Seat belt straps removal
June 15th, 2015, 02:49 PM
#1
Registered User
Thread Starter
Join Date: Jul 2013
Location: Alexandria Virginia
Posts: 319
Seat belt straps removal
I am adding "Dynamat" to my floor board and I will replace the old molded carpet but I don't seem to be able to remove the seat belt straps. I don't want to damage anything but I could use some help.
June 15th, 2015, 03:40 PM
#2
Registered User
Join Date: Apr 2012
Location: New Mexico
Posts: 2,972
Sometimes you can squeeze the cover from opposite sides to get it off of the peg holding it. I have also had to use (very carefully) a flat blade screwdriver to coax it off. Once you have the cover off, you can use an end wrench (3/4" I believe) to loosen the bolt holding the retractor to the floor.
June 17th, 2015, 01:35 AM
#3
Registered User
Thread Starter
Join Date: Jul 2013
Location: Alexandria Virginia
Posts: 319
Sometimes you can squeeze the cover from opposite sides to get it off of the peg holding it. I have also had to use (very carefully) a flat blade screwdriver to coax it off. Once you have the cover off, you can use an end wrench (3/4" I believe) to loosen the bolt holding the retractor to the floor.
Thread
Thread Starter
Forum
Replies
Last Post
