1968 Delta 88 parts for sale
November 30th, 2006, 07:52 PM
#1
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
1968 Delta 88 parts for sale
I've got two 1968 88's I'm parting out right now, one is a Delta 88 the other is a Delta Custom. Both have 455's and lots of good parts. I've also got a collection of 1964-77 Cutlass parts that I need to thin down. I'm located in Medford Oregon if any of you west coasters are close enough to stop by your welcome to check out the clutter, I mean treasure! Otherwise respond to this message or email me at jmcneel@msn.com
November 30th, 2006, 08:14 PM
#4
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Hi Bill, I believe I've got the side marker lights and a 1970 hood. Not the scooped hood but one that has the two metal grills by the windshield, looks just like the 1969 442 hood but has the correct latch for the 1970. I'll dig out the sidemarkers to photograph them. Let me know if you'd like to see photos of the hood too. John
December 4th, 2006, 09:29 PM
#8
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Hi Bill
This weekend got away from me, as usual I tried to do too many things! I do have a photo of the top of the hood on my photobucket site. The address is: http://s90.photobucket.com/albums/k257/2blu442/ The paint is cracked and flaking, but I don't think there is any dents or damage to the metal. I'm pretty sure I have the sidemarker lights, and I may have a complete jack assembly, I'll have to dig around. Let me know if you have any trouble accessing the photobucket site. John
This weekend got away from me, as usual I tried to do too many things! I do have a photo of the top of the hood on my photobucket site. The address is: http://s90.photobucket.com/albums/k257/2blu442/ The paint is cracked and flaking, but I don't think there is any dents or damage to the metal. I'm pretty sure I have the sidemarker lights, and I may have a complete jack assembly, I'll have to dig around. Let me know if you have any trouble accessing the photobucket site. John
December 5th, 2006, 06:44 PM
#11
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Cars and Parts
Hi Bill
For the 1970 hood $75 without the hood tounge or chrome hockey sticks. The 1977 442 is a project car, no engine or trannie but I believe everything else is there. It was an automatic transmission car, bucket seats, factory sway bars. The white car is a 1975 Cutlass parts car that has black swivel buckets, console, tilt floor shift column. Then not in the photos is a 1974 Cutlass/442 clone. It's a Cutlass with the 442 hood and emblems, complete car. The white car is suppose to have a good running engine. I bought these as a package deal, they've been sitting for several years. I haven't washed the lichens off them yet as I have them in a storage facility, but I don't think rust is a problem. I've got extra engines and trannies, if your looking for a project car I could set you up with most of what you'd need. Are you close enough to come check them out? I've also got a 1977 Delta 88Indy Pace Car for sale, and a couple other project cars from 1964-72 vintage. John
For the 1970 hood $75 without the hood tounge or chrome hockey sticks. The 1977 442 is a project car, no engine or trannie but I believe everything else is there. It was an automatic transmission car, bucket seats, factory sway bars. The white car is a 1975 Cutlass parts car that has black swivel buckets, console, tilt floor shift column. Then not in the photos is a 1974 Cutlass/442 clone. It's a Cutlass with the 442 hood and emblems, complete car. The white car is suppose to have a good running engine. I bought these as a package deal, they've been sitting for several years. I haven't washed the lichens off them yet as I have them in a storage facility, but I don't think rust is a problem. I've got extra engines and trannies, if your looking for a project car I could set you up with most of what you'd need. Are you close enough to come check them out? I've also got a 1977 Delta 88Indy Pace Car for sale, and a couple other project cars from 1964-72 vintage. John
December 5th, 2006, 07:27 PM
#12
Registered User
Join Date: Nov 2006
Posts: 15
john, i live in vermont. my brotherinlaw lives in roseburg. can you take some close-ups of the body panels, rockerpanels, interior( front and rear)and engine compartment? what are you looking to get for it? thanks,bill,
December 5th, 2006, 07:35 PM
#14
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
It will probably be the weekend before I can get over there in the daylight and snap some pictures. I'll send a message to let you know they're posted on the photobucket site. If you were able to move it before the first of Jan. so I didn't have to pay more storage on it, I would take $600 for it. John
December 6th, 2006, 05:11 PM
#16
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Hi Bill, I have titles for the 442 and 442 clone, but not the white parts car. I would take $1500 for all three including a new set of swivel bucket seat covers, black in color to recover the seats in the white car. I'll try to get those photos this weekend. John
December 7th, 2006, 09:49 PM
#18
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Project Cars
Hi Bill
Please check out the photos posted on my photobucket site.
http://s90.photobucket.com/albums/k257/2blu442/
John
Please check out the photos posted on my photobucket site.
http://s90.photobucket.com/albums/k257/2blu442/
John
December 8th, 2006, 06:02 AM
#21
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
1972
It's a driver, but has a reconstructed title. The drivers side quarter panel has rips in it, looks almost like it was cut with a can opener! Some damage to the door, but nothing like the quarter panel. Then the right front fender, hood and stone shield have a different color underneath. The nice part is there is no rust in the usual places. There is some surface rust under the vinyl top, but the lower fenders and quarter panels are clean. Drives nice, so I don't think there is any frame damage, my guess is that maybe in the 1980's it had enough damage to be considered a total by the insurance company. Radio cut out of the dash, but I have the glove box door, I may have another dash in the rafters of the garage. I put the 1971 Supreme grills in it, a 2.78 posi, performer intake and Holly Avenger carb. Brakes re-done last summer, power disc added to front, 1 1/4" sway bar put in front and aftermarket sway bar added to rear. 350 engine, TH350 trannie, SSII wheels, tires are almost new. I have a new set of seat covers to convert it over to bucket seats. Price somewhere around $2750, can negotiate up or down for the seat covers, dash, wheels and tires, etc. Great potential, but again I have too many projects. Johnn
December 9th, 2006, 09:24 AM
#22
Registered User
Join Date: Nov 2006
Posts: 15
well its not fair to hve you pay storage while i make payments to you and pick up cars in june. i don't know what your storage fees are but it just doesn't make sense as you have probably concluded. i e-mailed my brother -in-law this morning and hes not budging from his position. sorry deal went south, but you will have a sale this june. if you could- e-mail your address/ phone # so we can hook up in june. i'm sure i'll find a project or two from you in june. sincerely, bill.
April 25th, 2008, 12:01 PM
#29
Registered User
Join Date: Oct 2006
Location: New Bremen Ohio
Posts: 221
hey john,, on the delta 88 does it have the oldsmobile letters on the hood and truck lid? if so what kind of shape are the in and how much? do you know if they would fit a 65 olds dynamic 88? also does the delta have the vent windows on front drivers and passengers side? what kind of condition is the chrome if it does? thanks chris
April 27th, 2008, 09:21 PM
#30
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
1968 Delta 88 and Delta Custom
Sorry Guys, I haven't checked this post in a while. I guess after a specific length of time we stop getting emails of posts. I have a few items left, but it got to the point where I needed the room so the hulks went away. The items I know I still have are:
Rear fender extensions
Trunk or deck lid
Power window setup
Door panels for power windows
Speedometer cable
Engines/transmissions
Black Dash and instrument panel
Bucket seat brackets and seat rails
Tail lights
Wiring harness
Delta Custom emblems
Probably a few other things, but that's what comes to mind. John
Rear fender extensions
Trunk or deck lid
Power window setup
Door panels for power windows
Speedometer cable
Engines/transmissions
Black Dash and instrument panel
Bucket seat brackets and seat rails
Tail lights
Wiring harness
Delta Custom emblems
Probably a few other things, but that's what comes to mind. John
April 28th, 2008, 06:47 AM
#32
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
Olds 88 Dash
Hi Chris, it will be a couple days before I can get some photos for you. As I remember the chrome is in pretty good shape and it has the wood grain applique over the top of it. John
April 28th, 2008, 06:03 PM
#34
Registered User
Join Date: Oct 2006
Location: New Bremen Ohio
Posts: 221
not a problem, when you get time. do you know if the front drivers and passenger wing windows in this are the same for a 65 dynamic 88? my email is cnmck@nktelco.net. might be easier to send them there. ive boughten from you in the past. thanks chris
May 3rd, 2008, 08:04 PM
#36
Moderator
Thread Starter
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,684
4door88 I've got some steering wheels but even the best one has some cracks in it. I've heard the repair kits are pretty good, do you have one with just some cracks or is yours falling apart?
Chris, I too some photos this afternoon. I'll try to email them to you either later tonight or Sunday afternoon.
Dan, do you know if the one you need is the flattened out mast or a round one? The only power ones I have are round. I have one from a 1966 Toro, a 1966 Riviera and one I believe came from a 1969 Electra. The 1969 was mounted in the rear fender, the others were up front. John
Chris, I too some photos this afternoon. I'll try to email them to you either later tonight or Sunday afternoon.
Dan, do you know if the one you need is the flattened out mast or a round one? The only power ones I have are round. I have one from a 1966 Toro, a 1966 Riviera and one I believe came from a 1969 Electra. The 1969 was mounted in the rear fender, the others were up front. John
May 8th, 2008, 11:17 AM
#37
Registered User
Join Date: Oct 2006
Location: New Bremen Ohio
Posts: 221
john, i never got the pictures. i dont know if you had time to send them or if they went somewhere else. in ref to the dash and dash chrome. also the window vents on the drivers and passengers side front. thanks chris.
