posts: 38	parts John Sorry for the lapse. I found an umblemished radio so I'm set there. I still need the '75 left side dash piece if you can find it. If not, I take the '77 one you showed in pix. The difference is in the placement of the clock in those years. Let me know. I sure do appreciate it.

August 17th, 2009, 02:45 PM	#574 (permalink)
harleyrules Registered User Join Date: Oct 2007 Posts: 41	Looking for the alternator mounting brackets for a 64 Cutlass 330 mounting for passenger side of motor.

August 17th, 2009, 10:24 PM	#575 (permalink)
ctrain22 Registered User Join Date: Oct 2008 Location: Ventura, CA Posts: 141	John, Any word on my list?? Thanks Charlie __________________ 68 442 Convertible

August 18th, 2009, 10:24 PM	#576 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Wazoo, I'll keep looking for the correct 1975 piece. harleyrules, I may have a late 1960's passengerside mount. I believe it would fit and function, but would not look like the one used in 1964. So let me know if your looking for one that looks correct for that year or just one that will work on the passengerside. Charlie, the items I'm striking out on are the 1968 choke coil (one year only I believe) and the AC hoses. I believe I have everything else and will try to get some photos for you in the next couple evenings. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 18th, 2009, 10:27 PM	#577 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Snowdog, I do have the valve cover you need. I'll try to get photos of it for you in the next couple evenings. Dan, it may be the weekend before I can get the seats stripped down to the frames and boxed up to ship. Darryl, I'll try to get the straps in a box the next couple nights after work. Thanks for being patient with me guys... I enjoy my job but right now I'm getting a little too much of a good thing __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 19th, 2009, 10:27 PM	#578 (permalink)
harleyrules Registered User Join Date: Oct 2007 Posts: 41	John, Can you post a picture of the one you are talking about? I found the top bracket need the bottom bracket now. Thanks, Rich

August 19th, 2009, 11:56 PM	#579 (permalink)
ctrain22 Registered User Join Date: Oct 2008 Location: Ventura, CA Posts: 141	John, Just let me know what you have and we'll go from there. Want to get htis motor in soon. Thanks Charlie __________________ 68 442 Convertible

August 20th, 2009, 06:55 AM	#580 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Rich, I'll get a photo for you this weekend. Charlie, I'll pull those items together on Saturday. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 20th, 2009, 07:23 AM	#581 (permalink)
wazoo Registered User Join Date: Jun 2009 Location: Outside of Charleston, SC Posts: 38	Memory John, Do you have a photographic memory? You sure do sound like it. wazoo

August 20th, 2009, 01:42 PM	#582 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	I am into photos, love that digital camera __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 21st, 2009, 12:10 AM	#583 (permalink)
German442 Registered User Join Date: Jun 2009 Posts: 176	Hi! Remember me? I'm the guy looking for the rear panel! Ralph

August 21st, 2009, 11:27 AM	#584 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	1965 Rear Body Panel Sorry Ralph, I took these pictures a couple weeks ago but didn't get them posted. I think these are the body seams you are talking about, then a cut across the top just under the tail lights from side to side. Does this look correct to you? I'm thinking you don't need the portions where the frame mounts attach, or the section where the tail lights are. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 21st, 2009, 11:54 AM	#585 (permalink)
rumblewagen Registered User Join Date: Dec 2007 Location: Fort Worth, TX Posts: 11	Do you have a rust free lower windshield section for a 1972 Cutlass? Don't need alot of it maybe a 15" section right in the middle. The damage The car. __________________ 1972 Cutlass S 455 w/T-56 6-speed 3.73 posi rear

August 21st, 2009, 12:09 PM	#586 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Welcome to the site rumblewagen! I probably do, but since your spot is so small I've heard of people just taking a piece of sheetmetal off a door or hood, then bending it to the right shape and welding it on. John P.S. 455, 6 speed, 3.73 posi, sounds like a fun car to drive!!! __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 21st, 2009, 12:37 PM	#587 (permalink)
rumblewagen Registered User Join Date: Dec 2007 Location: Fort Worth, TX Posts: 11	Yeah, the hand fabricated route has been considered, even though the rust area is small it has gone all three directions in the area where the firewall meets. Lets just say it can be a hand full __________________ 1972 Cutlass S 455 w/T-56 6-speed 3.73 posi rear

August 21st, 2009, 12:56 PM	#588 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	OK, rumblewagen I'll poke around this weekend and see what I have. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 21st, 2009, 01:36 PM	#589 (permalink)
smoke Registered User Join Date: Aug 2009 Posts: 2	72 cutlass conv do you have a trunk lid for 72 cutlass conv

August 21st, 2009, 02:12 PM	#590 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	smoke, I have one that isn't rusty but the lock has been punched. I may have another one but I'll have to dig around and see. Also, if you didn't know the 4 door Cutlass from 1970-72 used the same deck or trunk lid. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 21st, 2009, 02:56 PM	#591 (permalink)
marzgtp1 Registered User Join Date: Feb 2008 Posts: 48	Please, don't forget about me John.

August 21st, 2009, 05:01 PM	#592 (permalink)
wj67442 Registered User Join Date: Jan 2007 Posts: 44	i am checking to see if you have the trunk molding that says " OLDSMOBILE " and headlight bezels ( without notch ) for a 1967 442 Thanks !!!! Wayne

August 21st, 2009, 07:22 PM	#593 (permalink)
Bobsw32 Registered User Join Date: Feb 2009 Posts: 119	1970 Olds Cutlass parts Jon I am looking for the stud and washer and nut and bracket for the TCS switch off the intake manifold of a 1970 Cutlass . I am also looking for the bolts off the front fender liner that have the big flat washers on them.... I could use six of them if you have them

August 21st, 2009, 07:48 PM	#594 (permalink)
scott_442 Registered User Join Date: Dec 2007 Location: Raleigh, NC Posts: 115	Parts needed for 72 Cutlass - 455 Hey John I need a set of stock valve covers for a 72 455 and the heater hose bracket that attaches to the ac bracket. Can you help?

August 22nd, 2009, 06:05 PM	#595 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	Parts, parts and more parts! PM's or email sent to: BerBer 1964 Cutlass Ctrain 69'442 Snowdog Harlyrules Smoke Darrylj I'm trying to send photos through an email or PM so that this thread isn't taking up too much space with photos FWT65W29 Wazoo rumblewagen marzgtp1 I'll try to get photos for you guys soon wj67442, sorry I don't have the items you need. I believe there are people on this site who do and suggest you look through the parts for sale in the last 12 months and/or post a parts wanted ad for them to reply to. Bobsw32, I guess I'm confused, I thought the TCS valve was the tree with the multiple vacuum ports on it. Can you describe the item you need and where it's attached to the intake? I do have the fenderwell bolts. scott_442, the stock valve covers would have been the notched ones. They're scarce and more spendy than others. Are those the covers your looking for? I should have the hose bracket but will have to look around. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

August 22nd, 2009, 06:39 PM	#596 (permalink)
ctrain22 Registered User Join Date: Oct 2008 Location: Ventura, CA Posts: 141	John, Got the PM and sent one back at ya. Thanks Charlie __________________ 68 442 Convertible

August 22nd, 2009, 09:03 PM	#597 (permalink)
scott_442 Registered User Join Date: Dec 2007 Location: Raleigh, NC Posts: 115	455 Valve covers whatever you have that will fit...don't have to be notched. Where/why were they notched anyway?