Does 67 Cutlass rear speaker attach with a bracket?

Flye · August 11th, 2009, 08:58 AM

Thanks to all who have given me some great guidance on the front speaker.

It appears the back speaker was changed at some point (not Delco), and is definitely way beyond its usefulness at this point.

What size should it be?

Does it mount with one of those overlap type brackets or just t-bolt up to the bottom of the shelf?

If it takes a bracket, I guess I can put yet another WANTED ad on here, becuase the one on it is just screwed up to the rear deck metal.

Thanks as always.

D

radioburningchrome · August 11th, 2009, 03:41 PM

Speaker should be 6x9. Carriage bolts or screws will work in place of "T" screws.

Chances are the original speaker had a factory cover that clipped to the magnet. Unless you a doing a 100 point restoration an aftermarket speaker will work.

August 11th, 2009, 08:58 AM	#1 (permalink)
Flye Registered User Join Date: Mar 2009 Location: Virginia Beach, VA Posts: 134	Does 67 Cutlass rear speaker attach with a bracket? Thanks to all who have given me some great guidance on the front speaker. It appears the back speaker was changed at some point (not Delco), and is definitely way beyond its usefulness at this point. What size should it be? Does it mount with one of those overlap type brackets or just t-bolt up to the bottom of the shelf? If it takes a bracket, I guess I can put yet another WANTED ad on here, becuase the one on it is just screwed up to the rear deck metal. Thanks as always. D

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
69 Cutlass S Convertible Rear Speaker	Saskatchewan Cutlass	Electrical	45	March 4th, 2009 02:51 PM
rear speaker recommendations	68Tom	General Discussion	8	February 25th, 2009 06:13 PM
69 88 Convertible Rear Speaker Grill	bcg88	Eighty-Eight	5	October 11th, 2008 11:42 AM
Olds Rear Seat Speaker ID	kipp	Interior/Upholstery	3	July 14th, 2008 04:12 PM
72 convertible rear speaker	Sam Barrett	442	7	May 28th, 2008 01:12 PM

August 11th, 2009, 03:41 PM	#2 (permalink)
radioburningchrome Registered User Join Date: Jan 2009 Location: Hellertown PA Posts: 62	Speaker should be 6x9. Carriage bolts or screws will work in place of "T" screws. Chances are the original speaker had a factory cover that clipped to the magnet. Unless you a doing a 100 point restoration an aftermarket speaker will work.