Floor Pans

jasonjtrahan · September 17th, 2007, 09:25 PM

Hey there,
I have a 66 delta 88 4 door with a rusted floor pan on the drivers side. I have yet to find a replacment, but have been told that a cutlass pan will work??? The pan will be replaced from under the seat to the toe board. Any comments would help. Thanks Jason

Oldsguy · September 18th, 2007, 08:15 AM

Have you checked Kanter or Fusick on the internet?

http://www.fusick.com/

http://www.kanter.com/

joe_padavano · September 18th, 2007, 10:54 PM

Quote:

Originally Posted by jasonjtrahan

Hey there,
I have a 66 delta 88 4 door with a rusted floor pan on the drivers side. I have yet to find a replacment, but have been told that a cutlass pan will work??? The pan will be replaced from under the seat to the toe board. Any comments would help. Thanks Jason

The 88 is a B-body, which is longer and wider than the A-body Cutlass. You can make anything work, but it will require quite a bit of work. A better choice would be Impala/Caprice floor pans. All 65-70 B-body cars should be the same.

September 17th, 2007, 09:25 PM	#1 (permalink)
jasonjtrahan 455 ROCKET ! Join Date: Sep 2007 Location: TEXAS Posts: 4	Floor Pans Hey there, I have a 66 delta 88 4 door with a rusted floor pan on the drivers side. I have yet to find a replacment, but have been told that a cutlass pan will work??? The pan will be replaced from under the seat to the toe board. Any comments would help. Thanks Jason

September 18th, 2007, 08:15 AM	#2 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,360	Have you checked Kanter or Fusick on the internet? http://www.fusick.com/ http://www.kanter.com/ __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1959 Floor Pans	19594mydad	Chassis/Body/Frame	5	July 8th, 2007 08:42 PM
81-88 Cutlass Truck Pans	87CUTTY	Cutlass	1	May 1st, 2007 12:55 PM
Question about Floor pans for 88's	bmwashington	Chassis/Body/Frame	9	April 25th, 2007 11:21 AM
my floor rebuild.. what ya think?	Droptop	Chassis/Body/Frame	13	October 9th, 2006 07:59 PM
Toronado intakes oil pans and motor mounting harware wanted	B.O.P. Connection	Parts Wanted	0	October 30th, 2004 12:34 AM