Lug pattern for 71' cutlass

Trouble · January 25th, 2008, 11:11 AM

Does anyone know the lug pattern for a 71' cutlass?

Trouble · January 25th, 2008, 11:12 AM

Or measurments for the pattern?

2blu442 · January 25th, 2008, 12:40 PM

It's 5 on 4 3/4 (5 lugs on a 4 3/4" spacing) which is the same for GM midsized for many years through the 1960's, 1970's into the 1980's and probably more. John

joe_padavano · January 25th, 2008, 01:59 PM

Quote:

Originally Posted by 2blu442

It's 5 on 4 3/4 (5 lugs on a 4 3/4" spacing) which is the same for GM midsized for many years through the 1960's, 1970's into the 1980's and probably more. John

All 1964-1988 GM RWD A/G body cars used the 5 x 4.75" bolt circle. Others using the same pattern were F-body (Camaro/Firebird), X-body (Nova and clones), Corvette, and some B-body cars (60s Impalas, 64-66 Jetstar 88, and some 77-90 B-body sedans).

blue burban · January 26th, 2008, 09:10 AM

As well as the S-10/T-10 trucks and blazers
S=2WD
T=4WD

January 25th, 2008, 11:11 AM	#1 (permalink)
Trouble Junior Member Join Date: Jan 2008 Location: Houston, Tx. Posts: 3	Lug pattern for 71' cutlass Does anyone know the lug pattern for a 71' cutlass?

January 25th, 2008, 12:40 PM	#3 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,257	It's 5 on 4 3/4 (5 lugs on a 4 3/4" spacing) which is the same for GM midsized for many years through the 1960's, 1970's into the 1980's and probably more. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stud Pattern for a 67 Delta 88 Custom ?	Aussie67Delta88Custom	Brakes/Hydraulic Systems	6	January 17th, 2008 06:16 AM
Questions on 71' 455	Trouble	Big Blocks	2	January 9th, 2008 03:20 PM
what you thinking about this pattern???	denis	Drivetrain/Differentials	1	September 13th, 2007 10:03 PM
olds/mercury bolt pattern?	2 door cut	Other	2	May 20th, 2007 12:34 PM
Our 71' cutlass S	smason	Cutlass	8	December 27th, 2006 12:20 PM

January 25th, 2008, 11:12 AM	#2 (permalink)
Trouble Junior Member Join Date: Jan 2008 Location: Houston, Tx. Posts: 3	Or measurments for the pattern?

January 26th, 2008, 09:10 AM	#5 (permalink)
blue burban Junior Member Join Date: Jan 2008 Posts: 12	As well as the S-10/T-10 trucks and blazers S=2WD T=4WD