Door Hinge Pin with detent roller
#1
Door Hinge Pin with detent roller
Need to replace the hinge pin on the drivers side door with the roller that the little arm glides across when you open and close the door. The roller is almost coming completely off. I'm buying a door hinge repair kit that include the pin with the roller.
How do I remove the spring on the hinge so that we can get the pin with the roller out?
Does the whole pin come out with the roller included from the hinge and then you slide the new pin with roller back through the empty slots?
Thanx everyone
How do I remove the spring on the hinge so that we can get the pin with the roller out?
Does the whole pin come out with the roller included from the hinge and then you slide the new pin with roller back through the empty slots?
Thanx everyone
#4
And old thread but---how did you remove the old hinge?
I have a '67 with the same problem but I am struggling with how to remove the hinge, etc.
Tight spot and some kind of strange wrench needed?
From there I guess you drill out the old pin. OPGI has a replacement pin (stub) with roller.
Part #CHV0469
I have a '67 with the same problem but I am struggling with how to remove the hinge, etc.
Tight spot and some kind of strange wrench needed?
From there I guess you drill out the old pin. OPGI has a replacement pin (stub) with roller.
Part #CHV0469
#5
Here is the OPGI repair kit URL:
http://www.opgi.com/p/body-moldings-...5/CHV0469.html
http://www.opgi.com/p/body-moldings-...5/CHV0469.html
#8
Willie will restore your originals or sale you the replacement parts.
http://www.hoodhingerepair.com/
http://www.hoodhingerepair.com/
#9
You can also repair your own hinges at home to be as good as new.
Here's my tale...
https://classicoldsmobile.com/forums...storation.html
Here's my tale...
https://classicoldsmobile.com/forums...storation.html
#11
There is a special wrench for removing the hinges, but I was able to get mine on an off with standard wrenches, a ratcheting box wrench, and an offset box wrench.
Earlier and later in my interior makeover thread, I described how I did it.
Earlier and later in my interior makeover thread, I described how I did it.
Thread
Thread Starter
Forum
Replies
Last Post