ClassicOldsmobile.com  

Go Back   ClassicOldsmobile.com > Repair & Restoration > Electrical
Forums Gallery Encyclopedia Tech Olds Junction Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 05-05-2006, 07:55 PM   #1 (permalink)
jrbarrie83
Junior Member
 
Join Date: Jun 2005
Location: Bulger, PA
Posts: 14
Send a message via AIM to jrbarrie83
Question 86 442 Power Locks & Windows

Just bought the car a few weeks ago and LOVE IT!!! Drivers power lock switch only unlocks passenger door but doesn't lock it while passenger switch locks and unlocks same door (but you have to really push!). Drivers door does nothing for either switch. Also, drivers power window just quit working. Could this all be related? I have a motor from my old 93 Achieva when it's windows quit but then restarted ... would that motor fit or do I need a new one?? And to get to all this, I'll need to get the door panel off. Any advice before I just start pulling at things?? Any words of advice would be GREATLY appreciated!
Thanks!
Jim
jrbarrie83 is offline   Reply With Quote
Old 05-08-2006, 10:40 AM   #2 (permalink)
Oldsguy
Administrator
 
Oldsguy's Avatar
 
Join Date: May 2004
Location: Lees Summit MO
Posts: 2,859
It sounds like you might have some intermittent switches. A common problem with power switches in the doors because all it takes is one time with the window down in a rain and they can get corrosion that only gets worse with time. Sounds like you have tried to eliminate the switch from the motor but in the case of the driver's window it could be either. I am not sure if the motor from a later model car would work, your best bet would be to physically compare them side by side and see if they are the same in appearance and part number. About the inside panels, that can be tough. I have never removed one from that year and model Olds. I understand your reluctance to just start ripping things out, almost universally the arm rest comes loose first with long screws that secure it to the inner door metal, then from there the panel/panels. There may be some screws or not. Usually along the bottom they use pop in friction retainers. Hopefully someone will respond with some first hand knowledge. Good luck.
__________________
Dan
'46 2 door
Oldsguy is offline   Reply With Quote
Old 07-04-2006, 09:16 AM   #3 (permalink)
ozoneblue
Senior Member
 
Join Date: Jun 2006
Posts: 407
Send a message via Yahoo to ozoneblue
door locks

Clean door lock switches by soaking them in white vinegar work them back & forth let soak .check wireing in door post they often break from opening &closing doors
ozoneblue is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
paint code SX455 Cutlass 1 02-01-2007 06:57 PM
doors for 87 cutlass 2 door skip Parts For Sale 0 12-07-2006 04:02 PM
vehicle identification wylie Cutlass 1 10-02-2006 07:50 PM
72 Olds Cutlass S hardtop 4sale - $3500 US obo rallye350 Cars For Sale 0 05-26-2006 07:49 PM
New guy daverbmxer Cutlass 3 05-26-2006 05:18 AM


All times are GMT -7. The time now is 01:20 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0
All content Copyright © 2008 by Internet Brands, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34