I Need Interior Door Handle Help

Skinny Puppy · 03-14-2007, 04:45 AM

Please tell me how to replace the driver's side interior door handle on a '95 Ciera.

keith6989 · 03-14-2007, 05:03 AM

I think there is a special too you can buy to do this. You can get it at any good parts store. This guy bought one and used it on his 85 http://www.classicoldsmobile.com/for...oor-panel.html

Good luck, let us know how it works out for you.

Skinny Puppy · 03-14-2007, 06:34 AM

because there is a smaller panel around the lock and handle. I opened it up and looked but, frankly, I could not figure out how to remove the broken handle.

keith6989 · 03-14-2007, 03:42 PM

Do you have a picture you can upload so we can get a better look at what you are dealing with?

Jim's rare 80 · 03-15-2007, 01:14 AM

Hi. I'm pretty sure you will need to remove the door panel, and the handle is riveted on to the door. The handle slips into place, then held securely by one big rivet. I changed one on a nieghbours last summer. (Buick, but same car) Handles are easy to get. PM me, if you need more. Hope this helps. Jim.

03-14-2007, 04:45 AM	#1 (permalink)
Skinny Puppy Junior Member Join Date: Dec 2006 Posts: 4	I Need Interior Door Handle Help Please tell me how to replace the driver's side interior door handle on a '95 Ciera.

03-14-2007, 05:03 AM	#2 (permalink)
keith6989 2Blue 55" Join Date: Dec 2006 Location: Nova Scotia, Canada Posts: 377	I think there is a special too you can buy to do this. You can get it at any good parts store. This guy bought one and used it on his 85 http://www.classicoldsmobile.com/for...oor-panel.html Good luck, let us know how it works out for you. __________________ Robert 1955 Oldsmobile Super 88

03-14-2007, 06:34 AM	#3 (permalink)
Skinny Puppy Junior Member Join Date: Dec 2006 Posts: 4	I'm hoping I don't have to remove the door panel... because there is a smaller panel around the lock and handle. I opened it up and looked but, frankly, I could not figure out how to remove the broken handle.

03-14-2007, 03:42 PM	#4 (permalink)
keith6989 2Blue 55" Join Date: Dec 2006 Location: Nova Scotia, Canada Posts: 377	Do you have a picture you can upload so we can get a better look at what you are dealing with? __________________ Robert 1955 Oldsmobile Super 88

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-15-2007, 01:14 AM	#5 (permalink)
Jim's rare 80 Senior Member Join Date: Feb 2007 Posts: 200	Hi. I'm pretty sure you will need to remove the door panel, and the handle is riveted on to the door. The handle slips into place, then held securely by one big rivet. I changed one on a nieghbours last summer. (Buick, but same car) Handles are easy to get. PM me, if you need more. Hope this helps. Jim.