chrome removeal on convertable

dynamic88 · October 2nd, 2007, 01:27 PM

throw this out there. i worked all day stripping all the chrome off my 65 olds dynamic 88 convertable in order to get ready for body work. i could not get the rear chrome piece off around the back lid that the boot snaps onto. i can see there are clips on it, but i could not get them to release. they are not like the clips on the front windshield. is anyone a little more familiar w/ these pieces and how you get them to release. thanks chris

Oldsguy · October 3rd, 2007, 05:47 AM

Is there any way at all that you can get a visual of the backside of part of that? I really don't know but was just thinking that might be able to lead you in the right direction, other than getting a Factory Service Manual. Those things are invaluable.

dynamic88 · October 3rd, 2007, 06:47 AM

yes you can see the back lip. i was thinking the same thing last night. i wounder if i can get my tool in behind it and slip it over the top from the back and see if it would release that way. i have all the service manuals for it. it has a section on body clips for all the olds in 65, but either you have to be smarter than me (which does not take much) or read greek, to figure out what their talking about. i will try again today. thanks chris

dynamic88 · October 4th, 2007, 09:01 PM

i figured out how to get it off. there were a couple screws on the ends on the inside and three on the outside. you just take those out and then take a small block of wood and a hammer and gentle tap on the bottom of the chrome and just back it up off the car frame.

Oldsguy · October 5th, 2007, 05:50 AM

Good! Glad you were able to get it off.

October 2nd, 2007, 01:27 PM	#1 (permalink)
dynamic88 Registered User Join Date: Oct 2006 Location: New Bremen Ohio Posts: 219	chrome removeal on convertable throw this out there. i worked all day stripping all the chrome off my 65 olds dynamic 88 convertable in order to get ready for body work. i could not get the rear chrome piece off around the back lid that the boot snaps onto. i can see there are clips on it, but i could not get them to release. they are not like the clips on the front windshield. is anyone a little more familiar w/ these pieces and how you get them to release. thanks chris

October 3rd, 2007, 05:47 AM	#2 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,360	Is there any way at all that you can get a visual of the backside of part of that? I really don't know but was just thinking that might be able to lead you in the right direction, other than getting a Factory Service Manual. Those things are invaluable. __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

October 5th, 2007, 05:50 AM	#5 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,360	Good! Glad you were able to get it off. __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cleaning up chrome and glass	dynamic88	Interior/Upholstery	7	February 13th, 2008 08:54 PM
chrome headlight bezel	dynamic62	Parts Wanted	7	June 7th, 2007 12:00 PM
chrome plating	mr-tom	442	1	March 16th, 2007 10:28 PM
69 wheel well chrome	Want-A-Vert	Parts Wanted	1	February 13th, 2007 12:48 PM

October 3rd, 2007, 06:47 AM	#3 (permalink)
dynamic88 Registered User Join Date: Oct 2006 Location: New Bremen Ohio Posts: 219	yes you can see the back lip. i was thinking the same thing last night. i wounder if i can get my tool in behind it and slip it over the top from the back and see if it would release that way. i have all the service manuals for it. it has a section on body clips for all the olds in 65, but either you have to be smarter than me (which does not take much) or read greek, to figure out what their talking about. i will try again today. thanks chris

October 4th, 2007, 09:01 PM	#4 (permalink)
dynamic88 Registered User Join Date: Oct 2006 Location: New Bremen Ohio Posts: 219	i figured out how to get it off. there were a couple screws on the ends on the inside and three on the outside. you just take those out and then take a small block of wood and a hammer and gentle tap on the bottom of the chrome and just back it up off the car frame.