Power windows

Chumley · 02-11-2007, 03:54 PM

Other than the motors and switches of course, are there any other mechanical parts needed to convert from manual to power windows?

Chumley

2blu442 · 02-11-2007, 05:29 PM

The regulators that the motors attach to and that run the glass up and down, they're different. Then there is a hole cut in the doorjam for the wiring to go between the door and into the car. What year/model are you wanting to put power windows into? John

02-11-2007, 03:54 PM	#1 (permalink)
Chumley Senior Member Join Date: Dec 2005 Posts: 162	Power windows Other than the motors and switches of course, are there any other mechanical parts needed to convert from manual to power windows? Chumley

02-11-2007, 05:29 PM	#2 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 871	The regulators that the motors attach to and that run the glass up and down, they're different. Then there is a hole cut in the doorjam for the wiring to go between the door and into the car. What year/model are you wanting to put power windows into? John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode