1970 442 Street Strip project
October 29th, 2013, 11:37 AM
#1
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 10
1970 442 Street Strip project
Up for sale is my 1070 442 which I have owned since 1991. I tore the car down in 2000 to repair minor rust in the toe pan and the typical light rust around the rear wheel lip. The car recieved new aftermarket quarter panels, the frame was blasted and black epoxy painted and the .095 wall moly 6 point cage was installed.
(see pics in gallery under Martys 70 442 for sale)
The rear suspension is a powder coated Chev 12 bolt with welded tubes, strange axles, strange spool, wilwood disks, an HPC coated Ultimate 12 girdle and a Mark Williams 1350 billet yolk.
The arms shocks(QA1) and springs are a Dick Miller kit.
The stock tank is sumped.
The front suspension is totally detailed stock disk components.
The body work is complete including new GM 71-72 fenders. The color is Cranberry red which has the base coat applied and is ready for sripes and clear. The dash and firewall have been painted the correct flat black.
The hood on the car is a Year One all fiberglass unit that is painted the 1991 color of the car as I was not sure I was going to use it.
The amount of time and money in this car is stupid and the cost to duplicate would easily be aproaching 20K.
Asking 10k
Please call only if seriously interested, I dont need opinions on what its worth and I dont have to sell it.
Thank you for your consideration.
Marty, 704-779-1759
I can send more pics via e mail.
(see pics in gallery under Martys 70 442 for sale)
The rear suspension is a powder coated Chev 12 bolt with welded tubes, strange axles, strange spool, wilwood disks, an HPC coated Ultimate 12 girdle and a Mark Williams 1350 billet yolk.
The arms shocks(QA1) and springs are a Dick Miller kit.
The stock tank is sumped.
The front suspension is totally detailed stock disk components.
The body work is complete including new GM 71-72 fenders. The color is Cranberry red which has the base coat applied and is ready for sripes and clear. The dash and firewall have been painted the correct flat black.
The hood on the car is a Year One all fiberglass unit that is painted the 1991 color of the car as I was not sure I was going to use it.
The amount of time and money in this car is stupid and the cost to duplicate would easily be aproaching 20K.
Asking 10k
Please call only if seriously interested, I dont need opinions on what its worth and I dont have to sell it.
Thank you for your consideration.
Marty, 704-779-1759
I can send more pics via e mail.
October 30th, 2013, 04:46 AM
#5
Registered User
Join Date: Oct 2009
Location: Erie,PA
Posts: 3,814
November 18th, 2013, 08:34 AM
#6
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 10
Pictures
http://s1361.photobucket.com/user/cr...86722995891032
I hope this works!!!
Sorry not to computer savy.
Fenders Drillled for W30 emblems and NOS emblems.
Surely someone is wanting a 70 442 Orig./ W30 clone racecar/streetcar????
I hope this works!!!
Sorry not to computer savy.
Fenders Drillled for W30 emblems and NOS emblems.
Surely someone is wanting a 70 442 Orig./ W30 clone racecar/streetcar????
February 18th, 2014, 05:25 PM
#16
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 10
bump
to the top. needs to go. also have a 461 e brock headed ti valve. t and d rockers, solid roller, JE pistons, Manley steel rods, steel 425 crank. steel SFI flywheel that could be part of the deal.
Thread
Thread Starter
Forum
Replies
Last Post
anthonylenhardt
Cars For Sale
1
March 29th, 2007 07:54 AM
anthonylenhardt
Cars For Sale
0
March 28th, 2007 11:30 PM
<johnny5>
Cars Wanted
0
August 25th, 2005 12:46 PM
