RAMBOW

Brand new made in USA seat spring rolls- The correct size for GM seats!

25ft Rolls of 9ga
25ft Rolls if 11ga
(9ga used in lower cushions, 11ga used in upper cushions)

$40 / 1-25ft roll
$60 / 2-25ft rolls
$80 / 3-25ft rolls
$100 / 4-25ft rolls

+shipping

email me: ben@classicseat.com

If you are redoing your seats, and have a handful of broken or badly rusted springs- these are exactly what you need.

I have these listed on ebay, but I'd rather sell directly to you guys and save the ebay hassle. Prices are slightly lower here as well.

** if you want longer or shorter lengths I can do that as well. let me know what you need.

DarrylJ

I have a 71 Cutlass Supreme with the front bench. The drivers side seat bottom is pretty soft, kind of like sitting in a hole! The rest of the seat is fine. How much do you think I would need for that side? I'm thinking 1 25 foot roll would be plenty but not sure since I haven't got it apart yet. Thanks!

RAMBOW

25 foot should be plenty unless you find yourself replacing every spring (doubtful it would need that).

Most often in bench seats when they go "soft" its the edge wire on the side where it attaches to the rear of the frame & outter side springs that are broken causing the lack of support.

The side springs are these funky "square" springs that are on the outter edge that break quite often- these can be replaced using the standard spring that I offer, just bend up to replicate the shape of the originals.

The edge wire is just 9ga steel rod, you can buy it at the HW store, then splice it into the original using spring edgewire clips.

RAMBOW

ttt