1965-67 B body Offset C.A. shafts?
#1
1965-67 B body Offset C.A. shafts?
Hi guys! I feel like this question may have been asked before given how common frame sag is on older cars, but I couldn't find a relevant thread so here goes:
I am looking to purchase a set of offset control arm shafts to correct the camber issue in my 65 88. I completely rebuilt the front end with the correct parts a number of years back, which lessened the issue, but two different shops informed me that they could only just barely not get it into spec with regards to camber. There are currently several shims on both control arms. The wear on the inside of my tires is becoming an expensive problem to correct.
I am wondering if these are available or if there is a set of offset control arms for A bodies that would work for these B body control arms. I searched around but a lot of websites don't even list these type of suspension components for 65 B body cars.
I am looking to purchase a set of offset control arm shafts to correct the camber issue in my 65 88. I completely rebuilt the front end with the correct parts a number of years back, which lessened the issue, but two different shops informed me that they could only just barely not get it into spec with regards to camber. There are currently several shims on both control arms. The wear on the inside of my tires is becoming an expensive problem to correct.
I am wondering if these are available or if there is a set of offset control arms for A bodies that would work for these B body control arms. I searched around but a lot of websites don't even list these type of suspension components for 65 B body cars.
Thread
Thread Starter
Forum
Replies
Last Post
geckonz08
Transmission
3
March 17th, 2010 04:50 PM
monzaz
Parts For Sale
1
July 6th, 2009 07:51 PM