Roger60

Does the frame from a 67 Cutlass (coupe and sedan) fit any later Cutlass or other A bodied models? Thanks

oldcutlass

No, its narrower than the later models.

Olds442redberet

Are you looking for a frame?

joe_padavano

The 68-72 frames are completely different from the 64-67 frames. Wider, different wheelbase, etc.

Olds442redberet

I believe 64-67 two door frames and four door frames interchangeable so finding a good four door parts car should be easy enough.

joe_padavano

Yes, since both body styles used the same 115" wheelbase in those years. Frame horns may vary by year due to core support differences (cross flow vs. down flow radiators). Only 1967 has the provision for TH400 crossmember location - this is especially important on the boxed convertible/HD frame where the crossmember bolts to a welded-on tab.

Of course, we don't know if this was the OP's real question.

Roger60

Actually, I have one for sale and was researching what else it might fit. Seems it fits only 66 and 67 2 and 4 door non conv.

lemoldsnut

66 is different at the upper rear spring perches.

Roger60

Great!. Good news is it's a one year only frame! Bad news is it's a one year only frame!

Olds442redberet

It might take awhile to sell but it's worth a few dollars to the right guy.