66 f85
#41
moved my lower radiator mounts and kinda mounted the radiator.
A373D140-4B1A-441C-848F-967A5C810176_zpsjoom6hfe.jpg
i finished up a mount to take the place of a power steering pump, wanted drivers side alternator.
F59C1A66-E54B-4F7E-9CB3-E53270AC4610_zpsz5dwgeuy.jpg
A373D140-4B1A-441C-848F-967A5C810176_zpsjoom6hfe.jpg
i finished up a mount to take the place of a power steering pump, wanted drivers side alternator.
F59C1A66-E54B-4F7E-9CB3-E53270AC4610_zpsz5dwgeuy.jpg
Last edited by young olds; February 5th, 2015 at 09:21 PM.
#42
I Worked oN my dash tonight, it was hacked for a radio. Still going to use a new style radio but I'm cleaning it up so it actually looks good. I'm running 6.5 components in front. Speakers in the kick panels and tweeters in the dash, where the factory speaker goes. So far I've got the tweeters mouned and I started working on where the radio goeS
5209506A-E970-4162-8B57-9508F6FB8125_zpsw5uizclt.jpg
A5628B38-8975-4856-81EF-F561385F20E7_zpsz3yciafb.jpg
C3434485-A790-48EF-AD09-3FC9E6084240_zpserundvds.jpg
5209506A-E970-4162-8B57-9508F6FB8125_zpsw5uizclt.jpg
A5628B38-8975-4856-81EF-F561385F20E7_zpsz3yciafb.jpg
C3434485-A790-48EF-AD09-3FC9E6084240_zpserundvds.jpg
#43
im not done but a bit further with the dash. added two usb chargers to the filler plate i made.
B28E3448-EB73-42FD-85C0-5DBFCFD6CA2B_zpsz2basmlz.jpg
FEB8682B-644B-4F7B-81E9-FC2D6E52BBBA_zpsff7nfx71.jpg
6FE37A29-5F1D-4DBB-8ACD-65791319A66A_zpszvhtbpoo.jpg
B28E3448-EB73-42FD-85C0-5DBFCFD6CA2B_zpsz2basmlz.jpg
FEB8682B-644B-4F7B-81E9-FC2D6E52BBBA_zpsff7nfx71.jpg
6FE37A29-5F1D-4DBB-8ACD-65791319A66A_zpszvhtbpoo.jpg
#45
#47
i ended up opening the engine today, and im glad i did.
9D629AC8-49D4-4D82-8D20-DD36EA2214A5_zps2wxvowpn.jpg
92A2916F-E80E-4AF8-9C1E-B9849A54B449_zpsqbr8tzc8.jpg
i could almost take the chain off
9D629AC8-49D4-4D82-8D20-DD36EA2214A5_zps2wxvowpn.jpg
92A2916F-E80E-4AF8-9C1E-B9849A54B449_zpsqbr8tzc8.jpg
i could almost take the chain off
#48
maw hit me on the engine. pulled intake and valve covers as well, put in a cam ive had laying around. ordered new chain and lifters and looking for holley street dominator intake
#52
After seeing the time frame on the cl ad. I didn't bother contacting them.
I knew it was already accounted for, or at least put me too far back on the waiting list. LOL
Good for you!
I knew it was already accounted for, or at least put me too far back on the waiting list. LOL
Good for you!
Last edited by nonhog; February 20th, 2015 at 08:08 AM. Reason: found page 2. LOL
#54
I got my intake today, from a member in here but I forget his name. Very clean intake, did some test fitting.
B10D9915-41C0-4532-B1F1-88B26386EFB5_zps2jb9i7os.jpg
The intake is taller than I expected, with a one inch spacer idk if I'll fit under the hood
B10D9915-41C0-4532-B1F1-88B26386EFB5_zps2jb9i7os.jpg
The intake is taller than I expected, with a one inch spacer idk if I'll fit under the hood
#55
i got my valve train done today, bolted on the intake. hope to break in the cam this weekend.
D2EEB5F9-3EC0-47D6-A532-C37E852D0E46_zps5kejuk2s.jpg
5F15D539-C1D9-4E13-8FCB-1ECF2792B367_zpsy3fhmp9z.jpg
D2EEB5F9-3EC0-47D6-A532-C37E852D0E46_zps5kejuk2s.jpg
5F15D539-C1D9-4E13-8FCB-1ECF2792B367_zpsy3fhmp9z.jpg
#56
hood clearance
Hey:
I can almost assure you the hood won't close, I found out the hard way in the 80's. I put a Torker Manifold on my Big Block when we did a major overhaul on my 66 Cutlass, we were headed to the Car Craft Street Machine Nationals in Illinois first of the week. The Cutlass had a brand new shiny paint and new engine rebuild as well, everything was fine till we installed and tried to close the hood. It was ALL BAD, wound up cutting a hole for clearance and putting a Butt Ugly small hood scoop on the car. Hope you have better results.
Thanks, Ron
I can almost assure you the hood won't close, I found out the hard way in the 80's. I put a Torker Manifold on my Big Block when we did a major overhaul on my 66 Cutlass, we were headed to the Car Craft Street Machine Nationals in Illinois first of the week. The Cutlass had a brand new shiny paint and new engine rebuild as well, everything was fine till we installed and tried to close the hood. It was ALL BAD, wound up cutting a hole for clearance and putting a Butt Ugly small hood scoop on the car. Hope you have better results.
Thanks, Ron
#58
I got my wires ran and hooked up for a rear mount battery. Not mounted yet but going to mount a box in the right rear most I can. Got the engine broke in the other day as well, sounds good
#59
video of it idling
https://www.youtube.com/watch?v=5LAB...ature=youtu.be
https://www.youtube.com/watch?v=5LAB...ature=youtu.be
#63
#66
#67
i finished my exhaust, was running out of the manifold now i have full exhaust. bought an x pipe kit from summit an already had the tail pipes on the car so he rest was easy to fab up.
https://www.youtube.com/watch?v=9bsV...ature=youtu.be
https://www.youtube.com/watch?v=9bsV...ature=youtu.be
#70
got her all buttoned up and in a drivable condition, this will probably be one of my last updates for a while. i had a jacked up control arm in the back so i modded mine, i think it'll be stronger than a boxed arm and it was free to do.
C5FB24BC-7560-4365-8584-291D005DA786_zpsorznso7w.jpg
AF16941F-B827-4775-945E-942EB568278A_zpsyisfcb52.jpg
0A8AC08F-C5EA-4601-A917-712F23AC4B9C_zpsikyljsqx.jpg
drove it a a bit and stopped to put some gas in her.
93975D62-5887-497D-8E18-52D0D84CE9AC_zpshatb3e7v.jpg
141042BA-1674-4100-9B2F-A71BE3BFEECA_zpsuwrhjawr.jpg
C5FB24BC-7560-4365-8584-291D005DA786_zpsorznso7w.jpg
AF16941F-B827-4775-945E-942EB568278A_zpsyisfcb52.jpg
0A8AC08F-C5EA-4601-A917-712F23AC4B9C_zpsikyljsqx.jpg
drove it a a bit and stopped to put some gas in her.
93975D62-5887-497D-8E18-52D0D84CE9AC_zpshatb3e7v.jpg
141042BA-1674-4100-9B2F-A71BE3BFEECA_zpsuwrhjawr.jpg
#75
Go ahead and send me a pm with what you would be looking for..
I'm interested, but likely its beyond my meager budget now that you've gotten it running & driving.
I really needed to snag it like you did, as a non-running, engine-less project. If I'd only sold my 66 a day quicker, it'd be me posting up pics of getting it on the road
I've got my eye on a 64 cutlass hardtop thats been sitting for a year or so on a back road near me. I've already tracked down the property owners contact info, probably going to make some calls in another month or so and see if it can be had for a reasonable amount, and find out its condition up close.
I'm interested, but likely its beyond my meager budget now that you've gotten it running & driving.
I really needed to snag it like you did, as a non-running, engine-less project. If I'd only sold my 66 a day quicker, it'd be me posting up pics of getting it on the road
I've got my eye on a 64 cutlass hardtop thats been sitting for a year or so on a back road near me. I've already tracked down the property owners contact info, probably going to make some calls in another month or so and see if it can be had for a reasonable amount, and find out its condition up close.
#76
been taking it slow but i am still working on the car when i have time. i put a new carpet in and got new, junkyard seats. first engine died so i replaced it with another 350 but got lucky and found one that had already been rebuilt with .030 over pistons and i mad sure this one had decent compression, feels way better than the old one. i took the short tires off and got a more appropriately sized tires, looks way better and now im considering lowering it. i also converted to h4 bulbs for headlights and i got lenses with halo rings. she needs a lot more work but she's shaping up.
E5429CF6-49BA-4E8D-B2DE-BAC96DF01DE2_zpspsplifrh.jpg
F9952942-6E57-44DB-935D-EE690124072D_zps9bdfslbz.jpg
CBB1DD7A-ED2E-4B43-A154-DDD6BE7021E4_zpsi4fc9ftw.jpg
E5429CF6-49BA-4E8D-B2DE-BAC96DF01DE2_zpspsplifrh.jpg
F9952942-6E57-44DB-935D-EE690124072D_zps9bdfslbz.jpg
CBB1DD7A-ED2E-4B43-A154-DDD6BE7021E4_zpsi4fc9ftw.jpg
#77
i also got this 4 wheel disk brake kit for $160! looks like everything is there but curious if im going to need anything else to make it work? i have 4 wheel drum brakes currently
8B0319F1-BF3C-432E-A643-961BA0BDF9FF_zpsrxzmpab9.jpg
8B0319F1-BF3C-432E-A643-961BA0BDF9FF_zpsrxzmpab9.jpg
#80
i ordered them from octane lighting on amazon, the bulbs that came with them were cheapo no name so i put sylvania bulbs in, the little notches that locate the bulbs rotationally were wrong so the outer bulbs i had to file two of and the inner ones i had to file off one. when i ordered i did make sure i got some with glass lens, and i figured the halos would look cool.