Almond900

Olds 455 block. 396021Fa. 34mxxxxxx. Std bore with around 74,xxx miles $200
Cloyes double roller timing chain set. 300ish miles $50
Double roller timing chain set, unknown manufacturer. Under 2000 miles $40
2 oil pumps, both standard pressure, 1 melling, the other I was told is trw but j don't know for sure. Melling has 300ish miles, trw had 2000ish miles . $40 each
Heads off running 455, I believe J heads, can't find a letter on them. $200/pair
455 crank, never cut before, will need to be cleaned up. #6 rod bearing failed. $150
Camshaft that came in a motor i bought, don't know make or spec, last owner said good torque, faintly hear the cam at idle $50
Std bore pistons, deep dish lower compression. $150/set
Cast iron 4bbl egr intake. $50
Passenger side exhaust manifold capped off for dual exhaust $40
Harmonic balancer, will probably need sleeve $40
Distributor with pertronix point eliminator, pertronix 40,000 volt flame thrower coil, new cap, new rotor, new vacuum advance can and new plug wires. Only used 300ish miles $140
1971-1972 cutlass hood with chrome louvers, hood is perfect, rust free, dent free, minor pits on chrome louvers, underside is perfect by mounting holes. No windshield or grill trim $200.
Block and crank will be removed from car this week, everything else is ready to go now
All prices are obo! texting would be best for pics, takes forever to download pics of everything. 920-517-6093

Almond900

I would also be willing to meet someplace withing reason, as I know most of this it to heavy to ship, and if somebody wants everything I'd be happy to let everything go for a very reasonable price

Almond900

Both timing chain and sprockets sold
Both oil pumps sold
Crank is pending payment
Open to offers on the other parts

Tony72Cutlass'S'

Any chance the hood is bamboo yellow? I've got a hood but she's slowly rusting on the underside, so i'm toying between going big with a thortons or sticking with standard.

Thanks!

Also, only problem is i am up in Canada..

Almond900

The hood is actually paint code 57, or ppg wa4266, barouqe gold. It is in perfect condition, the bottom is a good as the top. I can hope get it to a shipper if that helps, if you could make the arrangements.

Almond900

I mean help get it to a shipper not hope. Damn auto spell on the phone

Tony72Cutlass'S'

Cool! Let me look into it I'll get back to you

Cheers,

Tony

Almond900

No problem, and if you find a shipper within 80 miles of fond du lac, wi 54935 I can get it there if that helps

code26

Try fastenal I have used them with great results

joe68h/o

What kind of pertronix kit is it? The lobe sensor or igniter.

Almond900

I will look at the distributor tomorrow, but I believe the the part # is 1181Ls from jegs and the coil is a 40111

Almond900

Distributor sold pending payment

Almond900

All engine parts are sold. Still have 71-72 hood for sale. New price $160

raxefab72

Any idea on shipping the hood to 27292?

Almond900

I can measure it today and check with Fastenal to get a rough idea, I don't have a way to weight it so I'll have to guess. I have no idea what they are for weight

raxefab72

Okay thanks!!

Almond900

No problem. If you want you can pm me your number and I can text you pics and the shipping cost later today